This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Ultra-Low NOx Emission Prediction for Heavy Duty Diesel Applications Using a Map-Based Approach
Technical Paper
2019-01-0987
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
As vehicle emissions regulations become increasingly stringent, there is a growing need to accurately model aftertreatment systems to aid in the development of ultra-low NOx vehicles. Common solutions to this problem include the development of complex chemical models or expansive neural networks. This paper aims to present the development process of a simpler Selective Catalytic Reduction (SCR) conversion efficiency Simulink model for the purposes of modeling tail pipe NOx emission levels based on various inputs, temperature shifts and SCR locations, arrangements and/or sizes in the system. The main objective is to utilize this model to predict tail pipe NOx emissions of the EPA Federal Test Procedures for heavy-duty vehicles. The model presented within is focused exclusively on heavy-duty application compression ignition engines and their corresponding aftertreatment setups. The accuracy of the model depends heavily on the ability to gain precise and repeatable test cell data to calculate an expansive SCR conversion efficiency map for the given aftertreatment system. This conversion efficiency map is verifiable based on expected/known chemical and physical properties of SCR aftertreatment systems. For this application, a 2-dimensional map was created, using SCR temperature and space velocity. The model requires several inputs including engine out NOx concentrations, SCR temperature, and exhaust flow/space velocity to input into the table and thus predict the corresponding tail pipe NOx. While different engine calibrations can impact the accuracy of the model, it was found that error in average tail pipe NOx prediction (g/bhp·hr) was approximately +/- 10%. For the purposes of this model, this error was found to be sufficient in providing the proper direction for ultra-low NOx aftertreatment development.
Recommended Content
Authors
Topic
Citation
Singh, N., Adelman, B., Malagari, S., and Hickey, K., "Ultra-Low NOx Emission Prediction for Heavy Duty Diesel Applications Using a Map-Based Approach," SAE Technical Paper 2019-01-0987, 2019, https://doi.org/10.4271/2019-01-0987.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 |
Also In
References
- Eastwood , P. Critical Topics in Exhaust Gas Aftertreatment Baldock, Hertfordshire Research Studies Press 2001
- EPA Emission Standards for Heavy-Duty Highway Engines and Vehicles 2018 https://www.epa.gov/emission-standards-reference-guide/epa-emission-standards-heavy-duty-highway-engines-and-vehicles
- Ettireddy , P. , Kotrba , A. , Boningari , T. , and Smirniotis , P. Low Temperature SCR Catalysts Optimized for Cold-Start and Low-Load Engine Exhaust Conditions SAE Technical Paper 2015-01-1026 2015 10.4271/2015-01-1026
- Fischer , M. Transient NOx Estimation Using Artificial Neural Networks The International Federation of Automatic Control September 4, 2013 101 06
- Ericson , C. , Westerberg , B. , and Egnell , R. Transient Emission Predictions with Quasi Stationary Models SAE Technical Paper 2005-01-3852 2005 10.4271/2005-01-3852
- Singh , N. , Venkatesh , P. , Nigro , E. , and Lack , A. Development of the NOx Emission Model for the Heavy Duty Diesel Engine Application Using Combustion Characteristic Parameters SAE Technical Paper 2013-01-0532 2013 10.4271/2013-01-0532
- Ericson , C. , Westerberg , B. , Andersson , M. , and Egnell , R. Modelling Diesel Engine Combustion and NOx Formation for Model Based Control and Simulation of Engine and Exhaust Aftertreatment Systems SAE Technical Paper 2006-01-0687 2006 10.4271/2006-01-0687
- Chatterjee , D. , Koci , P. , Schmeisser , V. , Marek , M. et al. Modelling of NOx Storage + SCR Exhaust Gas Aftertreatment System with Internal Generation of Ammonia SAE Int. J. Fuels Lubr. 3 1 500 522 2010 10.4271/2010-01-0887
- Dahodwala , M. , Joshi , S. , Koehler , E.W. , Franke , M. et al. Strategies for Meeting Phase 2 GHG and Ultra-Low NOx Emission Standards for Heavy-Duty Diesel Engines SAE Technical Paper 2018-01-1429 2018 10.4271/2018-01-1429
- Sharp , C. , Webb , C. , Yoon , S. , Carter , M. et al. Achieving Ultra Low NOX Emissions Levels with a 2017 Heavy-Duty On Highway TC Diesel Engine - Comparison of Advanced Technology Approaches SAE Int. J. Engines 10 4 1722 1735 2017 10.4271/2017-01-0956