Genome sequence of the lupin-nodulating Bradyrhizobium sp. strain WSM1417

Bradyrhizobium sp. strain WSM1417 is an aerobic, motile, Gram-negative, non-spore-forming rod that was isolated from an effective nitrogen (N2) fixing root nodule of Lupinus sp. collected in Papudo, Chile, in 1995. However, this microsymbiont is a poorly effective N2 fixer with the legume host Lupinus angustifolius L.; a lupin species of considerable economic importance in both Chile and Australia. The symbiosis formed with L. angustifolius produces less than half of the dry matter achieved by the symbioses with commercial inoculant strains such as Bradyrhizobium sp. strain WSM471. Therefore, WSM1417 is an important candidate strain with which to investigate the genetics of effective N2 fixation in the lupin-bradyrhizobia symbioses. Here we describe the features of Bradyrhizobium sp. strain WSM1417, together with genome sequence information and annotation. The 8,048,963 bp high-quality-draft genome is arranged in a single scaffold of 2 contigs, contains 7,695 protein-coding genes and 77 RNA-only encoding genes, and is one of 20 rhizobial genomes sequenced as part of the DOE Joint Genome Institute 2010 Community Sequencing Program.


Introduction
The Fabaceae plant family is the third largest family of flowering plants with a unique ecological role in nitrogen (N2) fixation. This family encompasses the three subfamilies Caesalpinioideae, Mimosoideae, and Faboideae (or Papilionoideae). The legume genus Lupinus (commonly known as lupin) consists of around 280 species classified within the Genisteae tribe of the subfamily Faboideae with major centers of diversity in South and Western North America, the Andes, the Mediterranean regions, and Africa. This legume has been grown in rotations with cereals for at least 2000 years [1] and is widely distributed within the old and new worlds [2]. The grain may be easily harvested and contains the full range of essential amino acids, and because of its high concen-tration of sulfur containing amino acids has high feed value for stock [2]. The lupin root nodule bacteria have all been classified within the genus Bradyrhizobium [3,4] with the exception of Microvirga lupini that was found to nodulate with Lupinus texensis [5]. Bradyrhizobium spp. are commonly associated with the nodulation of sub-tropical and tropical legumes such as soybean [6,7]. In contrast, lupins are the only agricultural grain legume nodulated by this genus in Mediterranean-type climatic zones. Strains of lupin-nodulating Bradyrhizobium are also able to nodulate the herbaceous Mediterranean legume Ornithopus (seradella) spp. In this context, lupin Bradyrhizobium strains are rare microsymbionts of herbaceous and crop legumes endemic to the cool climatic regions of the world. The cultivation of lupin in these regions provides a cash crop alternative to soy. Lupinus angustifolius in particular has been extensively used to extend grain production into poor quality soils without fertilizer supplementation since fixed nitrogen can be obtained from the symbiosis with Bradyrhizobium [8]. Considerable variation exists in the amount of N2 fixed in the lupin-Bradyrhizobium association [8]. This is significant in agricultural ecosystems, as the benefits derived from growing lupins accrue both to the grain produced and the N2 fixed [9]. A well-grown lupin crop may fix up to 300 kg of N per ha. It is therefore important to understand the genetic constraints to optimal N2 fixation in this symbiosis. Bradyrhizobium sp. strain WSM1417 represents the lower end of the scale in strain N2 fixation capacity on L. angustifolius, and hence its genome sequence presents an opportunity to understand the genetic elements responsible for this trait.
Here we present a summary classification and a set of general features for Bradyrhizobium sp. WSM1417 together with the description of the complete genome sequence and its annotation.

Classification and general features
Bradyrhizobium sp. WSM1417 is a motile, Gramnegative, non-spore-forming rod ( Figure 1 Left and Center) in the order Rhizobiales of the class Alphaproteobacteria. It is slow growing in laboratory culture, forming 1-2mm colonies within 7-10 days when grown on half Lupin Agar (½LA) [10] at 28°C. Colonies on ½LA are white-opaque, slightly domed, moderately mucoid with smooth margins ( Figure 1C). Minimum Information about the Genome Sequence (MIGS) is provided in Table  1. Figure 2 shows the phylogenetic neighborhood of Bradyrhizobium sp. strain WSM1417 in a 16S rRNA sequence based tree. This strain clusters closest to Bradyrhizobium canariense LMG 22265 T and Bradyrhizobium japonicum LMG 6138 T with 99.85% and 99.48% sequence identity, respectively.

Symbiotaxonomy
Bradyrhizobium sp. WSM1417 is poorly effective on L. angustifolius, producing only 45% of the dry matter compared to that achieved by the commercial inoculant strain Bradyrhizobium sp. WSM471 on this species. In contrast on L. mutabilis, WSM1417 performs much better, yielding 83% of the dry matter produced by WSM471 on this same host.

Genome sequencing and annotation information Genome project history
This organism was selected for sequencing on the basis of its environmental and agricultural relevance to issues in global carbon cycling, alternative energy production, and biogeochemical importance, and is part of the Community Sequencing Program at the U.S. Department of Energy, Joint Genome Institute (JGI) for projects of relevance to agency missions. The genome project is deposited in the Genomes OnLine Database [22] and an improved-high-quality-draft genome sequence in IMG. Sequencing, finishing and annotation were performed by the JGI. A summary of the project information is shown in Table 2.   [11,12].

MIGS ID Property Term Evidence code
Current classification Domain Bacteria TAS [12] Phylum Proteobacteria TAS [13] Class Alphaproteobacteria TAS [4,14] Order Rhizob iales TAS [14,15] Family Bradyrhizob iaceae TAS [14,16] Genus Bradyrhiz obium TAS [17] Species , not directly observed for the living , isolated sample, but based on a g enerally accepted property for the species, or anecdotal evidence). These evidence codes are from the Gene Ontolog y project [19]. Phylog enetic analyses were performed using MEGA, version 5.05 [20]. The tree was built using the maximum likelihood method with the General Time Reversible model. Bootstrap analysis [21] with 500 replicates was performed to assess the support of t he clusters. Type strains are indicated with a superscript T. Strains with a g enome sequencing project registered in GOLD [22] are in bold print and the GOLD ID is mentioned after the accession number. Published genomes are desig nated with an asterisk.

Genome sequencing and assembly
The genome of Bradyrhizobium sp. strain WSM1417 was sequenced at the Joint Genome Institute (JGI) using a combination of Illumina [25] and 454 technologies [26]. An Illumina GAii shotgun library which generated 82,690,654 reads totaling 6,284.5 Mb, and a paired end 454 library with an average insert size of 10 kb which generated 770,255 reads totaling 144.4 Mb of 454 data were generated for this genome. All general aspects of library construction and sequencing performed at the JGI can be found at the JGI website [24]. The initial draft assembly contained 2 contigs in 1 scaffold. The 454 paired end data was assembled with Newbler, version 2.3. The Newbler consensus sequences were computationally shredded into 2 kb overlapping fake reads (shreds). Illumina sequencing data were assembled with Velvet, version 1.0.13 [27], and the consensus sequences were computationally shredded into 1.5 kb overlapping fake reads (shreds). We integrated the 454 Newbler consensus shreds, the Illumina Velvet consensus shreds and the read pairs in the 454 paired end library using parallel phrap, version SPS -4.24 (High Performance Software, LLC). The software Consed (Ewing and Green 1998; Ewing et al. 1998; Gordon et al. 1998) was used in the following finishing process. Illumina data was used to correct potential base errors and increase consensus quality using the software Polisher developed at JGI (Alla Lapidus, unpublished). Possible mis-assemblies were corrected using gapResolution (Cliff Han, unpublished), Dupfinisher (Han, 2006), or sequencing cloned bridging PCR fragments with subcloning. Gaps between contigs were closed by editing in Consed, by PCR and by Bubble PCR (J-F Cheng, unpublished) primer walks. A total of 126 additional reactions were necessary to close gaps and to raise the quality of the finished sequence. The estimated genome size is 8.1 Mb and the final assembly is based on 65.8 Mb of 454 draft data, which provides an average 8.1× coverage of the genome.

Genome annotation
Genes were identified using Prodigal [28] as part of the DOE-JGI Annotation pipeline [29], followed by a round of manual curation using the JGI GenePRIMP pipeline [30]. The predicted CDSs were translated and used to search the National Center for Biotechnology Information (NCBI) nonredundant database, UniProt, TIGRFam, Pfam, PRIAM, KEGG, COG, and InterPro databases. These data sources were combined to assert a product description for each predicted protein. Noncoding genes and miscellaneous features were predicted using tRNAscan-SE [31], RNAMMer [32], Rfam [33], TMHMM [34], and SignalP [35]. Additional gene prediction analyses and functional an-notation were performed within the Integrated Microbial Genomes (IMG-ER) platform [24,36].

Genome properties
The genome is 8,048,963 nucleotides with 63.16% GC content ( Table 3) and comprised of a single scaffold of two contigs. From a total of 7,772 genes, 7,695were protein encoding and 77 RNA only encoding genes. Within the genome, 272 pseudogenes were also identified. The majority of genes (74.03%) were assigned a putative function whilst the remaining genes were annotated as hypothetical. The distribution of genes into COGs functional categories is presented in Table 4 and Figure 3.