[1]
Z. Fan, Semisolid metal processing, Int. Mater. Rev. 47 (2002) 49-85.
Google Scholar
[2]
Q. Zhu, S. Midson, Semi-solid moulding: Competition to cast and machine from forging in making automotive complex components, Trans. Nonferrous Met. Soc. China 20 (2010) 1042-1047.
DOI: 10.1016/s1003-6326(10)60628-0
Google Scholar
[3]
G. Wallace, A.P. Jackson, S.P. Midson, Q. Zhu, High-quality aluminum turbocharger impellers produced by thixocasting, Trans. Nonferrous Met. Soc. China. 20 (2010) 1786-1791.
DOI: 10.1016/s1003-6326(09)60375-7
Google Scholar
[4]
E.J. Zoqui, 5.09 - Alloys for semisolid processing, in: S. Hashmi, G. F. Batalha, C. J. Van Tyne and B. Yilbas (Eds.), Comprehensive Materials Processing, Elsevier, Oxford, 2014, pp.163-164.
DOI: 10.1016/b978-0-08-096532-1.00520-3
Google Scholar
[5]
L. Wang, M. Makhlouf, D. Apelian, Aluminium die casting alloys: alloy composition, microstructure, and properties-performance relationships, Metall. Rev. 40 (1995) 221-238.
DOI: 10.1179/imr.1995.40.6.221
Google Scholar
[6]
D. Liu, H.V. Atkinson, H. Jones, Thermodynamic prediction of thixoformability in alloys based on the Al–Si–Cu and Al–Si–Cu–Mg systems, Acta. Mater. 53 (2005) 3807-3819.
DOI: 10.1016/j.actamat.2005.04.028
Google Scholar
[7]
H. Möller, U.A. Curle, E.P. Masuku, Characterization of surface liquid segregation in SSM-HPDC aluminium alloys 7075,2024,6082 and A201, Trans. Nonferrous Met. Soc. China. 20 (2010) 847-851.
DOI: 10.1016/s1003-6326(10)60593-6
Google Scholar
[8]
B. Zhou, Y.L. Kang, G.M. Zhu, J.Z. Gao, M.F. Qi, H.H. Zhang, Forced convection rheoforming process for preparation of 7075 aluminum alloy semisolid slurry and its numerical simulation, Trans. Nonferrous Met. Soc. China. 24 (2014) 1109-1116.
DOI: 10.1016/s1003-6326(14)63169-1
Google Scholar
[9]
A. Bolouri, Q.F. Zhao, P. Côté, X.G. Chen, Microstructure and rheological properties of semi-solid 7075 slurries using SEED rheocasting process, Solid. State. Phenom. 256 (2016) 288-293.
DOI: 10.4028/www.scientific.net/ssp.256.288
Google Scholar
[10]
Q. Zhu, S. Midson, C.W. Ming, H.V. Atkinson, Casting and heat treatment of turbocharger impellers thixocast from Alloy 201, Solid. State. Phenom. 192-193 (2013) 556-561.
DOI: 10.4028/www.scientific.net/ssp.192-193.556
Google Scholar
[11]
J.E. Hatch, Aluminum: properties and physical metallurgy, ASM International, Ohio, 1984, p.323.
Google Scholar
[12]
J.Z. Gao, Q. Zhu, D.Q. Li, Y. L. Kang, Microstructural changes and thermal stability of A201, 319s and 2618 aluminum alloys during thermal exposure, Mater. Sci. Forum. 913 (2018) 55-62.
DOI: 10.4028/www.scientific.net/msf.913.55
Google Scholar
[13]
S. Lin, C. Aliravci, M.O. Pekguleryuz, Hot-Tear Susceptibility of Aluminum Wrought Alloys and the Effect of Grain Refining, Metall. Mater. Trans. A. 38 (2007) 1056-1068.
DOI: 10.1007/s11661-007-9132-7
Google Scholar
[14]
S. Li, D. Apelian, Hot tearing of aluminum alloys a critical literature review, Int. J. Metalcast. 5 (2011) 23-40.
DOI: 10.1007/bf03355505
Google Scholar
[15]
P. Côté, M.È. Larouche, X.G. Chen, New developments with the SEED technology, Solid. State. Phenom. 192-193 (2013) 373-378.
DOI: 10.4028/www.scientific.net/ssp.192-193.373
Google Scholar
[16]
S.N. Dubey, Design and evaluation of an enhanced constrained rod casting mold for experimental characterization of hot tearing in aluminum casting alloys, Int. J. Cast Met. Res. 30 (2017) 201-216.
DOI: 10.1080/13640461.2017.1286553
Google Scholar