Paper Titles

Effect of Linear Sliding Speed on Wear Behavior of Al₂O₃/TiC Ceramic Composite and Diamond Slicing Blade
p.292

Temperature Prediction at the Blow End of the Converter via Control Model
p.298

Wear Response of Composition-Modulated Multilayer Ni-W Coatings
p.302

Study of Weld Hardness of Pipes at Elevated Temperature Application in Power Plants
p.310

Cutting Ceramic Materials: Influence of Abrasive Machining and Coating Deposition on the Performance Potential
p.317

Effect of Temperature on Deactivation Force of Three Commercial NiTi Orthodontic Archwires
p.325

Comparison of Horizontal and Vertical Deactivation Force, Length and Superelasticity in Three Commercial NiTi Orthodontic Archwires
p.330

Stacking Design of Composite Laminate in Wheelchair Structure under Seat Loading
p.336

Self-Tapping Screws without Pre-Drilling for Brazilian Reflorestation Species
p.345

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 1025-1026Cutting Ceramic Materials: Influence of Abrasive...

Cutting Ceramic Materials: Influence of Abrasive Machining and Coating Deposition on the Performance Potential

Article Preview

Abstract:

Ceramic cutting tools have a large potential by high speed processing of difficult-to-cut steels and alloys, however due to its fragility they don’t assure the required reliability level of cutting process. For improving the operational characteristics of the ceramic cutting tool combined treatment can be used namely the preliminary planetary grinding of the insert surface and the following deposition of the vacuum-plasma coatings (TiCr)N, (ZrCrHf)N and other.

You might also be interested in these eBooks

Advanced Materials, Structures and Mechanical Engineering

Info:

Periodical:

Advanced Materials Research (Volumes 1025-1026)

Pages:

317-324

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.1025-1026.317

Citation:

Cite this paper

Online since:

September 2014

Authors:

Sergey Nikolaevich Grigoriev, Marina Volosova, Yury Andreevich Melnik, Natalia Cherkasova*, Alina Gurkina

Keywords:

Bearing Steel, Ceramic Cutting Tool, Difficult-to-Cut Alloys, Nitrides, Planetary Grinding, Vacuum-Plasma Coating

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

[1] S.N. Grigor'ev and V.V. Kuzin: Grass. Ceram+ Vol. 68, No. 7-8 (2011), p.253.

[2] D.I. Lalwani, N.K. Mehta and P.K. Jain: J. Mater. Process. Tech Vol. 206, No. 1-3 (2008), p.167.

[3] G.C. Benga and A.M. Abrao: J. Mater. Process. Tech. Vol. 143, Special Issue: SI (2003), p.237.

[4] Y. Sahin: J. Mater. Process. Tech. Vol. 209, No. 7 (2009), p.3478.

[5] J. Zhao, X. Yuan and Y. Zhou: Int. J. Refract. Met. H Vol. 28, No. 3 (2010), p.330.

[6] G. Zheng, J. Zhao, Z. Gao, et al.: Int. J. Adv. Manuf. Tech. Vol. 58, No. 1-4 (2012), p.19.

[7] V.V. Kuzin: Refract. Ind. Ceram+ Vol. 47, No. 4 (2006), p.204.

[8] A.S. Vereschaka, S.N. Grigoriev, E.S. Sotova, et al.: Adv. Mater. Res. Vol. 712-715 (2013), p.391.

[9] M.A. Volosova and V.V. Kuzin: Met. Sci. Heat. Treat+ Vol. 54, No. 01-2 (2012), p.41.

[10] A.S. Metel, S.N. Grigoriev, Y.A. Melnik, et al.: Instrum. Exp. Tech+ Vol. 55, No. 02 (2012), p.288.

[11] O.V. Sobol', A.A. Andreev, S.N. Grigoriev, et al.: Probl. Atom. Sci. Techol. Vol. 4 (2011), p.174.

[12] A.S. Metel, S.N. Grigoriev, Y.A. Melnik and V.V. Prudnikov, Glow discharge with electrostatic confinement of electrons in a chamber bombarded by fast electrons, Plasma Physics Reports, Vol. 37, No. 7 (2011), p.628.

DOI: 10.1134/s1063780x11050072

[13] S.N. Grigoriev, Yu.A. Melnik, A.S. Metel, V.V. Panin, Broad beam source of fast atoms produced as a result of charge exchange collisions of ions accelerated between two plasmas, Instruments and Experimental Techniques, Vol. 52, No. 4 (2009).

DOI: 10.1134/s002044120904023x

[14] A. S. Metel, Y. A. Melnik, V. V. Panin: Plasma. Phys. Rep. Vol. 37, No. 04 (2011), p.357.

[15] V.V. Kuzin, M.A. Volosova and M.Y. Fedorov: J. Friction and Wear Vol. 34, No. 03 (2013), p.199.

[16] O.V. Sobol', A.A. Andreev, S.N. Grigoriev, et al.: Met. Sci. Heat. Treat+ Vol. 54, No. 3-4 (2012), p.195.

[17] A.A. Andreev, M.A. Volosova, V.F. Gorban, et al.: Metallofiz. Nov. Tekh+ Vol. 35, No. 8 (2013), p.1151.

[18] S.N. Grigoriev, A.A. Vereschaka, A.S. Vereschaka, et al.: Procedia CIRP Vol. 1 (2012), p.301.