Effect of Recycled Particle Size to Micro-Hardness Properties of Styrene Acrylonitrile

Vojtech Senkerik; Michal Stanek; David Manas; Miroslav Maňas; Adam Skrobak; Martin Ovsik

doi:10.4028/www.scientific.net/DDF.368.154

Paper Titles

The Behaviour of Cross-Linking Filled PP to Micro-Indentation Test
p.138

Adhesion Additive Influence on Polyamide Nanopolymer Composite Properties
p.142

Manufacturing and Evaluation of Porous PLA Nano/Micro Fibres
p.146

Tensile Test and Analysis of the Geometry of Kevlar/Epoxy Composites
p.150

Effect of Recycled Particle Size to Micro-Hardness Properties of Styrene Acrylonitrile
p.154

Local Mechanical Properties of SiC - TiNbC Composite and its Constituents
p.158

Micro-Hardness of Irradiated Polyamide
p.162

Indentation Fracture Toughness of Al₂O₃ + GPLs and Si₃N₄ + GPLs Systems
p.166

Mechanical Properties of Metal-Plastic Composite with Internal Fractal Shape Reinforcing Structure
p.170

HomeDefect and Diffusion ForumDefect and Diffusion Forum Vol. 368Effect of Recycled Particle Size to Micro-Hardness...

Effect of Recycled Particle Size to Micro-Hardness Properties of Styrene Acrylonitrile

Abstract:

The aim of this research paper is to study the effect of particle size of recycled material on the micro harness. Valuation of recycled material effect takes place in several mixtures of materials. These mixtures differ in particle size, which are made during grinding of plastic waste, from large particles similar to the original material to dust particles. The recycled material is always the same as is the original material. Tested material is styrene acrylonitrile SAN. Testing is performed at ambient temperature of 23°C. After the first recycling there is a change of hardness; which decrease mostly in mixture with the smallest particles.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Defect and Diffusion Forum (Volume 368)

Pages:

154-157

DOI:

https://doi.org/10.4028/www.scientific.net/DDF.368.154

Citation:

Cite this paper

Online since:

July 2016

Authors:

Vojtech Senkerik*, Michal Stanek, David Manas, Miroslav Maňas, Adam Skrobak, Martin Ovsik

Keywords:

Micro-Hardness, Particle Size, Recycling, SAN, Sieving

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] V. Goodship, Introduction to plastics recycling. 2nd ed. Shawbury, U.K.: Smithers Rapra, 2007, 174 p. ISBN 978-1-84735-078-7.

Google Scholar

[2] F. P. La Mantia. Recycling of plastic materials. Toronto: ChemTec Pub., c1993, vi, 189 p. ISBN 18-951-9803-8.

Google Scholar

[3] M. Ovsik, D. Manas, M. Manas, M. Stanek, P. Kratky, V. Senkerik. Nano-indentation test of PA12 after radiation cross-linking (2014) International Journal of Mechanics, 8 (1), pp.231-238.

DOI: 10.4028/www.scientific.net/kem.699.43

Google Scholar

[4] V. Senkerik, M. Stanek, M. Manas, D. Manas, A. Skrobak, J. Navratil. Comparison of mechanical properties of different particle sizes of recycled polycarbonate at higher temperature (2014) International Journal of Mechanics, 8 (1), pp.268-275.

DOI: 10.4028/www.scientific.net/amm.752-753.304

Google Scholar

[5] A. Calhoun, J. Golmanavich, & J. Ratzlaff. Plastics technician's toolbox,. Brookfield: Society of Plastics Engineers. (2002).

Google Scholar

[6] D. Manas, M. Stanek, M. Manas, V. Pata, J. Javorik, Influence of mechanical properties on wear of heavily stressed rubber parts, KGK – Kautschuk Gummi Kunststoffe, 62. Jahrgang, 2009, pp.240-245.

Google Scholar

[7] D. Bryce. Plastic injection molding: manufacturing process fundamentals. Dearborn, Mich.: Society of Manufacturing Engineers, c1996, xvi, ISBN 08-726-3472-8.

Google Scholar