Distribution & Access For Publication Downloads News About Us Contact Us
Paper Titles
Reconstruction of Cranial Bone Defects Using a Compound of Bone Marrow Stromal Cells and Hydroxyapatite-Tricalcium Phosphate
p.1235
Preparation of Hydroxyapatite Coatings on Carbon/Carbon Composites by a Hydrothermal Electrodeposition Process
p.1238
Residual Stress and Reliability of Glass/Alumina Dental Bi-Layer Ceramics
p.1241
Effect of Multiple Firing on Wear Behavior of Dental Veneering Ceramic
p.1245
Strength and Fracture Mode for Dental Colored ZrO2 Ceramics Coated with Dental Porcelain
p.1248
Mechanical Properties and Microstructure of Partially Sintered Zirconia Ceramics
p.1252
Study on Dental Colored Zirconia Restoration
p.1255
Bond Strengths of Alumina-Glass and Zirconia-Glass Composites to Opaque-Dentine Porcelain
p.1258
In Vitro Biocompatibility Evaluations of Four Dental Ceramics
p.1261

Strength and Fracture Mode for Dental Colored ZrO2 Ceramics Coated with Dental Porcelain

Article Preview

Abstract:

The purpose of this study was to investigate the flexural strength and the mode of failure of dental colored ZrO2 ceramics with or without porcelain coating. Colorants (Fe2O3,CeO2, etc.) were mixed with 3Y-TZP powder to prepare colored dental zirconia. Specimens were made in monolithic or bilayered forms which were coated with veneering porcelain. Experimental results showed that there were not significantly differences of bending strengths between white and colored materials or between bilayered specimen, while the strength of monolithic specimen were significantly higher than their bilayered counterpart. In all bilayered specimens, the bulk fracture initiated at the tensile surface of the core material and was consistently accompanied with porcelain crush and delamination at the interface. Colorants for 3Y-TZP had minor effects on its mechanical properties.

You might also be interested in these eBooks
High-Performance Ceramics V View Preview

Info:

Periodical:

Key Engineering Materials (Volumes 368-372)

Pages:

1248-1251

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.368-372.1248

Citation:

Cite this paper

Online since:

February 2008

Authors:

Yuan Fu Yi, Hong Chen Liu, Yong Zhao Lin, Bin Deng, Ning Wen, Jie Mo Tian

Keywords:

Color, Dental Ceramic, Mechanical Property, Zirconia

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] M. Guazzato, K. Proos, L. Quach, et al.: Biomater. Vol. 25(2004), p.5045.

Google Scholar

[2] S.N. White, V.G. Miklus, E.A. Mclaren, et al.: J. Prosthet. Dent. Vol. 94(2005), p.125.

Google Scholar

[3] G.P. Fleming, M. Dickens, L.J. Thomas, et al.: Dent. Mater. Vol. 22(2006), p.771.

Google Scholar

[4] N. Wakabayashi and K.J. Anusavice: J. Dent. Res. Vol. 79(2000), p.1398.

Google Scholar

[5] M.N. Aboushelib, C.J. Kleverlaan, and A.J. Feilzer: Dent. Mater. Vol. 22(2006), p.857.

Google Scholar

[6] M.N. Aboushelib, N. de Jager, C.J. Kleverlaan, et al.: Dent. Mater. Vol. 23(2007), p.952.

Google Scholar

[7] M. Guazzato, L. Quach, M. Albakry, et al.: J. Dent. Vol. 33(2005), p.9.

Google Scholar

Scientific.Net is a registered brand of Trans Tech Publications Ltd
© 2024 by Trans Tech Publications Ltd. All Rights Reserved