Paper Titles

Deactivation of Red Mud by Primary Aluminum Production Wastes
p.109

Comparative Wear Resistance of Existing and Prospective Materials of Fast-Wearing Elements of Mining Equipment
p.117

Determination of the Optimal Structure of a Layered Composite Material for Maximum Strength Characteristics
p.124

Properties of Microfibers of Various Compositions as a Component of Cellular Composites
p.132

Increase of Stainless Steel Wear Resistance by Diffusion Chromium Plating Using Iodine Transport
p.139

Properties of Cement with Photocatalytic Composite Material
p.153

Effect of Agents of Initiation of Carbonate Biomineralization on Cement Properties
p.159

Influence of a Hydrophobic Emulsion on the Surface Properties of Coatings of Water-Dispersion Acrylic Paint
p.165

Gas Atomization of X6CrNiTi18-10 Stainless Steel Powder for Selective Laser Melting Technology
p.172

HomeMaterials Science ForumMaterials Science Forum Vol. 1040Increase of Stainless Steel Wear Resistance by...

Increase of Stainless Steel Wear Resistance by Diffusion Chromium Plating Using Iodine Transport

Article Preview

Abstract:

The article presents the results of a study of diffusion chromium plating of stainless steel X20Cr13 by iodine transport. The main kinetic laws of the process - the effect of temperature and time of chromium plating on the thickness of the coatings - have been studied. It is shown that the main phases of the coating are chromium carbides and nitrides with surface microhardness HV up to 15 GPa. The tribotechnical properties of the obtained coatings on rollers - friction pairs are determined.

You might also be interested in these eBooks

Advanced Materials in Industrial and Environmental Engineering II

Info:

Periodical:

Materials Science Forum (Volume 1040)

Pages:

139-152

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.1040.139

Citation:

Cite this paper

Online since:

July 2021

Authors:

Sergey P. Bogdanov, Nikolay A. Khristiuk, A.V. Anisimov, Maxim М. Sychov*

Keywords:

Diffusion Chromium Plating, Gas Transport, Stainless Steel, Wear Resistance

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

[1] V.F. Loskutov et al., Diffusion carbide coatings, Tekhnika, Kiev, 1991. 168 p.

[2] I.M. Kovensky, V.V. Povetkin, Metallurgy of coatings, Sp. Intermet Engineering, Moscow, 1999. 295 p.

[3] F. Czerwinski, Heat Treatment - Conventional and Novel Applications, InTech, Janeza, Croatia, 2012. 408 p.

[4] G.V. Borisenok, L.A. Vasiliev, L.G. Voroshnin et al., Chemical - heat treatment of metals and alloys: a reference book, Metallurgy, Moscow, 1981. 424 p.

[5] Yu. M. Lakhtin, B.N. Arzamasov, Chemical - thermal treatment of metals, Metallurgy, Moscow, 1985. 256 p.

[6] Q.J. Wang, Y.W. Chung, Encyclopedia of tribology, Springer science + Business Media, New York, 2013. 4192 p.

[7] W. Lee, J. Duh, Evaluation of microstructures and mechanical properties of chromized steels with different carbon content, Surface and Coatings Technology 177-178 (2004) 525-531.

DOI: 10.1016/j.surfcoat.2003.08.031

[8] J. W. Lee, H. C. Wang, J. L. Li, C. C. Lin, Tribological properties evaluation of AISI 1095 steel chromized at different temperatures, Surface and coatings technology 188-189 (2004) 550-555.

DOI: 10.1016/j.surfcoat.2004.07.011

[9] N. Lin, F. Xie, H. Yang, W. Tian, H. Wang, B. Tang, Assessments on friction and wear behaviors of P110 steel and chromizing coating sliding against two counterparts under dry and wet conditions, 258 (2012) 4960-4970.

DOI: 10.1016/j.apsusc.2012.01.128

[10] C. Y. Bai, M. D. Ger, M. S. Wu, Corrosion behaviors and contact resistances of the low-carbon steel bipolar plate with a chromized coating containing carbides and nitrides, International journal of hydrogen energy 34 (2009) 6778-6789.

DOI: 10.1016/j.ijhydene.2009.05.103

[11] S.B. Lee, K.H. Cho, W. G. Lee, H. Jang, Improved corrosion resistance and interfacial contact resistance of 316L stainless steel for proton exchange membrane fuel cell bipolar plates by chromizing surface treatment, Journal of Power Sources 187 (2009) 318-323.

DOI: 10.1016/j.jpowsour.2008.11.064

[12] A. Agüero, V. González, M. Gutiérrez, R. Muelas, Oxidation under pure steam Cr based protective oxides and coatings, Surface and coatings technology 237 (2013) 30-38.

DOI: 10.1016/j.surfcoat.2013.09.016

[13] B.N. Arzamasov, V.N. Simonov, Circulation method of applying diffusion coatings, Metallurgy and heat treatment of metals 9 (2010) 3-7.

[14] G.H. Meier, C. Cheng, R.A. Perkins, W. Barker, Diffusion chromizing of ferrous alloys, Surface and Coatings Technology 39–40 (1989) 53-64.

DOI: 10.1016/0257-8972(89)90040-6

[15] R.F. Rolsten, Iodide metals and metal iodides, Metallurgy, Moscow, 1968. 524 p.

[16] S.P. Bogdanov, Obtaining coatings on powders by the method of iodine transport, Glass Physics and Chemistry 37(2) (2011) 229-237.

[17] R. Ripan, I Chetyanu, Inorganic chemistry. Chemistry of metals, Mir, Moscow, 1972. Vol. 2, 871 p.

[18] Xiaowei Yin I. et al 2005 Formation of titanium carbide on graphite via powder immersion reaction assisted coating, Materials Science and Engineering, A 396 (2005) 107-114.

DOI: 10.1016/j.msea.2005.01.011

[19] A.V. Khvan, B. Hallstedt, Ch. Broeckmann, A thermodynamic evaluation of the Fe – Cr – C system, CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry 46 (2014) 24-33.

DOI: 10.1016/j.calphad.2014.01.002

[20] S.P. Bogdanov, N.A. Khristiuk, Use of iodine transport for diffusion chromium plating of steel, Steel 1 (2017) 67-72.