Experimental Study on the Influence of Cutting Parameters on Thread Precision of External Thread Turning

Kang Li; Li Jiang; Ming Chen

doi:10.4028/www.scientific.net/MSF.770.7

Paper Titles

Experimental Study on Wear and Fracture of Ball-End Milling Cutter in High Speed Machining Stainless Steel 0Cr13Ni4Mo
p.3

Experimental Study on the Influence of Cutting Parameters on Thread Precision of External Thread Turning
p.7

Experimental Study on Low Alloy TRIP Steel Grinding Ball
p.13

FE Analysis of Stress Concentrations in Composite Plates with Multiple Holes for Zigzag Multi-Fastened Joints
p.17

Femtosecond Laser Micromachining of SiC Ceramic Structures
p.21

Finite Analysis of Cutting Temperature with Internal Lubricating Tool
p.25

Finite Element Simulation of Electromagnetic Properties of Ferrite Material
p.29

Grinding Force and Specific Energy in Plunge Grinding of 20CrMnTi with Monolayer Brazed CBN Wheel
p.34

HomeMaterials Science ForumMaterials Science Forum Vol. 770Experimental Study on the Influence of Cutting...

Experimental Study on the Influence of Cutting Parameters on Thread Precision of External Thread Turning

Abstract:

External thread turning is a complex 3-D process in which the cutting conditions vary over the thread cutter profile. There are a lot of factors that affect the thread precision. This paper focuses on the influences of the lubrication method, cutting speed and the number of passes on the thread precision. Several stainless steel turning tests were conducted. The results showed that lubrication method was the most important factor that affected the thread precision, while the number of passes was the least important one. MQL (Minimum Quantity Lubrication) could reach the effect corresponding to wet cutting at specific cutting parameters and showed great potential to replace traditional lubrication method.