Paper Titles

Structural-Phase State and Strength Properties of Pressure-Synthesized Ni₃Al Intermetallic Compound
p.95

Structure and Properties of the Surface Layer of a Wear-Resistant Coating on Martensitic Steel after Electron-Beam Processing
p.101

Studying the Influence of Tungsten and Chromium Additives in Flux Cored Wire System Fe-C-Si-Mn-Mo-Ni-V-Co on Surfaced Metal Properties
p.107

The Change in the Thin Structure and Mechanical Properties of Aluminum Alloys at Intensive Plastic Deformation
p.114

Welding Technology in Additive Manufacturing Processes of 3D Objects
p.121

Aluminosilicate Microsphere Synthesis in Plasma Flow
p.131

Comparative Analysis of Hygiene and Sanitary Characteristics of Consumable Electrode Gas-Shielded Welding
p.137

Influence of Gas Dynamic Processes on Chemical Composition of Hardfaced Layer when Restoring Machine Parts Manufactured from 40H Steel
p.142

Scanning the Welded Seams of Titanium Alloys by Using Subminiature Eddy Current Transducers
p.147

HomeMaterials Science ForumMaterials Science Forum Vol. 906Welding Technology in Additive Manufacturing...

Welding Technology in Additive Manufacturing Processes of 3D Objects

Article Preview

Abstract:

Using of welding technologies to produce metal volume objects allows considerable lowering of their manufacturing cost at simultaneous increase in productivity, compared to SLS-and SLM-processes. The most perspective welding technology of additive manufacturing of three-dimensional objects is plasma-arc technology with application of wires or powders. It allows creating at comparatively low heat input quality volumetric products with wall thickness from 3 to 50 mm from alloys based on Fe, Ni, Co, Cu, Ti, Al, as well as composite materials, containing refractory components.

You might also be interested in these eBooks

Materials and Processing Technology

Info:

Periodical:

Materials Science Forum (Volume 906)

Pages:

121-130

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.906.121

Citation:

Cite this paper

Online since:

September 2017

Authors:

V. Korzhyk, V. Khaskin, O. Voitenko, V. Sydorets*, O. Dolianovskaia

Keywords:

3D-Printing Process, Properties, SLM-Processes, Welding

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

[1] Kruth J P, Leu M C and Nakagawa T (1998) Progress in additive manufacturing and rapid prototyping CIRP Annals-Manufact Techn 47(2) 525-540.

DOI: 10.1016/s0007-8506(07)63240-5

[2] Laser Technologies for Treatment of Materials: Current Problems of Fundamental Studies and Applied Developments: Chapter: Laser technologies of rapid prototyping and direct fabrication of 3D objects 2009 (Moscow: Fizmatlit).

[3] Slyusar V I 2003 Fabber-technologies. New tool for 3D modeling Elektronika: Nauka, Tekhnologiya, Bizness 5 54–60.

[4] Deckard C R and Beaman J J 1987 Recent Advances in Selective Laser Sintering. In: Proc. of 14th Conf. on Production Research and Technology (Michigan, 1987) 447–451.

[5] Kablov E N 2015 Additive Technologies as the Dominant of National Technology Initiative Intellekt & Tekhnologii 2(11) 52-55.

[6] Bruce M R, Riley S F, Cola M J, et al 2012 Measurement and Simulation of Titanium Alloy Deposit Temperature in Electron Beam Additive Manufacturing. In: Trends in Welding Research: Proc. of 9th Int. Conf. (Chicago, USA, 4-8 June 2012) 963-969.

[7] Kruth J P 2004 Selective Laser Melting of Iron-Based Powder J Mater Process Tech 149 616-622.

[8] Karunakaran K P, Suryakumar S, Pushpa V, Akula S 2010 Low Cost Integration of Additive and Subtractive Processes for Hybrid Layered Manufacturing Robotics and Comp-Integr Manufact 26(5) 490-499.

DOI: 10.1016/j.rcim.2010.03.008

[9] Colegrove P, Williams S 2013 High Deposition Rate High Quality Metal Additive Manufacture Using Wire + Arc Technology http: /xyzist. com/wp-content/uploads/2013/12/Paul-co-legrove-cranfield-Additivemanufacturing. pdf.

[10] Venuvinod P K and Ma W 2004 Rapid Prototyping: Laser-Based and Other Technologies. In: Springer Science & Buisness Media (New York: Springer).

[11] Doyle T E and Ryan P M 1989 Cooling Workpieces Being Manufactured by Shape Melting Pat. EP0340939A1 (US4857694). Int. cl. B23K9/04, B23K37/003, B23K37/00F. Publ. 8. 11. 89.

[12] Martina F 2014 Investigation of Methods to Manipulate Geometry, Microstructure and Mechanical Properties in Titanium Large Scale Wire + Arc Additive Manufacturing In: School of Aerospace, Transport and Manufacturing (Cranfield University).

[13] Kovacevic R 2003 Development of Machine for Rapid Manufacturing/Repair In: The 2003 CTMA Symp (Salt Lake city, USA, March 31-April 3, 2003).

[14] Alhuzaim A F 2014 Investigation in the Use of Plasma Arc Welding and Alternative Feedstock Delivery Method in Additive Manufacture Thesis submitted in partial fulfillment of the requirements for the degree of Master of Sci. General Eng (University of Motana).

[15] Baufeld B, Van der Biest O and Gault R S 2010 Additive Manufacturing of Ti–6Al–4V Components by Shaped Metal Deposition: Microstructure and Mechanical Properties Mat & Design 31 106-111.

DOI: 10.1016/j.matdes.2009.11.032

[16] Clark D, Bache M R and Whittaker M T 2008 Shaped Metal Deposition of a Nickel Alloy for Aero Engine Applications J Mat Proc Tech 203 439-448.

DOI: 10.1016/j.jmatprotec.2007.10.051

[17] Chad H 2014 Metallic Additive Manufacturing: Comprehensive Overview and Findings on 3D-Printing for Construction http: /www2. iceaustralia. com/ei/images/cmic14/cmicpresentations/ plenary/henry. pdf.

[18] Art of Grigory Dochkin 2015 In: CWELD — Equipment and Materials for Welding and Cutting, 01. 08. 2015; http: /adios-group. ru/?p=242.

[19] 3D-welding from MX3D will Print-out the Bridge above the Water 2015 http: /weldworld. ru/ news/razraborki/5583-3d-svarka-ot-mx3d-raspechataet-most-nad-vodoy. html.