A Study of Cutting Strategy in Single-Point Diamond Turning of Micro V-Groove Patterns on Precision Roller Drums

C.H. Mak; C.F. Cheung; M.J. Ren; L.B. Kong; S. To

doi:10.4028/www.scientific.net/KEM.625.742

Paper Titles

Optical Simulation of Omnidirectional Inspection System for Screw Threads
p.706

Study of Mechanism for Wear Adjustment with Electro Wedge Brake
p.712

Swirl-Based Control Method of Cell Orientation-Impact on Control Performance with Eccentricity
p.717

Tuning the Shear Modulus of Single-Walled Carbon Nanotube by Feeding Van Der Waals Molecules
p.722

Visual-Servoing Control of Robot Hand with Estimation of Full Articulation of Human Hand
p.728

Wettability of Polymeric Bionic Surface Replicated from Ginkgo Leaves
p.736

A Study of Cutting Strategy in Single-Point Diamond Turning of Micro V-Groove Patterns on Precision Roller Drums
p.742

Analysis and Optimization of a Vibration Isolation Platform Based on 6-DOF Parallel Mechanism
p.748

Chemically Etched Axicon Fiber as a Sensor Probe of Optical Coherence Tomography
p.754

HomeKey Engineering MaterialsKey Engineering Materials Vol. 625A Study of Cutting Strategy in Single-Point...

A Study of Cutting Strategy in Single-Point Diamond Turning of Micro V-Groove Patterns on Precision Roller Drums

Abstract:

This paper presents a study of cutting strategies on the surface generation in single-point diamond turning of micro V-groove patterns on precision roller drums. An aluminium precision roller drum with a diameter 250mm and 100 long was diamond turned with a V-groove pattern. A series of cutting experiments were designed to study the effect of the variation of various cutting parameters and cutting tool paths on the surface quality in diamond turning of the precision roller drum. The parameters under investigation included the depth of cut, number of steps and the depth for each cut when diamond turning V-grooves on the cylindrical surface of a workpiece. The measurement result indicates that the surface quality of V-grooves machined on the precision roller drums is affected by cutting strategies. The optimal cutting strategy for machining a V-groove pattern on a precision drum with 5µm depth was obtained.

You might also be interested in these eBooks

Precision Engineering and Nanotechnology V

View Preview

Info:

Periodical:

Key Engineering Materials (Volume 625)

Pages:

742-747

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.625.742

Citation:

Cite this paper

Online since:

August 2014

Authors:

C.H. Mak*, C.F. Cheung, M.J. Ren, L.B. Kong, S. To

Keywords:

Cutting Strategy, Micro-Structured Pattern, Precision Roller Drum, Ultra-Precision Machining, V-Groove

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] Tun-Chien Teng and Ming-Feng Kuo. Highly precise optical model for simulating light guide plate using LED light source, Optics Express, Vol. 18, Issue 21, pp.22208-22214 (2010).

DOI: 10.1364/oe.18.022208

Google Scholar

[2] C. H. Wu, and C. H. Lu, Fabrication of an LCD light guide plate using closed die hot embossing, J. Micromech. Microeng. 18(3), 035006 (2008).

DOI: 10.1088/0960-1317/18/3/035006

Google Scholar

[3] TE-LI SU, HUA-WEI CHEN, CHIEH-FU LU, Systematic Optimization for the Evaluation of the Microinjection Molding Parameters of Light Guide Plate with TOPSIS-Based Taguchi Method, Advances in Polymer Technology, Vol. 29, No. 1, 54–63 (2010).

DOI: 10.1002/adv.20181

Google Scholar

[4] Chen-Lung Kuo, Chung-Kuang Wei, Masaru Suzuki, Wen-Tsung Lin, Wang-Yang Li and Li-Yi Chen", Invited Paper: Large-area TFT-LCD using MVA-LCD Mode for TV Applications", SID 03 DIGEST , pp.1200-1203 (2003).

DOI: 10.1889/1.1832502

Google Scholar

[5] Kong, L.B. and Cheung, C.F., Modeling and characterization of surface generation in fast tool servo machining of microlens arrays, Computers & Industrial Engineering, Vol. 63, No. 4, pp.957-970 (2012).

DOI: 10.1016/j.cie.2012.06.007

Google Scholar

[6] Lee W.B., To S., Cheung C.F., Design and Advanced Manufacturing Technology for Freeform Optics, The Hong Kong Polytechnic University, Hong Kong, (2005).

Google Scholar

[7] To, S., Cheung, C.F. and Lee, W.B. Influence of Material Swelling Upon Surface Roughness in Diamond Turning of Single Crystals, Materials Science and Technology, Vol. 17, No. 1, pp.102-108 (2001).

DOI: 10.1179/026708301101509025

Google Scholar

[8] Cheung, C.F. and Lee, W.B. Study of Factors Affecting the Surface Quality in Ultra-precision Diamond Turning, Materials and Manufacturing Processes, Vol. 15, No. 4, pp.481-502(2000).

DOI: 10.1080/10426910008913001

Google Scholar