High Temperature Oxidation Behaviour of Base Material and Laser-Weld Specimens of a Thin FeCrAl-RE Foil at Around 900°C

H. El Kadiri; Régine Molins; Yves Bienvenu

doi:10.4028/www.scientific.net/MSF.461-464.1157

Paper Titles

State of the Sub-Surface Microstructure of Carbides Strengthened Cast Superalloys after High Temperature Oxidation – Use of Thermodynamic Modelling for a Better Understanding
p.1117

Three Examples of High-Temperature Corrosion of Metals by Molten Glasses
p.1125

A New General and Rapid Method for Investigating Hot Corrosion: Preliminary Tests on Electrodes for Molten Carbonate Fuel Cells
p.1133

Approach of the Corrosion Behaviour of T91 Steel in Lead or Lead-Bismuth Liquid Bath
p.1141

High Temperature Performance of Ferritic Stainless Steels Manufactured by Powder-Metallurgy
p.1149

High Temperature Oxidation Behaviour of Base Material and Laser-Weld Specimens of a Thin FeCrAl-RE Foil at Around 900°C
p.1157

Corrosion of High Temperature Alloys in the Coolant Helium of a Gas Cooled Reactor
p.1165

Influence of the Microstructural Texture of Cast Superalloys on their High-Temperature Oxidation Behaviour
p.1173

Oxidation and Hot-Corrosion Behavior of Sputtered Ti-48Al-8Cr-2Ag Nanocrsytalline Coating
p.1181

HomeMaterials Science ForumMaterials Science Forum Vols. 461-464High Temperature Oxidation Behaviour of Base...

High Temperature Oxidation Behaviour of Base Material and Laser-Weld Specimens of a Thin FeCrAl-RE Foil at Around 900°C

Abstract:

You might also be interested in these eBooks

High Temperature Corrosion and Protection of Materials 6

View Preview

Info:

Periodical:

Materials Science Forum (Volumes 461-464)

Pages:

1157-1164

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.461-464.1157

Citation:

Cite this paper

Online since:

August 2004

Authors:

H. El Kadiri, Régine Molins, Yves Bienvenu

Keywords:

Chromium Carbides, Grain Growth, Interface, Kinetic, Laser Welding, Metastable Alumina, Reactivity Anomaly, Thickening of the Platelets, Transformation, α-Al₂O₃ Nucleation

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] A. Germidis: Doctoral Thesis ENSMP (1996).

Google Scholar

[2] J.D. Bartout, Y. Bienvenu, J. Favennec and M. Dubus: in Bulletin du Cercle d'études des métaux, tome XVI, n° 14, (1997), p.19. 1.

Google Scholar

[3] H. El kadiri: Doctoral Thesis, ENSMP (2004).

Google Scholar

[4] V. Semak and A. Matsunawa: J. Phys. D: Appl. Phys. Vol. 30 (1997), p.2541.

Google Scholar

[5] H. El Kadiri, R. Molins and Y. Bienvenu: in this symposium.

Google Scholar

[6] J. Jedlinski: Oxid. Met. Vol. 39 [1/2] (1993), p.55.

Google Scholar

[7] H.J. Grabke: Mat. Sci. Forum, Vols. 251-254 (1997), p.149.

Google Scholar

[8] M. Wittmer: J. appl. Physics., Vol. 53/2 (1982), p.1007.

Google Scholar

[9] T. Sundararajan, S. Kuroda, T. Itagaki. and F. Abe: Adv. Sci. & Appl. Tech. ASM. Int. P (2003).

Google Scholar

[10] G.B. Abderrazik, G. Moulin, A.M. Huntz and R. Berneron: J. Mat. Sci. Vol. 19 (1984), p.3173.

Google Scholar