This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Truck Deformation Classification
- Ground Vehicle Standard
- J1301_200308
- Reaffirmed
Sector:
Issuing Committee:
Language:
English
Scope
The scope and purpose of this SAE Recommended Practice is to provide a classification system for deformation sustained by trucks involved in collisions on the highway. Application of the document is limited to medium trucks, heavy trucks, and articulated combinations.1
The TDC classifies collision contact deformation, as opposed to induced deformation, so that the deformation is segregated into rather narrow limits or categories. Studies of collision deformation can then be performed on one or many data banks with assurance that data under study are of essentially the same type.2
Many of the features of the SAE J224 MAR80 have been retained in this document, although the characters within specific columns vary. Each document must therefore be applied to the appropriate vehicle type. It is also important to note that the Truck Deformation Classification (TDC) does not identify specific vehicle configurations and body types.
The TDC is an expression, useful to persons engaged in vehicle safety, to appropriately describe a collision-damaged truck with conciseness in oral and written communications. The TDC is also a research tool; however, it has not been designed for use in impact energy computation. The research community is cautioned not to attempt direct conversion calculations from the TDC to energy equivalents required to duplicate the damage.
The system consists of seven alphanumeric characters arranged in a specific order to form a descriptive composite of the vehicle damage (see Figure 1). The characters describe the principal force direction, location, specific area, type, and extent of damage.
The individual character positions are referenced by column number for identification. The definition of each classification is provided in subsequent sections.
Recommended Content
Topic
Data Sets - Support Documents
No Datasets Available
Issuing Committee
Accident Investigation and Reconstruction Practices Cmte
The SAE Accident Investigation and Reconstruction Practices (AIRP) Technical Standards Committee is dedicated to the development of recommended practices and information reports in the fields of accident reconstruction/analysis.
STRUCTURE: The committee is composed of a series forums dealing with broad issues dealing with accident investigation and reconstruction. The forums are also based for the Task Forces that develop the J-standards. Current forums and task forces include Collision Damage and Classification, J224; Truck Damage Classification, J1301; Early Acquisition and Preservation of Information, J1674; Accident Reconstruction and Terminology, J1675; Generalized Damage Measurement, J1676; Event Data Records; Motor Vehicle Fire Investigation Advisory Group; Vehicle-Road Friction Measurement, J2505; Uncertainty in Accident Reconstruction; Accident Reconstruction Technology Collection, ARDC2007.Reference
| Number | Title |
|---|---|
| 700136 | Collision Damage Severity Scale |
| 810215 | Collision Deformation Classification for Trucks |
| J224_201702 | Collision Deformation Classification |
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.