This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
The Development of Integrated CAD/CAM System on Engineering Workstation
Annotation ability available
Sector:
Language:
English
Abstract
This paper describes an integrated CAD/CAM system on an EWS. This system is based on the CAD and CAM systems on large scale computers which have been developed and put into practical use in Toyota Motor Corporation. All the functions of these systems are compactly integrated into this system. We have established the following technologies through its development.
- (1) A method for construction of data structure common to CAD and CAM
- (2) A database structure that enables efficient data retrievals
Owing to these technologies, a non-expensive integrated CAD/CAM system on an EWS has been developed, which can be introduced in small-sized parts suppliers. This system has already been put into practical use since early 1988, and used by more than ten suppliers. Much more suppliers are also planning to introduce this system in near future.
Authors
Topic
Citation
Yoshimi, J., Araki, H., Mori, T., and Nonaka, M., "The Development of Integrated CAD/CAM System on Engineering Workstation," SAE Technical Paper 870927, 1987, https://doi.org/10.4271/870927.Also In
References
- Ohara M. Higashi H. “Integration of CAD/CAM System in Automotive Body Engineering” Compter & Graphics 1983
- Higashi M. Kozen J. nagasaka J. “An Interactive CAD System for Construction of Shapes with High-Quality surface” Proc. CAPE'83 April 1983
- sakai Y. kuranaga Y. “The Development of CADETT System”
- Higashi M. Mori T. Taniguchi H. Yoshimi J. “Geometric modelling for Efficient Evaluation of Press Forming Severity” Proc. AIME 1985
- Araki H. Kawai M. Amano Y. Nonaka H. “Replacement of Physical Models by Highly Accurate numerical Models for Manufacturing stamping Dies in the integrated CAD/CAM System” Proc. PROLAMAT 1985
- Araki H. Niwa S. makino T. Yoshinaka R. “Computer Aided Finishing System for stamping Die Manufacturing”
- Baumgart B. “A polyhedron representation for computer vision” National Computer Conference 1975