[1]
B. Hopkinson: A method of measuring the pressure in the deformation of high explosives by the impact of bullets. Philos Trans R Soc A213(1914), p.437.
Google Scholar
[2]
R.M. Davies: A critical study of Hopkinson pressure bar. Philos Trans R Soc A240(1948), p.375.
Google Scholar
[3]
H. Kolsky: An investigation of the mechanical properties of materials at very high rates of loading. Proc Phys Soc B62(1949), p.676.
DOI: 10.1088/0370-1301/62/11/302
Google Scholar
[4]
J.L. Chiddister and L.E. Malvern: Compression-Impact tests of Aluminium at Elevated Temperature. Experimental Mechanics. Vol. 3(1963), p.81.
Google Scholar
[5]
J. Harding, E.D. Wood and J.D. Campbell: Tensile testing of material at impact rates of strain. J Mech Eng Sci Vol. 2(1960): p.88.
Google Scholar
[6]
J. Duffy, J.D. Campbell and R.H. Hawley: On the use of a torsional split Hopkinson bar to study rate effects in 1100-0 aluminium. J Appl Mech Vol. 38 (1971), p.83.
DOI: 10.1115/1.3408771
Google Scholar
[7]
S.S. Chiu and V.H. Neubert: Different method for wave analysis of the split Hopkinson pressure bar with a viscoelastic specimen. J Mech Phys Solids Vol. 15(1967), p.177.
DOI: 10.1016/0022-5096(67)90031-2
Google Scholar
[8]
N.N. Dioh, P.S. Leevers and J.G. Willams: Thickness effects in split Hopkinson pressure bar tests. Polymer 34(20)( 1993), p.4230.
DOI: 10.1016/0032-3861(93)90181-9
Google Scholar
[9]
J.C. Gong, L.E. Malvern and D.A. Jenkins: Dispersion investigation in the split Hopkinson pressure bar. J Eng Mater Technol Vol. 112(1990), p.309.
DOI: 10.1115/1.2903329
Google Scholar
[10]
B. Wang, J. Zheng and D.W. Shu: Dynamic stress and strain rate sensitivity of 37wt%Pb 63wt%Sn Eutectic solders. Key Engineering Materials, Vol. 233-236(2002), p.181.
DOI: 10.4028/www.scientific.net/kem.233-236.181
Google Scholar
[11]
B. Wang and D. Shu: Experimental investigation on the viscoelastic properties of porous metals. J. of Materials Processing Technology Vol. 125(2002): p.144.
DOI: 10.1016/s0924-0136(02)00361-8
Google Scholar
[12]
F.E. Hauser: Techniques for measuring stress-strain relations at high strain rates. Expl Mechanics Vol. 6(1966), p.395.
Google Scholar
[13]
C.W. Jiang and M.M. Chen: Dynamic Properties of Materials, Part 2- Aluminium Alloys. Report No. AMMRC CTR(1974), p.74, Watertown, MA.
Google Scholar
[14]
T. Nicholas: Tensile testing of materials at high rates of strain. Expl Mechanics Vol. 21(1981), p.177.
Google Scholar