Distribution & Access For Publication Downloads News About Us Contact Us
Paper Titles
Preface
Study of Nanolayer AlTiN/TiN Coating Deposition on Cemented Carbide and its Performance as a Cutting Tool
p.1
Wear Behavior of Multilayer Nanocomposite TiAlSiN/TiSiN/TiAlN Coated Carbide Cutting Tool during Face Milling of Inconel 718 Superalloy
p.11
Silver and Titanium Nanoparticles Used as Coating on Polyurethane Catheters
p.17
Improvement of Mechanical Properties and Structure Modifications of Low Carbon Steel by Inoculations with Nano-Size Silicon Nitride
p.24
Synthesis and Bioactivity of RGO/TiO2-Noble Metal Nanocomposite Flakes
p.33
Synthesis and Characterization of TiO2 Doped CeO2 Nanopowders by a Hydrothermal Process
p.49
Synthesis and Characterization of YCrxAl1-xO3 Particles by a Reverse Micelle Processing
p.54
Study of the Ball Milling Device for Synthesizing Nanocrystalline Powder
p.60

Wear Behavior of Multilayer Nanocomposite TiAlSiN/TiSiN/TiAlN Coated Carbide Cutting Tool during Face Milling of Inconel 718 Superalloy

Article Preview

Abstract:

The Inconel 718 superalloy is one of the most-used nickel based superalloys in the aerospace industry due to its superior mechanical properties, for instance, high thermal and chemical resistance, and high strength at elevated temperatures. However, the work hardening tendency, low thermal conductivity and high hardness of this superalloy cause early tool wear, leading to the material to be called as a hard-to-cut material. Therefore, deposition of a wear resistant hard coating on carbide cutting tools has a critical importance for longer tool life in milling operations of the Inconel 718 superalloy. In this study, carbide cutting tools were coated with multilayer nanocomposite TiAlSiN/TiSiN/TiAlN coating using the magnetron sputtering technique, and wear behavior of the coated tool was investigated during face milling of the Inconel 718 superalloy under dry conditions. Abrasive and adhesive wear mechanisms were founded as main failure mechanisms. The nanocomposite TiAlSiN/TiSiN/TiAlN coated carbide cutting tool gave better wear resistance, and thus it provided 1.7 times longer tool life and a smoother surface (Ra<0.18 μm) on the Inconel 718 material than the uncoated one.

You might also be interested in these eBooks
Journal of Nano Research Vol. 47 View Preview

Info:

Periodical:

Journal of Nano Research (Volume 47)

Pages:

11-16

DOI:

https://doi.org/10.4028/www.scientific.net/JNanoR.47.11

Citation:

Cite this paper

Online since:

May 2017

Authors:

Bilal Kursuncu, Halil Caliskan, Sevki Yilmaz Guven, Peter Panjan

Keywords:

Face Milling, Inconel 718, Nanocomposite Coating, Tool Wear

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] D. Zhu, X. Zhang, H. Ding, Tool wear characteristics in machining of nickel-based superalloys, International Journal of Machine Tools and Manufacture, 64, 0 (2013) 60-77.

DOI: 10.1016/j.ijmachtools.2012.08.001

Google Scholar

[2] H. Tebassi, M. Yallese, R. Khettabi, S. Belhadi, I. Meddour, F. Girardin, Multi-objective optimization of surface roughness, cutting forces, productivity and Power consumption when turning of Inconel 718, International Journal of Industrial Engineering Computations, 7, 1 (2016).

DOI: 10.5267/j.ijiec.2015.7.003

Google Scholar

[3] T. Sugihara, T. Enomoto, High speed machining of Inconel 718 focusing on tool surface topography of CBN tool, Procedia Manufacturing, 1, (2015) 675-682.

DOI: 10.1016/j.promfg.2015.09.010

Google Scholar

[4] T. Wakabayashi, Y. Maeda, K. Iwatsuka, T. Yazawa, Tool wear characteristics for near-dry cutting of Inconel 718, Key Engineering Materials, 625 (2014) 282-287.

DOI: 10.4028/www.scientific.net/kem.625.282

Google Scholar

[5] İ. Ucun, K. Aslantas, F. Bedir, The performance of DLC-coated and uncoated ultra-fine carbide tools in micromilling of Inconel 718, Precision Engineering, 41 (2015) 135-144.

DOI: 10.1016/j.precisioneng.2015.01.002

Google Scholar

[6] M. Zetek, I. Česáková, V. Švarc, Increasing cutting tool life when machining Inconel 718, Procedia Engineering, 69, 0 (2014) 1115-1124.

DOI: 10.1016/j.proeng.2014.03.099

Google Scholar

[7] N.H. Rafai, M.A. Lajis, N. Hosni, Performance of TiAlN-PVD coated carbide tools in milling AISI D2 hardened steels, World Academy of Science, Engineering and Technology , 77 (2013) 1481-1485.

DOI: 10.4028/www.scientific.net/amm.465-466.1098

Google Scholar

[8] S. Veprek, P. Holubar, M. Veprek-Heijman, Industrial applications of hard and superhard nanocomposite coatings on tools for machining, Forming, Stamping and Injection Molding, Advanced Materials Research, 1135 (2016) 218-233.

DOI: 10.4028/www.scientific.net/amr.1135.218

Google Scholar

[9] H. Çalışkan, A. Karaoğlanlı, Oxidation behavior of AlTiN/TiN nanolayer hard coating at high temperatures, Acta Physica Polonica A, 125, 2 (2014) 456-458.

DOI: 10.12693/aphyspola.125.456

Google Scholar

[10] Y.K. Jeong, M.C. Kang, S.H. Kwon, K.H. Kim, H.G. Kim, J.S. Kim, Tool life of nanocomposite Ti–Al–Si–N coated end-mill by hybrid coating system in high speed machining of hardened AISI D2 steel, Current Applied Physics, 9, 1, Supplement (2009).

DOI: 10.1016/j.cap.2008.08.053

Google Scholar

[11] H. Caliskan, C.C. Celil, P. Panjan, Effect of multilayer nanocomposite TiAlSiN/TiSiN/TiAlN coating on wear behavior of carbide tools in the milling of hardened AISI D2 steel, Journal of Nano Research, 38 (2016) 9-17.

DOI: 10.4028/www.scientific.net/jnanor.38.9

Google Scholar

[12] H. Çalışkan, C. Kurbanoğlu, P. Panjan, M. Čekada, D. Kramar, Wear behavior and cutting performance of nanostructured hard coatings on cemented carbide cutting tools in hard milling, Tribology International, 62, 0 (2013) 215-222.

DOI: 10.1016/j.triboint.2013.02.035

Google Scholar

[13] S. Zhang, J.F. Li, Y.W. Wang, Tool life and cutting forces in end milling Inconel 718 under dry and minimum quantity cooling lubrication cutting conditions, Journal of Cleaner Production, 32, 0 (2012) 81-87.

DOI: 10.1016/j.jclepro.2012.03.014

Google Scholar

[14] D.G. Thakur, B. Ramamoorthy, L. Vijayaraghavan, Study on the machinability characteristics of superalloy Inconel 718 during high speed turning, Materials & Design, 30, 5 (2009) 1718-1725.

DOI: 10.1016/j.matdes.2008.07.011

Google Scholar

[15] A. Bhatt, H. Attia, R. Vargas, V. Thomson, Wear mechanisms of WC coated and uncoated tools in finish turning of Inconel 718, Tribology International, 43, 5–6 (2010) 1113-1121.

DOI: 10.1016/j.triboint.2009.12.053

Google Scholar

[16] H. Li, H. Zeng, X. Chen, An experimental study of tool wear and cutting force variation in the end milling of Inconel 718 with coated carbide inserts, Journal of Materials Processing Technology, 180, 1 (2006) 296-304.

DOI: 10.1016/j.jmatprotec.2006.07.009

Google Scholar

[17] C. Xue, W. Chen, Adhering layer formation and its effect on the wear of coated carbide tools during turning of a nickel-based alloy, Wear, 270, 11–12 (2011) 895-902.

DOI: 10.1016/j.wear.2011.02.018

Google Scholar

[18] A. Devillez, F. Schneider, S. Dominiak, D. Dudzinski, D. Larrouquere, Cutting forces and wear in dry machining of Inconel 718 with coated carbide tools, Wear, 262, 7 (2007) 931-942.

DOI: 10.1016/j.wear.2006.10.009

Google Scholar

[19] K. -H. Park, G. -D. Yang, D. Lee, Tool wear analysis on coated and uncoated carbide tools in inconel machining, International Journal of Precision Engineering and Manufacturing, 16, 7 (2015) 1639-1645.

DOI: 10.1007/s12541-015-0215-x

Google Scholar

Scientific.Net is a registered brand of Trans Tech Publications Ltd
© 2024 by Trans Tech Publications Ltd. All Rights Reserved