Preface, Organizers and Supporters
Influence of Homogenization Treatment on Electrochemical Behavior of the Mg-0.8wt%Ga-0.8wt%In Anode Materials
p.1
p.1
Study of Ca and Ce Additions on Different Ignition Resistance Behavior of Magnesium Alloy
p.7
p.7
Process and Property of Superplastic Mould Forged AZ80 Wheel Hub
p.12
p.12
Influence of Various Precipitate Phases on Tensile Properties of an Extruded Mg-Y-Nd Alloy
p.17
p.17
Microstructure, Texture and Mechanical Properties of Mg-2.0Zn-0.3Gd Alloy Sheets Fabricated by Large Strain Hot Rolling
p.23
p.23
Production of Primary Magnesium by the Aluminothermic Reduction of Magnesia Extracted from Dolomite Ore
p.28
p.28
Effect of Nd and Dy Addition on AZ91D Ignition Temperature and Microhardness
p.34
p.34
Influence of Various Heat Treatment on Corrosion Resistance of As-Extruded Mg-9Li-3Al-2.5Sr Alloys
p.41
p.41
Process and Property of Superplastic Mould Forged AZ80 Wheel Hub
Abstract:
Automobile wheel hub of Mg alloy with single-step extrusion-forging process was developed, and the microstructure and mechanical properties after heat treatment were investigated. The forged hubs have a hub wall of as thin as 3mm, and 4-7kg lighter than that of Al alloy wheel hub with a same size and design of each wheel hub, that would lead remarkable reduction of fuel consumption. The tensile strength larger than 308 MPa, good corrosion fatigue and impacting resistance sampled from the hubs obtained.
You might also be interested in these eBooks
Info:
Periodical:
Materials Science Forum (Volume 788)
Pages:
12-16
Citation:
Online since:
April 2014
Authors:
Keywords:
Price:
Permissions: