Distribution & Access For Publication Downloads News About Us Contact Us
Paper Titles
An Investigation on the Impurities of Aluminum Alloy in Melt Furnace
p.1045
An Investigation on the Overheating of A357 Aluminum Alloy
p.1049
Casting of Aluminum Alloy Clad Strip Using a Vertical Type Tandem Twin Roll Caster
p.1053
Roll Casting of Al-25mass%Si
p.1057
Numerical Simulation and Application of Electromagnetic Stirring in Ansteel
p.1061
Mechanical Properties of Heat Treated 30CrMo Steel Produced by Compact Strip Production
p.1065
Heterogeneous Nucleation for AZ91 with In Situ Synthesis Al4C3
p.1069
Secondary Phases Present in Spray Formed Al-10.5Zn-2.0Mg-1.5Cu Alloy
p.1073
Effect of Aluminum Content on Mechanical Properties of Cast Magnesium Alloy Sheets Fabricated by Twin-Roll Casting
p.1077

Numerical Simulation and Application of Electromagnetic Stirring in Ansteel

Article Preview

Abstract:

The numerical simulation and application experiment are used to research the electromagnetic stirring (EMS) in Angang steel company limited. The results show that the stirring effect in side to side position of EMS rolls is better than that in face to face position. And the stirring effect in triples zero patterns are better than that in the double butterfly patterns. The application effect of EMS in Ansteel is obvious. The equiaxed zone in different steel grade such as low carbon aluminum killed steel, pipe steel, silicon steel and high carbon steel is improved 12-25% with EMS. And the slab center segregation has an obvious decreased after using EMS.

You might also be interested in these eBooks
Manufacturing Science and Engineering I View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 97-101)

Pages:

1061-1064

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.97-101.1061

Citation:

Cite this paper

Online since:

March 2010

Authors:

Bai Gang Jin, Ming Chen, Jun Wang, Li Xun Li, Chun Liu, Wen Zhong Wang

Keywords:

Application, Continuous Casting, Electromagnetic Stirring (EMS), Slab

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] S. Asai: ISIJ Int. Vol. 29(1989), p.981.

Google Scholar

[2] J. PARTINEN, N. SALUJA, J. SZEKELY, J. KIRTLEY: ISIJ Int. Vol. 34(1994), p.707.

Google Scholar

[3] H. Harada, E. Anzai, E. Takeuchi: Can. Metall. Q Vol. 39 (2000), p.307.

Google Scholar

[4] T. Takehiko, T. Eiichi, H. Masatake, et al: ISIJ Int. 37 (1997), p.1112.

Google Scholar

[5] B.G. Jin, Q. Wang, D.W. Cui, Y. Liu, J.C. He: Acta Metall Sin. Vol. 43(2007), p.163.

Google Scholar

[6] O. PESTEANU, K. SCHWERDTFEGER: ISIJ Int. 29 (1989), p.1056.

Google Scholar

[7] B.G. Jin, J. Wang, M. CHEN: The 7th China Iron and Steel Meeting. (2009), in press.

Google Scholar

Scientific.Net is a registered brand of Trans Tech Publications Ltd
© 2024 by Trans Tech Publications Ltd. All Rights Reserved