Output-Only Identification of Vibratory Machine Suspension Parameters under Exploitational Conditions

Article Preview

Abstract:

The paper concerns model based identification of vibratory machine body suspension system on the basis of dynamic responses measured under exploitational conditions. The research was carried out by means of the restoring force, boundary perturbation and direct parameter estimation techniques which, on the contrary to classical nonlinear system identification methods, requires neither excitation measurements nor linear behaviour of the considered system around an operating point. At the first stage of the research, parameters of the machine body suspension system were identified. Results accuracy was verified by determining percentage relative error of mass estimation with respect to the value calculated based on the machine geometrical and material properties. In the next step, the suspension system was modified by introduction of a nonlinear damping system. Obtained results proved that the assumed identification method is convenient for vibratory machine suspension condition monitoring and determining forces transferred on machine foundations.

You might also be interested in these eBooks

Info:

Periodical:

Solid State Phenomena (Volume 248)

Pages:

175-185

Citation:

Online since:

March 2016

Export:

Price:

* - Corresponding Author

[1] M. Giergiel, Computer aided design of vibratory machines (in Polish), Research, dissertations, monographs 104, WIGSMiE PAN, Krakow, (2002).

Google Scholar

[2] J. Michalczyk, Vibratory machines: dynamic computations, vibrations, noise (in Polish). WNT, Warsaw, (1995).

Google Scholar

[3] T. Banaszewski, Bolters (in Polish), WŚ, Katowice, (1990).

Google Scholar

[4] G. Kerschen, K. Worden, A.F. Vakakis, J.C. Golinval, Past, present and future of nonlinear system identification in structural dynamics, Mech. Syst. and Signal Process. 20 (2006) 505–592.

DOI: 10.1016/j.ymssp.2005.04.008

Google Scholar

[5] A.H. Nayfeh, L. Pai, Linear and nonlinear structural Mechanics, Wiley Interscience, New York, (2004).

Google Scholar

[6] J.F. Schultze, F.H. Hemez, S.W. Doebling, Application of Nonlinear system updating using feature extraction and parameter effect analysis. Shock and Vib. 8 (2001) 325-337.

DOI: 10.1155/2001/581978

Google Scholar

[7] F. Al-Bender, W. Symens, J. Swevers, J. Van Brussel, Analysis of dynamic behaviour of hysteresis elements in mechanical systems, Int. J. of Nonlinear Mech. 39 (2004) 1721-1735.

DOI: 10.1016/j.ijnonlinmec.2004.04.005

Google Scholar

[8] V. Babitsky, V.L. Krupenin, Vibrations of strong nonlinear discontinuous systems. Springer, Berlin, (2001).

Google Scholar

[9] H.J. Rice, Identification of weakly non-linear systems using equivalent linearization, J. Sound and Vib. 185 (1995) 473-481.

DOI: 10.1006/jsvi.1995.0393

Google Scholar

[10] C. Soize, O. Le Fur, Modal identification of weakly non-linear system using a stochastic linearization method, Mech. Syst. and Signal Process. 11 (1997) 37-49.

DOI: 10.1006/mssp.1996.0085

Google Scholar

[11] R. Rand, A direct method for nonlinear normal modes, Int. J. Non-Linear Mech. 9 (1974) 363-368.

Google Scholar

[12] R.M. Rosenberg, The normal modes of nonlinear n-degree-of-freedom systems, J. of Appl. Mech. 29 (1962) 7-14.

Google Scholar

[13] S.W. Shaw, C. Pierre, Normal modes for non-linear vibratory systems, J. of Sound and Vib. 164 (1993) 85-124.

DOI: 10.1006/jsvi.1993.1198

Google Scholar

[14] A.F. Vakakis, Non-linear normal modes and their applications in vibration theory: an overview, Mech. Syst. and Signal Process. 11 (1997) 3-22.

Google Scholar

[15] J. Warmiński, Nonlinear Normal Modes of Parametrically and Self-Excited Systems. Recent Advances in Nonlinear Mechanics 2009, The University of Nottingham Malysia Campus, Kuala Lumpur, Malyasia, (2009).

Google Scholar

[16] J. Kevorkian, J.D. Cole, Multiple Scales and Singular Perturbation Methods. Springer, New York, (1996).

Google Scholar

[17] A.H. Nayfeh, Introduction to Perturbation Techniques, Wiley- Interscience, New York, (1981).

Google Scholar

[18] R.E. O'Maley, Singular Perturbation Methods for Ordinary Differential Equations, Springer, New York, (1991).

Google Scholar

[19] S.F. Masri, T.K. Caughey, A nonparametric identification technique for nonlinear dynamic problems, J. of Appl. Mech. 46 (1979) 433-447.

DOI: 10.1115/1.3424568

Google Scholar

[20] M.I. Qaisi, A.W. Kilani, A power-series solution for a strongly non-linear two degree-of-freedom system, J. of Sound and Vib. 233 (2000) 489-494.

DOI: 10.1006/jsvi.1999.2833

Google Scholar

[21] J. Awrejcewicz, V.A. Krysko, Nonclassical Thermoplastic Problems in Nonlinear Dynamics of Shells, Springer-Verlag, Berlin, (2003).

Google Scholar

[22] J. Awrejcewicz, I.V. Andrianov, L.I. Manevitch, Asymptotical Mechanics of Thin Walled Structures. A Handbook, Springer-Verlag, Berlin, (2004).

DOI: 10.1007/978-3-540-45246-1

Google Scholar

[23] J.M. Nichols, C.J. Nichols, M.D. Todd, M Seaver, S.T. Trickey, L.N. Virgin, Use of data-driven phase space models in assessing the strength of a bolted connection in a composite beam, Smart Mater. and Struct. 13 (2004) 241-250.

DOI: 10.1088/0964-1726/13/2/001

Google Scholar

[24] J.F. Rhoads, S.W. Shaw, K.L. Turner, R. Baskaran, Tunable MEMS filters that exploit parametric resonance, J. of Vib. and Acoust. 127 (2005) 423-430.

DOI: 10.1115/1.2013301

Google Scholar

[25] A.F. Vakakis, O. Gendelman, Energy pumping in nonlinear mechanical oscillators: Part II – resonance capture, J. of Appl. Mech. 68 (2001) 42-48.

DOI: 10.1115/1.1345525

Google Scholar

[26] P. Ibanez, Identification of dynamic parameters of linear and nonlinear structural models from experimental data, Nucl. Eng. and Des. 25 (1973) 30-41.

Google Scholar

[27] M. Haroon, D.E. Adams, Y.W. Luk, A Technique for Estimating Linear Parameters Using Nonlinear Restoring Force Extraction in the Absence of an Input Measurement, ASME J. of Vib. and Acoust. 127 (2005) 483–492.

DOI: 10.1115/1.2013293

Google Scholar

[28] J. Iwaniec, Selected issues of exploitational identification of nonlinear systems (in Polish), AGH University of Science and Technology Press, Krakow, (2011).

Google Scholar

[29] J. Goliński, Vibroinsulation of machines and systems (in Polish), WNT, Warsaw, (1979).

Google Scholar

[30] J.P. Den Hartog, Mechanical Vibrations (in Polish), PWN, Warsaw, (1971).

Google Scholar

[31] W. Rubinowicz, W. Królikowski, Theoretical mechanics (in Polish), PWN, Warsaw, (1971).

Google Scholar

[32] G. Cieplok, Vibration amplitude of symmetrically suspended vibrational machine during transient resonance (in Polish), Technical Journal z. 1-M, Cracow University of Technology Publishing House, 27-45, (2008).

Google Scholar

[33] J. Lipiński, Foundations for machines (in Polish), Arkady, Warsaw, (1985).

Google Scholar