Effect of Solution Heat Treatment and Additives on the Microstructure of Al – Si (A413.1) Automotive Alloys
p.399
p.399
Prediction of Static Recrystallisation after Extrusion of Shaped Aluminium Sections
p.407
p.407
New Grain Formation in a Coarse-Grained 7475 Al Alloy during Severe Hot Forging
p.421
p.421
Texture Changes during Uniaxial Compression of Mg-3Al-1Zn
p.429
p.429
Effect of Grain Size on the Deformation and Dynamic Recrystallization of Mg-3Al-1Zn
p.435
p.435
Grain Growth Texture Evolution in Zirconium (Zr702) and Commercially Pure Titanium (T40)
p.441
p.441
Texture Development of Ni3Al Thin Foils during Recrystallization and Grain Growth
p.447
p.447
Experimental Investigations of Recrystallization Texture Development in Zirconium (Zr702)
p.453
p.453
The Recrystallization Behaviour of CP-Titanium
p.459
p.459
Effect of Grain Size on the Deformation and Dynamic Recrystallization of Mg-3Al-1Zn
Abstract:
The influence of grain size on the deformation of extruded Mg-3Al-1Zn tested in tension at temperatures between room temperature and 300°C is investigated. The results enable estimation of the deformation conditions for the transition from slip to twinning dominated flow and for the initiation and completion of dynamic recrystallization. A map illustrating these critical parameters is constructed and it is shown that the operating conditions of the common wrought processes straddle key transitions in microstructure behaviour.
You might also be interested in these eBooks
Info:
Periodical:
Materials Science Forum (Volumes 467-470)
Pages:
435-440
Citation:
Online since:
October 2004
Authors:
Price:
Permissions: