Study on the Behavior of the Cast-Iron Bonded Grinding Wheel to Machining Properties of Hard and Brittle Materials

S.L. Ma; Wei Li; Cong Rong Zhu; J. Zhang; H.C. Ye

doi:10.4028/www.scientific.net/AMR.24-25.229

Paper Titles

Study on Removal and Embedding Mechanism of CdZnTe Using Loose Abrasive
p.201

Study on Macro/Micro Complex Feed Mechanism in Dry-ECD Assisted Truing and Dressing of Diamond Wheel
p.211

Theory and Experiment Study on the Grinding Force
p.217

Research on Stock Removal Uniformity for Double Sided Polishing Process
p.223

Study on the Behavior of the Cast-Iron Bonded Grinding Wheel to Machining Properties of Hard and Brittle Materials
p.229

Effects of the Wear Characteristics of Brazed Diamond Grits on Grinding Forces
p.233

Experimental Research on Grindability of Aluminum Alloy
p.239

Synthetically Modeling of Thermal Error and Grinding Force Induced Error on a Precision NC Cylindrical Grinding Machine
p.243

Formation and Simulation of Cutting-Direction Burr in Orthogonal Cutting
p.249

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 24-25Study on the Behavior of the Cast-Iron Bonded...

Study on the Behavior of the Cast-Iron Bonded Grinding Wheel to Machining Properties of Hard and Brittle Materials

Abstract:

Tungsten carbide which is a hard and brittle material was ground by cast-iron bonded diamond wheel with ELID (Electrolytic In-Process Dressing) technique, for the purpose of getting high efficiency, super-precision machining. Three kinds of cast-iron bonded diamond wheels with different grain size were adopted to get different grinding efficiency and surface quality of workpieces. The grinding properties of cast-iron bonded grinding wheels with different grain size and the ground surface quality of tungsten carbide are discussed in this paper. The experiment results indicate that, under the same feeding amount, the grinding efficiency of the wheel with bigger grain size is higher, and it could make the dimension accuracy of the workpiece controllable, but the wheel with smaller grain size could get better ground surface quality. The two grinding phases are decided by the ratio between the size of abrasive grain and the thickness of the oxide layer on the grinding wheel.

You might also be interested in these eBooks

Precision Surface Finishing and Deburring Technology

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 24-25)

Pages:

229-232

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.24-25.229

Citation:

Cite this paper

Online since:

September 2007

Authors:

S.L. Ma, Wei Li, Cong Rong Zhu, J. Zhang, H.C. Ye

Keywords:

Cast Iron Bonded Grinding Wheel, Electrolytic In-Process Dressing, Grinding Efficiency, Machining Properties, Surface Quality

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] J.B.J.W. Hegeman, J. Th.M. De Hosson, G. de With: Wear 248 (2001) 187-196.

Google Scholar

[2] Li. Chen, Enxi Wu: Journal of University of Science and Technology Beijing. Volume 13(2006), Number 4, PP 363-367.

Google Scholar

[3] Qingliang Zhao, Dawei Xing: Journal of Harbin Institute of Technology, Vol. 6, No. 3, 1999, PP 22-25.

Google Scholar

[4] Nobuhide Itoh, Hitoshi Ohmori: Journal of Materials Processing Technology 62 (1996) 315-320.

Google Scholar

[5] Y. Dai, H. Ohmori: Key Engineering Materials Vols. 304-305(February 2006), PP: 176-180 V Binder Oxide layer Abrasive grain Wokpiece Ground surface V Oxide layer Abrasive grain Binder Wokpiece Ground surface.

Google Scholar