Paper Titles

Experience of Hot Pack Rolling Application for Production of Specific Steels or Creep Resistant Alloys
p.699

Kinematic and Dynamic Conditions in Metal Rolling of Porous Materials
p.705

Mathematical Model of Temperature Conditions of Sheet Mills with Furnace Coilers
p.711

Investigation of the Effect of Welding Heat Input and Focal Distance of Laser Beam on Penetration Depth and Dynamics of Welding Pool Using a High-Speed Video Camera
p.721

Regularities in Bimetal Joint Formation at Explosion Welding with Simultaneous Stamping
p.733

Research the Effect of Stress-Pulse Regulation on the Process of Manual Arc Welding Technological Plates Made of AMg6 Alloy Sheet Material 4mm Thickness
p.739

Development of Technology for Welding Repair of Steel Housings Using a Combination of Ultrasonic Vibrations and Forced Cooling
p.747

Analysis of the Formation of Welded Joints from Non-Ferrous Alloy
p.753

The Selection of Parameters for Automatic Welding of the Nuclear Reactors Pipelines
p.760

HomeMaterials Science ForumMaterials Science Forum Vol. 989Regularities in Bimetal Joint Formation at...

Regularities in Bimetal Joint Formation at Explosion Welding with Simultaneous Stamping

Article Preview

Abstract:

This paper reports the investigation of the effect of a plate dynamic loading scheme upon bimetal joint formation at explosion welding with simultaneous stamping. The investigation results of the effect of technological parameters and matrix material upon a radial deformation and quality of explosive pressed аrmco iron+steel 3 bimetal are shown. It is determined experimentally, that additional punching in modes common for explosion welding, without their intensification, allow achieving considerable deformations and manufacturing qualitative bimetal blanks with a high factor of a part form.

You might also be interested in these eBooks

Materials Science and Metallurgical Technology II

Info:

Periodical:

Materials Science Forum (Volume 989)

Pages:

733-738

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.989.733

Citation:

Cite this paper

Online since:

May 2020

Authors:

Vladimir I. Kuz'min, Vladimir I. Lysak, Evgeniy V. Kuz’min*

Keywords:

Deflection, Durability, Explosion Welding, Matrix, Radial Deformation, Stamping

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

[1] F. Findik, Recent developments in explosive welding, Materials and Design. 32 (2011) 1081-1093.

DOI: 10.1016/j.matdes.2010.10.017

[2] V.I. Lysak, S.V. Kuzmin, Energy balance during explosive welding, Journal of Materials Processing Technology. 222 (2015) 356-364.

DOI: 10.1016/j.jmatprotec.2015.03.024

[3] Akbari Mousavi, S.A.A., Riahi, M., Hagh Parast, A. Experimental and numerical analyses of explosive free forming, Journal of Materials Processing Technology. 187 (2007) 512-516.

DOI: 10.1016/j.jmatprotec.2006.11.208

[4] P.P. Lepikhin, V.A. Romashchenko, Y.N. Babich, O.S. Beiner, V.F. Demenko, Evaluation of the dynamic strength of cylindrical and conic matrices of finite length for stamping by high explosives, Strength of Materials. 37 (2005) 146-158.

DOI: 10.1007/s11223-005-0027-9

[5] T. Fiedler, M. Borovinšek, K. Hokamoto, M. Vesenjak, High-performance thermal capacitors made by explosion forming, International Journal of Heat and Mass Transfer. 83 (2015) 366-371.

DOI: 10.1016/j.ijheatmasstransfer.2014.12.025

[6] A. Dibbo, Explosion bonding and forming provides solutions to increasingly severe material requirements, Metallurgia. 64 (1997) 357-357.

[7] T. Z. Blazinski, Explosive welding, forming and compaction, London. New York: Appl. Sci. publ., (1983).

[8] M. P. Bondar, A. I. Dmitriev, Plastic deformation in mesocomposite materials under dynamic loading as applied to their joining with metals, Physical Mesomechanics. 19 (2016) 420-429.

DOI: 10.1134/s1029959916040081

[9] Y. P. Trykov, V. N. Arisova, L. M. Gurevich, A. F. Trudov, D. N. Gurulev, Effect of plastic deformation on the structure and properties of laminated composite materials, Welding International. 16 (2002) 890-893.

DOI: 10.1080/09507110209549632

[10] A. N. Kriventsov, V. S. Sedykh, A. V. Baluev, V. I. Kuz'min, Special features of explosion welding in zones of bends of welded elements, Welding International. 12 (1998) 642-646.

DOI: 10.1080/09507119809452027

[11] V. G. Shmorgun, Evaluation of the consumption of energy in plastic deformation in the wave formation zone in explosion welding, Welding International. 15 (2001) 662-664.

DOI: 10.1080/09507110109549421

[12] B. Crossland, Explosive welding of metals and its application, Oxford: Clarendon press, (1982).

[13] B. S. Zlobin, V. V Silvestrov, A. A. Shtertser, A. V. Plastinin, V. V. Kiselev, Enhancement of explosive welding possibilities by the use of emulsion explosive, Archives of Metallurgy and Materials. 59 (2014) 1587-1592.

DOI: 10.2478/amm-2014-0269

[14] A. N. Kriventsov, V. I. Kuz'min, Energy distribution in explosion welding, Welding International. 19 (2005) 814-820.

DOI: 10.1533/wint.2005.3530

[15] V. N. Goulbin, N. A. Adamenko, Y. P. Trykov, A. V. Fetisov, A. V. Kazurov, Explosive treatment application for production of metal-polymer composite materials, Journal De Physique. IV France. 110 (2003) 935-939.

DOI: 10.1051/jp4:20020814

[16] D. Mynors, B. Zhang, Applications and capabilities of explosive forming, Journal of Materials Processing Technology. 125 (2002) 1-25.

DOI: 10.1016/s0924-0136(02)00413-2

[17] V. Y. Zorik, Theoretical grounds of designing technological system for manufacture of complex sheet parts by explosive stamping, Kuznechno-Shtampovochnoe Proizvodstvo (Obrabotka Metallov Davleniem). 11 (2002) 29-35.

[18] V. I. Kuz'min, A. N. Kriventsov, A. V. Baluev, Kinetics of flight and determination of the velocity of movement and collision of a packet in explosion welding, Welding International. 14 (2000) 661-664.

DOI: 10.1080/09507110009549247

[19] V.I. Lysak, S.V Kuzmin, Explosive welding of metal layered composite materials. Ed. B. E. Paton. Kiev: E.O. Paton Electric Welding Institute of the NASU, (2003).

DOI: 10.37434/tpwj2020.04.02

[20] V. G. Petushkov, V. A. Simonov, V. S. Sedikh, Y. I. Fadeenko, Explosion welding criteria, Kiev: Harwood acad. Publ., (1996).

[21] B. Gulenc, Investigation of interface properties and weldability of aluminum and copper plates by explosive welding method, Materials and Design. 29 (2008) 275-278.

DOI: 10.1016/j.matdes.2006.11.001

[22] V.I. Kuz'min, V.I. Lysak, A.N. Kriventsov, M.A. Iakovlev, Critical conditions of the formation and failure of welded joints in explosive welding, Welding International. 18 (2004) 223-227.

DOI: 10.1533/wint.2004.3270

[23] Y.P. Trykov, V.N. Arisova, L. M. Gurevich, A. F. Trudov, D. N. Gurulev, Effect of plastic deformation on the structure and properties of laminated composite materials, Welding International. 16 (2002) 890-893.

DOI: 10.1080/09507110209549632