This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Hybrid Computer System for the Simulation of Vehicle Dynamics
Annotation ability available
Sector:
Language:
English
Abstract
Simulation of the dynamics of pneumatic tired vehicles often severely strains the capabilities of ordinary analog and digital computers. This paper shows why a hybrid computer, combining the best features of both the analog and the digital, is ideally suited to vehicle dynamics simulation. The elements of a typical modern hybrid computer system are outlined, and the rationale behind the specification of such a system for vehicle dynamics simulation is given.
Authors
Citation
Murphy, R., "A Hybrid Computer System for the Simulation of Vehicle Dynamics," SAE Technical Paper 700154, 1970, https://doi.org/10.4271/700154.Also In
References
- Jeska R. D. “A Comparison of Real and Simulated Automobile Suspension Systems.” Univ. of Michigan Willow Run Research Center February 1953
- Carlson J. A. “Analytical and Experimental Studies of Vehicle Dynamic Behavior,” Industrial Mathematics 7 1956
- Segel L. “Theoretical Prediction and Experimental Substantiation of the Response of the Automobile to Steering Control.” Proc. of the Automobile Div., Institute of Mechanical Engineers 7 1956-7 310
- Sattinger I. J. Smith D. F. “Computer Simulation of Vehicle Motion in Three Dimensions.” Willow Run Laboratories, The Univ. of Michigan May 1960
- Kohr R. H. “Analysis and Simulation of Automobile Ride.” SAE Transactions 69 1961 110 119
- Bundorf R. T. Pollock D. E. Hardin M. E. “Vehicle Handling Response to Aerodynamic Inputs.” SAE Transactions 72 1964
- Ellis J. R. “The Dynamics of Vehicles During Braking, Proceedings of the Symposium on Control of Vehicles in Cornering and Braking.” The Institute of Mechanical Engineers June 1963
- Nordeen Donald L. “Vehicle Handling: Its Dependence Upon Vehicle Parameters.” Paper S405 SAE Section Meeting February 1964
- Segel L. “On the Lateral Stability and Control of the Automobile as Influenced by the Dynamics of the Steering System.” J. of Engineering for Industry (Trans. of the ASME) 88 3 August 1966
- Mitschke M. “Non-Linear Spring and Shock Absorber Characteristics in the Motor Vehicle.” ATZ 71 1969 14 21
- Beauvais F. N. Garelis C. Iacovini D. H. “An Improved Analog for Vehicle Stability Analysis.” Paper 295C SAE Automotive Engineering Congress Detroit January 1961
- Bergman Walter Fox E. A. Saibel E. “Dynamics of An Automobile in a Cornering Maneuver On and Off the Highway.” First International Conference on the Mechanics of Soil-Vehicle Systems Torino, Italy June 1961
- Bergman Walter “The Basic Nature of Vehicle Understeer-Oversteer.” Paper 650085 SAE Automotive Engineering Congress Detroit January 1965
- Chiesa A. Rinonopoli L. “Vehicle Stability Studied with a Non-Linear Seven Degree Model.” Paper 670476 SAE Mid-Year Meeting Chicago May 1967
- Hamann Wayne C. “Analytical Prediction of Vehicle Handling Behavior.” Paper 670192 SAE Automotive Engineering Congress Detroit January 1967
- McHenry R. R. Segal D. J. DeLeys N. J. “Determination of Physical Criteria for Roadside Energy Systems.” Cornell Aeronautical Laboratory Final Report VJ-2251-V-1 Bureau of Public Roads July 1967
- Neilson I. D. “The Motion and Stability of a Vehicle Moving Over Surfaces Which are Bumpy, Sloping, or Cambered.” Symposium on Vehicle and Road Design for Safety Institute of Mechanical Engineers Advanced School of Automobile Engineering Cranfield, England July 1968
- McHenry R. R. DeLeys N. J. “Vehicle Dynamics in Single Vehicle Accident, Validation and Extensions of a Computer Simulation.” Cornell Aeronautical Laboratory Interim Report No. V5-2251-V-3 Bureau of Public Roads December 1968
- McHenry R. R. “An Analysis of the Dynamics of Automobiles During Simultaneous Cornering and Ride Motions.” Institute of Mechanical Engineering Symposium on Handling of Vehicles under Emergency Conditions Univ. of Technology Loughborough, England January 1969
- Maeda Teruo Uemura Hitoshi “On Development of Vehicle Dynamics by Means of a Digital Computer.” Paper 690233 SAE Automotive Engineering Congress Detroit January 1969
- Leffert Ronald L. “Programming Time-Sharing Digital Computers for Linear Dynamic Simulation.” Paper 690235 SAE Automotive Engineering Congress Detroit January 1969
- Komoda Nurio Kohno T. Tsuchiya S. “On the Vehicle Dynamic Response to Steering Control-Experimental Evaluation of the Response and Analytical Approach to the Design of the Performance with Seven Degrees Model.” Paper 690488 SAE Mid-Year Meeting Chicago May 1969
- Shigley J. E. “Simulation of Mechanical Systems: An Introduction.” New York McGraw-Hill 1967
- Johnson C. L. “Analog Computer Techniques.” New York McGraw-Hill 2nd 1963
- James M. L. Smith G. M. Wolford J. C. “Analog and Digital Computer Methods in Engineering Analysis.” Scranton, Pa. International Textbook Co. 1964
- Brennan R. D. Linebarger R. N. “A Survey of Digital Simulation: Digital Analog Simulator Programs.” Simulation 3 6 December 1964 22 36
- Peterson H. E. Sansom F. J. “MIMIC--A Digital Simulator Program.” SESCA Internal Memo 65-12 Systems Engineering Group, Wright-Patterson AFB Ohio May 1965
- Syn W. M. Wyman D. C. Linebarger R. N. “DSL/90 Digital Simulation Language (7090/94 Program).” Systems Development Division, IBM Corp. San Jose, Calif. June 1965
- “DES-1 Differential Equation Solver Reference Manual.” Scientific Data Systems October 1965
- “Systems/360 Continuous System Modeling Program (360A-CX-16C) Application Description.” IBM Document No. H20-0240-1 IBM Corp. 1967
- Harnett R. T. Sansom F. J. Warshawsky L. M. “MIDAS Programming Guide.” Tech. Doc. Report No. SEG-TDR-64-1 Systems Engineering Group, Wright-Patterson AFB Ohio January 1964
- Bekey G. A. Karplus W. J. “Hybrid Computation.” New York John Wiley and Sons, Inc. 1968
- Valentine R. G. “Hybrid Simulation of Vehicle Directional Control.” Midwestern Simulation Council Meeting Milford, Mich. Sept. 8-9 1969
- Hafner Carole Murphy R. W. “Hybrid Computer Processing of Data from an Instrumented Vehicle.” Midwestern Simulation Council Meeting Milford, Mich. Sept. 8-9 1969
- Fisher D. K. “Optical Control of an Electrohydraulic Test Stand Using Hybrid Computation.” Paper 700153 SAE Automotive Engineering Congress Detroit January 1970
- Fancher Paul S. Dugoff H. Segel L. “Tire Performance Characteristics Affecting Vehicle Response to Steering and Braking Control Inputs.” First Report prepared for the National Bureau of Standards August 1969