This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Separation of Average Torque and Torque Ripple in PMSMs Considering Saturation, Cross-Coupling and Flux Harmonics Using Frozen Permeability Method
Technical Paper
2022-01-0730
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The separation and analysis of the torque of the permanent magnet synchronous motor is of great significance for optimizing the torque output of the motor. Based on the frozen permeability method, the virtual work principle (VWP) or the Maxwell stress tensor method (MSTM) is often used to separate the torque for torque analysis. However, considering the influence of non-ideal factors such as motor saturation, cross-coupling and flux harmonics, there are differences in torque separation between the VWP and the MSTM, which has been researched and analyzed in this paper. Based on this, for the assisted airspace barrier design of a surface-inserted permanent magnet synchronous motor, to conduct theoretical research on the torque optimization design, this paper uses the VWP to separate the average torque and the MSTM to separate the torque ripple.
Authors
Topic
Citation
Huang, Z. and Zuo, S., "Separation of Average Torque and Torque Ripple in PMSMs Considering Saturation, Cross-Coupling and Flux Harmonics Using Frozen Permeability Method," SAE Technical Paper 2022-01-0730, 2022, https://doi.org/10.4271/2022-01-0730.Also In
References
- Morimoto , S. , Sanada , M. , and Takeda , Y. Wide-Speed Operation of Interior Permanent Magnet Synchronous Motors with High-Performance Current Regulator IEEE Transactions on Industry Applications 30 4 1994 920 926 10.1109/28.297908
- Hu , H. , Zhao , J. , Liu , X. , Chen , Z. et al. Research on the Torque Ripple and Scanning Range of an Arc-Structure PMSM Used for Scanning System IEEE Transactions on Magnetics 50 11 Nov. 2014 1 4 10.1109/TMAG.2014.2329094
- Parsa , L. and Hao , L. Interior Permanent Magnet Motors With Reduced Torque Pulsation IEEE Transactions on Industrial Electronics 55 2 2008 602 609 10.1109/TIE.2007.911953
- Hsu , L.-Y. and Tsai , M.-C. Tooth Shape Optimization of Brushless Permanent Magnet Motors for Reducing Torque Ripples Journal of Magnetism and Magnetic Materials 282 Nov. 2004 193 197 10.1016/j.jmmm.2004.04.044
- Chu , W.Q. and Zhu , Z.Q. Reduction of On-Load Torque Ripples in Permanent Magnet Synchronous Machines by Improved Skewing IEEE Transactions on Magnetics 49 7 Jul. 2013 3822 3825 10.1109/TMAG.2013.2247381
- Güemes , J.A. , Iraolagoitia , A.M. , del Hoyo , J.I. , and Fernández , P. Torque Analysis in Permanent-Magnet Synchronous Motors: A Comparative Study IEEE Transactions on Energy Conversion 26 1 55 63 Mar. 2011 10.1109/TEC.2010.2053374
- Wang , K. , Zhu , Z.Q. , Ombach , G. , and Chlebosz , W. Average Torque Improvement of Interior Permanent-Magnet Machine Using Third Harmonic in Rotor Shape IEEE Transactions on Industrial Electronics 61 9 Sep. 2014 5047 5057 10.1109/TIE.2013.2286085
- Ren , W. , Xu , Q. , and Li , Q. Asymmetrical V-Shape Rotor Configuration of an Interior Permanent Magnet Machine for Improving Torque Characteristics IEEE Transactions on Magnetics 51 11 Nov. 2015 1 4 10.1109/TMAG.2015.2450931
- Sizov , G.Y. , Ionel , D.M. , and Demerdash , N.A.O. Modeling and Parametric Design of Permanent-Magnet AC Machines Using Computationally Efficient Finite-Element Analysis IEEE Transactions on Industrial Electronics 59 6 Jun. 2012 2403 2413 10.1109/TIE.2011.2163912
- Salon , S. , Bhatia , S. , and Burow , D. Some Aspects of Torque Calculations in Electrical Machines IEEE Transactions on Magnetics 33 2 Mar. 1997 2018 2021 10.1109/20.582702
- Bianchi , N. and Alberti , L. MMF Harmonics Effect on the Embedded FE Analytical Computation of PM Motors IEEE Transactions on Industry Applications 46 2 2010 812 820 10.1109/TIA.2010.2041098
- Nakao , N. and Akatsu , K. Torque Ripple Suppression of Permanent Magnet Synchronous Motors Considering Total Loss Reduction 2013 IEEE Energy Conversion Congress and Exposition Sep. 2013 3880 3887 10.1109/ECCE.2013.6647215
- Yi , P. , Sun , Z. , and Wang , X. Research on PMSM Harmonic Coupling Models Based on Magnetic Co-Energy IET Electric Power Applications 13 4 Apr. 2019 571 579 10.1049/iet-epa.2018.5196
- Chu , W.Q. and Zhu , Z.Q. Average Torque Separation in Permanent Magnet Synchronous Machines Using Frozen Permeability IEEE Transactions on Magnetics 49 3 Mar. 2013 1202 1210 10.1109/TMAG.2012.2225068
- Qi , G. , Chen , J.T. , Zhu , Z.Q. , Howe , D. et al. Influence of Skew and Cross-Coupling on Flux-Weakening Performance of Permanent-Magnet Brushless AC Machines IEEE Transactions on Magnetics 45 5 May 2009 2110 2117 10.1109/TMAG.2009.2013244
- Lee , S. , Jeong , Y.-S. , Kim , Y.-J. , and Jung , S.-Y. Novel Analysis and Design Methodology of Interior Permanent-Magnet Synchronous Motor Using Newly Adopted Synthetic Flux Linkage IEEE Transactions on Industrial Electronics 58 9 Sep. 2011 3806 3814 10.1109/TIE.2010.2093479
- Azar , Z. , Zhu , Z.Q. , and Ombach , G. Influence of Electric Loading and Magnetic Saturation on Cogging Torque, Back-EMF and Torque Ripple of PM Machines IEEE Transactions on Magnetics 48 10 Oct. 2012 2650 2658 10.1109/TMAG.2012.2201493
- Chu , W.Q. and Zhu , Z.Q. On-Load Cogging Torque Calculation in Permanent Magnet Machines IEEE Transactions on Magnetics 49 6 Jun. 2013 2982 2989 10.1109/TMAG.2012.2236348
- Yamazaki , K. and Kumagai , M. Torque Analysis of Interior Permanent-Magnet Synchronous Motors by Considering Cross-Magnetization: Variation in Torque Components With Permanent-Magnet Configurations IEEE Transactions on Industrial Electronics 61 7 Jul. 2014 3192 3201 10.1109/TIE.2013.2278508
- Xu , G. , Liu , G. , Zhao , W. , Chen , Q. et al. Principle of Torque-Angle Approaching in a Hybrid Rotor Permanent-Magnet Motor IEEE Transactions on Industrial Electronics 66 4 Apr. 2019 2580 2591 10.1109/TIE.2018.2844797
- Tangudu , J.K. , Jahns , T.M. , El-Refaie , A.M. , and Zhu , Z.Q. Segregation of Torque Components in Fractional-Slot Concentrated-Winding Interior PM Machines Using Frozen Permeability 2009 IEEE Energy Conversion Congress and Exposition Sep. 2009 3814 3821 10.1109/ECCE.2009.5316039
- Wenliang , Z. , Lipo , T.A. , and Kwon , B.-I. Optimal Design of a Novel Asymmetrical Rotor Structure to Obtain Torque and Efficiency Improvement in Surface Inset PM Motors IEEE Transactions on Magnetics 51 3 Mar. 2015 1 4 10.1109/TMAG.2014.2362146
- Zhao , W. , Zhao , F. , Lipo , T.A. , and Kwon , B.-I. Optimal Design of a Novel V-Type Interior Permanent Magnet Motor with Assisted Barriers for the Improvement of Torque Characteristics IEEE Transactions on Magnetics 50 11 Nov. 2014 1 4 10.1109/TMAG.2014.2330339
- Ibrahim , M. and Pillay , P. Aligning the Reluctance and Magnet Torque in Permanent Magnet Synchronous Motors for Improved Performance 2018 IEEE Energy Conversion Congress and Exposition (ECCE) Sep. 2018 2286 2291 10.1109/ECCE.2018.8558276
- Kim , K.-C. and Jeon , S.-H. Analysis on Correlation Between Cogging Torque and Torque Ripple by Considering Magnetic Saturation IEEE Transactions on Magnetics 49 5 May 2013 2417 2420 10.1109/TMAG.2013.2240443
- Patel , V.I. , Wang , J. , Lazari , P. , Chen , L. , et al. Reluctance Torque Evaluation for Interior Permanent Magnet Machines Using Frozen Permeability 7th IET International Conference on Power Electronics, Machines and Drives (PEMD 2014) 2014 2.1.03 10.1049/cp.2014.0300
- Kwak , S.-Y. , Kim , J.-K. , and Jung , H.-K. Characteristic Analysis of Multilayer-Buried Magnet Synchronous Motor Using Fixed Permeability Method IEEE Transactions on Energy Conversion 20 3 Sep. 2005 549 555 10.1109/TEC.2005.847973
- Yamazaki , K. and Kondo , R. Reduction of Cross Magnetization in Interior Permanent Magnet Synchronous Motors with V-Shape Magnet Configurations by Optimizing Rotor Slits 2019 IEEE Energy Conversion Congress and Exposition (ECCE) Sep. 2019 4873 4879 10.1109/ECCE.2019.8911875
- Ge , X. , Zhu , Z.Q. , Li , J. , and Chen , J. A Spoke-Type IPM Machine With Novel Alternate Airspace Barriers and Reduction of Unipolar Leakage Flux by Step-Staggered Rotor IEEE Transactions on Industry Applications 52 6 Nov. 2016 4789 4797 10.1109/TIA.2016.2600649
- Li , S. , Han , D. , and Sarlioglu , B. Modeling of Interior Permanent Magnet Machine Considering Saturation, Cross Coupling, Spatial Harmonics, and Temperature Effects IEEE Transactions on Transportation Electrification 3 3 Sep. 2017 682 693 10.1109/TTE.2017.2679212
- Feng , G. , Lai , C. , and Kar , N.C. A Closed-Loop Fuzzy-Logic-Based Current Controller for PMSM Torque Ripple Minimization Using the Magnitude of Speed Harmonic as the Feedback Control Signal IEEE Transactions on Industrial Electronics 64 4 Apr. 2017 2642 2653 10.1109/TIE.2016.2631524
- Yi , P. , Wang , X. , and Sun , Z. Interior Permanent Magnet Synchronous Motor Minimum Current Harmonics Torque Ripple Suppression Strategy Based on Magnetic Co-Energy Model IET Electric Power Applications 14 2 Feb. 2020 234 244 10.1049/iet-epa.2019.0276
- Lai , C. , Feng , G. , Mukherjee , K. , Loukanov , V. et al. Torque Ripple Modeling and Minimization for Interior PMSM Considering Magnetic Saturation IEEE Transactions on Power Electronics 33 3 Mar. 2018 2417 2429 10.1109/TPEL.2017.2695440
- Wu , Z. , Zuo , S. , and Chen , S. Analytical Modeling and Calculation of Electromagnetic Torque of Interior Permanent Magnet Synchronous Motor Considering Ripple Characteristics SAE Int. J. Adv. & Curr. Prac. in Mobility 3 4 2088 2099 2021 https://doi.org/10.4271/2021-01-0769