This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Extension of One-Dimensional Boundary Conditions for Junction to Those for Other Pipe Elements
Annotation ability available
Sector:
Language:
English
Abstract
In order to unify the boundary conditions for various pipe elements and to simplify the computer code, the one-dimensional boundary conditions for three-way junction are extended to those for some pipe elements such as a nozzle and an elbow. To examine whether the extended boundary conditions are useful or not, the pulsatile flow through the pipe with the nozzle or elbow are numerically simulated using a Random-Choice Method and then the results are compared with those by the experiments. As a result, good agreement was found between experiments and calculations as long as the pressure histories are concerned and the extension of the boundary conditions is found to be valuable.
Authors
Citation
Endo, M. and Iwamoto, J., "Extension of One-Dimensional Boundary Conditions for Junction to Those for Other Pipe Elements," SAE Technical Paper 961821, 1996, https://doi.org/10.4271/961821.Also In
References
- Endo M. Iwamoto J. “The Influence of Wave Action on Mass Flow Rate through Pipes” SAE Paper 911724 1991
- Takayama K. et al. “Shock Wave Development and Propagation in Automobile Exhaust Systems” SAE Transactions 880082 466 472 1989
- Benson R. S. Woollatt D. “A Numerical Solution of Unsteady-Flow Problem” The British Shipbuilding Research Association 1961
- Benson R. S. “Some Recent Research on Non-Steady Flow problems” Flow Measurement Symposium ASME 80 102 1966
- Takizawa M. et al. “A Study of Gas Exchange Process Simulation of an Automotive Multi-Cylinder Internal Combustion Engine” SAE Paper 820410 1982
- Endo M. Iwamoto J. “A Numerical Study of Pulsating Flow With and Without a Nozzle” SAE Paper 900678 1990
- Endo M. Iwamoto J. “A Numerical Study of Pulsating Flow in a Duct with a Junction” SAE Transactions 911783 1482 1487 1992
- Endo M. Iwamoto J. “Computer Simulation of One-Dimensional Pulsating Pipe Flow with Diffuser” SAE Paper 921724 1992
- Pearson R. J. Winterbone D. E. “Calculation of one-dimensional unsteady flow in internal combustion engines - how long should it take?” Third International Conference on Computers in Reciprocating Engines and Gas Turbines IMechE 1996 193 202
- Endo M. Iwamoto J. “Numerical Analysis of Pulsatile Flow in Pipe System with Three-way Junction” SAE Paper 952068 1995
- Iwamoto J. “Experimental Investigation of a Rotary Valve” TDU Technical report 22 127 150 1974