This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Urea-SCR-Technology - Performance of Structured Metallic Substrates
Technical Paper
2006-01-3505
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
SCR technology has proven its ability to significantly reduce NOX emissions to fulfill future emission legislations. The key to this technology is the generation of ammonia on-board to reduce the NOX. Ammonia generation catalyst systems need to be highly efficient in a limited packaging space. The influence of physical parameters of the catalyst's substrate such as thermal mass, hydraulic diameter and geometric surface area on catalyst's efficiency is well known, but the transport processes in structured metallic substrates are still an object of investigation.
A numerical study for 3 structured substrates was carried out, and the results were compared with experimental data. An increase of the volumetric efficiency was found when structured substrates were applied. The numerical results are in good accordance with the experimental data and therefore proven to be an excellent tool for channel design optimization.
Recommended Content
Authors
Topic
Citation
Steinbach, S., Grünwald, J., and Sattelmayer, T., "Urea-SCR-Technology - Performance of Structured Metallic Substrates," SAE Technical Paper 2006-01-3505, 2006, https://doi.org/10.4271/2006-01-3505.Also In
References
- Jacob, Eberhard Müller, Raimund Scheeder, Andreas Thomas Cartus Dreisbach, Rolf Mai, Hans-Peter Paulus, Martin Spengler, Jörg “High Performance SCR Catalyst System: Elements to Guarantee the Lowest Emission of NOx” 12 622 2006
- Kleemann, M. Elsener, M. Koebel, M. Wokaun, A. “Hydrolysis of Isocyanic Acid on SCR Catalysts” Ind. Eng. Chem. Res 39 4120 4126 2000
- Jacob, Eberhard Döring, Andreas “Vom SCR-Katalysator zum gesteuerten Dieselkatalysator (GD-KAT)” 163 171 Frankfurt 2003
- Bollig, M Liebl, J. Zimmer, R. Kraum, M. Seel, O. Siemund, S. Brück, R. Diringer, J. Maus, W. “Next generation catalysts are turbulent: development of support and coating” SAE 2004-01-1488 2004
- Incropera, Frank P. DeWitt, David P. Fundamentals of Heat and Mass Transfer 4th John Wiley & Sons New York 1996
- Baehr, H. D. Stephan, K Wärme- und Stoffübertragung 4th Springer-Verlag Berlin 2004
- Presti, Manuel Pace, Lorenzo Hodgson, Jan Bella, Gino Maio, Alessandro De “A Computational and Experimental Analysis for Optimization of Cell Shape in High Performance Catalytic Converters” SAE 2002-01-0355 2002
- Maus, Wolfgang Brück, Rolf “The Future of Heterogeneous Catalysis in Automotive Applications; “Turbulent” Catalysts for Spark- and Compression Ignition Engines” 12 595 297 319 2005
- Larrubia, Angeles M. Gianguido Ramis Busca, Guido “An FT-IR study of the absorption and oxidation of N-containing compounds over Fe 2 O 3 -TiO 2 SCR catalysts” Applied Catalysis B: Environmental 30 101 110 2001
- Kurt, Helmut VDI-Wärmeatlas 7th Springer Verlag Berlin 1994
- Perry, Robert H Green, Don W. PERRY'S CHEMICAL ENGINEERS' HANDBOOK 7th McGraw-Hill 1997
- FLUENT manual “8.8 Mass Diffusion Coefficients” Fluent inc. 2005
- Steinbach, Sebastian Grünwald, Jürgen Glückert, Udo Sattelmayer, Thomas “Characterisation of structured hydrolysis catalysts for urea-SCR” Brussels 30 08 2006 01 09 2006