This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Damage-Based Finite Element Simulation of Void Nucleation in Al-Mg Alloy Sheet
Technical Paper
2007-01-0423
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Damage-based finite element simulations of notched tensile specimens of Al-Mg alloy AA5182 sheet were performed to select an appropriate void nucleation model and its parameters. Upper and lower bound damage-based constitutive models are used as the actual material behavior and nucleation parameter lies within these limits. Simple and complex nucleation models are compared to the experimental results and an appropriate model suggested. The lower-bound yield criterion of Sun and Wang [1] with a modified stress-controlled nucleation rule was found to give strong agreement with the experimental observations.
Recommended Content
Authors
Citation
Butcher, C., Zhang, Y., and Chen, Z., "Damage-Based Finite Element Simulation of Void Nucleation in Al-Mg Alloy Sheet," SAE Technical Paper 2007-01-0423, 2007, https://doi.org/10.4271/2007-01-0423.Also In
Advances in Lightweight Materials: Casting and Aluminum and Achieving Lightweight Vehicles
Number: SP-2105; Published: 2007-04-16
Number: SP-2105; Published: 2007-04-16
References
- Sun Y. Wang D. 1989 A lower bound approach to the yield loci of porous materials Acta Mechanica Sinica 5 237 243
- Sun D.Z. Sigele D. Voss B. Schmitt W. 1989 Application of local damage models to the numerical analysis of ductile rupture Fatigue and Fracture of Engineering Materials and Structures 12 201 212
- Koplik J. Needleman A. 1988 Void growth and coalescence in porous plastic solids International Journal of Solids and Structures 24 835 853
- Zhang Z. 1996 A sensitivity analysis of material parameters for the Gurson constitutive model Fatigue and Fracture of Engineering Materials and Structures 19 561 570
- Zhang Z.L. Thaulow C. Odegard J. 2000 A complete Gurson model approach for ductile fracture Engineering Fracture Mechanics 67 155 168
- Gurson A.L. 1977 Continuum theory of ductile rupture by void nucleation and growth – Part I. Yield criteria and flow rules for porous ductile media Journal of Engineering Materials and Technology 99 2 15
- Tvergaard V. 1981 Influence of voids on shear band instabilities under plane strain conditions International Journal of Fracture 17 389 407
- Tvergaard V. Needleman A. 1984 Analysis of the cup-cone fracture in a round tensile test bar Acta Metallurgica 32 157 169
- Pardoen T. Hutchinson J.W. 2000 An extended model for void growth and coalescence Journal of the Mechanics and Physics of Solids 48 2567 2512
- Wen J. Huang Y. Hwang K.C. Liu C. Li M. 2005 The modified Gurson model accounting for the void size effect International Journal of Plasticity 21 381 395
- Leblond J.B. Perrin G. Devaux J. 1994 Bifurcation effects in ductile metals with damage delocalization Journal of Applied Mechanics 61 236 242
- Reusch F. Svendsen B. Klingbeil D. 2003 Local and non-local Gurson-based ductile damage and failure modeling at large deformation European Journal of Mechanics and Solids 22 779 792
- Liao K.C. Pan J. Tang S.C. 1997 Approximate yield criteria for anisotropic porous ductile sheet metals Mechanics of Materials 26 213 226
- Chein W.Y. Pan J. Tang S.C. 2001 Modified anisotropic Gurson yield criterion for porous ductile sheet metals Journal of Engineering Materials and Technology 132 409 416
- Wang D.A. Pan J. Liu S.D. 2004 An anisotropic yield criterion for porous ductile sheet metals with planar anisotropy International Journal of Damage Mechanics 13 7 33
- Yan X.Q. 1992 Effect of yield surface curvature on local necking in biaxially stretched sheets in porous materials Journal of Engineering Materials and Technology 114 196 200
- Sun Y. Wang D. 1995 Analysis of shear localization in porous materials based on a lower bound approach International Journal of Fracture 71 71 83
- Sun Y. 1995a Influence of void nucleation and growth on deformation localization in tensile sheet specimen Engineering Fracture Mechanics 51 381 395
- Sun Y. 1995b Constitutive equations for ductile materials containing large and small voids Mechanics of Materials 19 119 127
- Shima S. Oyane M. 1976 Plasticity theory for porous metals International Journal of Mechanical Science 18 285 291
- Richmond O. Smelser R.E. 1985 Alcoa Technical Center Memorandum
- Francescato P. Pastor J Riveill-Reydet B. 2004 Ductile failure of cylindrically porous materials. Part I – Plane stress problem and experimental results European Journal of Mechanics and Solids 23 181 190
- Thomason P.F. 1990 Ductile fracture of metals. Pergamon Press Inc. Oxford
- Zhang Z.L. 1998 A complete Gurson model Nonlinear fracture and damage mechanics, Computational Mechanics Publications.
- Zhang Z.L. Niemi E. 1994a Studies on the ductility predictions by different local failure criteria Engineering Fracture Mechanics 48 529 540
- Chen Y. Lambert S. 2003 Analysis of ductile tearing of pipeline-steel in single edge notch tension specimens International Journal of Fracture, 124 179 199
- Chen Z.T. 2004 The role of heterogeneous particle distribution in the prediction of ductile fracture. Ph.D. Thesis, University of Waterloo, Canada
- Brunet M. Morestin F. Walter-Leberre H. 2005 Failure analysis of anisotropic sheet-metals using non-local plastic damage model Journal of Materials Processing Technology 170 457 470
- Chu C.C. Needleman A. 1980 Void nucleation effects in biaxially stretched sheets Journal of Engineering Material and Technology 102 249 256
- Needleman A. 1987 Continuum model for void nucleation by inclusion debonding Journal of Applied Mechanics 54 525 531
- Shabrov M.N. Needleman A. 2002 An analysis of inclusion morphology effects on void nucleation Modelling and Simulation in Materials Science and Engineering 10 163 183
- Faleskog J. Gao X Shih C.F. 1998 Cell model for nonlinear fracture analysis – Micromechanics calibration International Journal of Fracture 89 355 373
- Chen Z.T. Worswick M.J. Pilkey A.K. Lloyd D.J. 2005 Damage percolation during stretch flange forming of aluminum sheet Journal of the Mechanics and Physics of Solids 53 2692 2717
- Lievers W.B. Pilkey A.K. Lloyd D.J. 2004 Using incremental forming to calibrate a void nucleation model for automotive aluminum sheet alloys Acta Materialia 52 3001 3007
- Saje M. Pan J. Needleman A. 1982 Void nucleation effects on shear localization in porous plastic solids International Journal of Fracture 19 163 182
- Tszeng T.C. 2000 Interfacial stresses and void nucleation in discontinuously reinforced composites Journal of Engineering Materials and Technology 122 86 92
- Worswick M.J. Pelletier P. 1998 Numerical simulation of ductile fracture during high strain rate deformation European Physical Journal Applied Physics 4 257 267
- Smerd R. Winkler S. Salisbury C. Worswick M. Lloyd D. Finn M. 2005 High strain rate tensile testing of automotive aluminum alloy sheet International Journal of Impact Engineering 32 541 560
- Zhang Z.L. Niemi E. 1994b Analyzing ductile fracture using dual dilational constitutive equations Fatigue and Fracture of Engineering Materials and Structures 17 695 707
- Fisher J. Gurland J. 1981 Void nucleation in spheroidized carbon steels – Part 1: Experimental Metal Science 15 185 192