This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Cable, Electric, Filter Line, Radio Frequency Absorptive
- Aerospace Standard
- AS85485
- Issued
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
This specification covers the requirements for radio frequency absorptive component wires and finished cables which function electrically as distributed low-pass filters. Materials and construction details are specified in the applicable specification sheet.
Recommended Content
Topic
Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 | ||
Unnamed Dataset 5 | ||
Unnamed Dataset 6 | ||
Unnamed Dataset 7 | ||
Unnamed Dataset 8 | ||
Unnamed Dataset 9 | ||
Unnamed Dataset 10 | ||
Unnamed Dataset 11 | ||
Unnamed Dataset 12 | ||
Unnamed Dataset 13 | ||
Unnamed Dataset 14 | ||
TABLE I | Details of conductors. | |
Unnamed Dataset 16 | ||
TABLE II | Minimum continuous lengths. | |
Unnamed Dataset 18 | ||
Unnamed Dataset 19 | ||
Unnamed Dataset 20 | ||
TABLE III | Properties of component wire and finished cable. | |
TABLE III | (Continued) | |
TABLE IV | Quality conformance inspection. | |
TABLE IV | (continued) | |
TABLE V | Process Control Inspection. | |
TABLE VI | Tests applicable only to qualification inspection and qualification re-evaluation. | |
TABLE VII | Mandrel diameters for cables for bend test, crosslinking proof test, immersion, life cycle and low temperature (cold bend). | |
TABLE VIII | Immersion test fluids. | |
TABLE IX | Cable geometry factor (B). | |
TABLE X | Barrel diameters of spools and reels. | |
Unnamed Dataset 31 |
Issuing Committee
AE-8D Wire and Cable Committee
SAE Subcommittee AE-8D Wire & Cable, shall be associated with those activities directed by the parent SAE Aerospace Council, the SAE Aerospace Electronics & Electrical System Division, and the SAE AE-8 Aerospace Electrical/Electronic Distribution Systems Committee, for the development and application of wires and cables and associated hardware standards and specifications.
Reference
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.