The Relation of Crystallite Size and Ni<SUP>2+</SUP> Content to Ferromagnetic Resonance Properties of Nano Nickel Ferrites

Sadeq H. Lafta

doi:10.4283/JMAG.2017.22.2.188

주제분류

...

저널정보

한국자기학회
Journal of Magnetics 학술저널
Journal of Magnetics Vol.22 No.2
2017.6 188 - 195 (8page)
DOI : 10.4283/JMAG.2017.22.2.188

저자정보

Sadeq H. Lafta (University of Technology)

이용수
내서재: 0

내서재에 추가
되었습니다. 내서재에서
삭제되었습니다.

초록·키워드

오류제보하기

The ferromagnetic resonance and other magnetic properties dependence on Ni²⁺/Fe³⁺ ratio and crystallite size were investigated for nano nickel ferrite (NiFe₂O₄). The crystallite size was controlled by controlling the nickel content in the starting material solution. The XRD and TEM were utilized to measure the crystallite size through Scherrer formula and particle size respectively. The most frequent particle sizes were lower than crystallite size, which ranged from 16.5 to 44.65 ㎚. The general behavior of M-H loop shapes and parameters showed superparamagnetic one. The saturation magnetization had a maximum value at Ni²⁺/Fe³⁺ molar ratio equal to 0.186. The FMR signals showed, generally, broad linewidths, where the maximum width and minimum resonance field were for the sample of the lowest crystalline size. Furthermore, FMR resonance field shows linear dependence on crystalline size. The fitting relation was estimated to express this linear dependency on the base of behavior coincidence between particle size and the inverse of saturation magnetization. The given interpretations to understand the intercept and the slope meanings of the fitted relation were based on Larmor equation, and inhomogeneous in the anisotropy constant.

#ferromagnetic resonance #resonance field #crystallite size #Nano Ni-ferrite #FMR linewidth