This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
CAE Considerations in the Modeling of Welded Joints
Technical Paper
2005-01-0512
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Welding is one of the most commonly used fabrication method in various automotive applications. Welding is a metallurgical fusion process in which parts or work pieces to be joined are heated above their melting temperature and then solidified. Some of the effects of the welding include residual stresses and Heat Affected Zone (HAZ). A methodology is proposed to study the welding process using the commercial finite element software, ABAQUS. Non linear transient heat transfer analysis is used. Effects of heat energy input rate and heat input time on residual stresses and HAZ are determined.
Recommended Content
Authors
Citation
Fan, X., Cao, K., Gummadi, L., Chen, B. et al., "CAE Considerations in the Modeling of Welded Joints," SAE Technical Paper 2005-01-0512, 2005, https://doi.org/10.4271/2005-01-0512.Also In
References
- Argyris J.H. Szimmat J. Willam K.J. “Computational Aspects of Welding Stress Analysis” Computer Methods in Applied Mechanics and Engineering 33 635 666 1982
- Rybicki E. F. Schmuser D. W. Stonesifer R.B. Groom J.J. Mishler H.W. “A Finite Element Model For Residual Stresses and Deflections in Girth- Butt welded Pipes” Journal of Pressure Vessel Technology 100 256 262 1978
- Papazogolu V.J. Masubuchi K. “Numerical Analysis of Thermal Stresses incluing Phase Transformation Effects” Journal of Pressure Vessel technology 104 198 203 1982
- Oddy A.S. Goldak J.A. McDill J.M.J. “Numerical Analysis of Transformation Plasticity in 3D Finite Element Analysis of Welds” European Journal of Mechanics 9 253 263 1990
- Tekriwal P. Muzumdar J. “Finite Element Analysis of GMAW” Journal of Engineering Materials and Technology” 113 336 343 1991
- Deo M.V. Michaleris P. Sun J. “Prediction of Buckling Distortion of Welded Structures” Science and Technology of Welding and Joining 2002
- Weaver, M.A. “Determination of Weld Loads and Throat Requirements using Finite Element Analysis with Shell Element Models- A Comparison with Classical Analysis” Welding Research Supplement 1 11 1999
- Wei P.S. Ho C.Y. “Axisymmetric nugget growth during resistance spot welding” ASME Journal of Heat Transfer 112 309 316 1990
- Li Y. Wang J. Chen M. Shen X. “Finite Element Analysis of Residual Stress in the Welded Zone of a High Strength Steel” Bullet Material Science 27 127 132 2004
- ABAQUS Analysis User's manual ABAQUS, Inc. 2003