Determination of Load Performance of Two-Bar Girder Lining to Support the Contour Zone

V.V. Aksenov; Yuri F. Glazkov; Anton A. Kazantsev

doi:10.4028/www.scientific.net/AMM.770.551

Paper Titles

Analysis of Control Problems for 2-D Model of Sound Scattering
p.531

Control Problems for 2-D Electromagnetic Wave Scattering Model
p.535

Study on Neural Networks Usage to Analyse Correlation between Spectrum of Vibration Acceleration Signal from Pin of Ball Mill and its Filling Level
p.540

Research Data of Turbine Nozzles of 5-9 Degree Outlet Angles
p.547

Determination of Load Performance of Two-Bar Girder Lining to Support the Contour Zone
p.551

Efficiency of the Determined Model of Power Consumption by Nonlinear Closed Slow-Response Production
p.561

Numerical Optimization Method of Spacecraft Antenna Retargeting Point Calculations
p.566

Electromagnetic Method for Resonance Tuning of a Mechatronic System
p.572

The Model for Estimate of Cylindrical Machined Surfaces Parameters
p.579

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vol. 770Determination of Load Performance of Two-Bar...

Determination of Load Performance of Two-Bar Girder Lining to Support the Contour Zone

Abstract:

The article proposes a base-line design of the system in the form of lattice girders to support peripheral rock masses of workings. The design scheme and its parameters of support and loading conditions are given, the simulation results are shown.

You might also be interested in these eBooks

Urgent Problems of Up-to-Date Mechanical Engineering

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volume 770)

Pages:

551-560

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.770.551

Citation:

Cite this paper

Online since:

June 2015

Authors:

V.V. Aksenov*, Yuri F. Glazkov, Anton A. Kazantsev

Keywords:

Excavations in the Border Zone, Lattice Girder, Peripheral Rock Mass, Rock, Stress

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] Aksenov V. V. , Blashchuk M. Y. , Dubrovsky M. V. Estimation of torque variation of geohod transmission with hydraulic drive / Applied Mechanics and Materials. - 2013 - Vol. 379. - pp.11-15.

DOI: 10.4028/www.scientific.net/amm.379.11

Google Scholar

[2] Aksenov V. V. , Efremenkov A. B. , Beglyakov V. Y. The influence of relative distance between ledges on the stress-strain state of the rock at a face / Applied Mechanics and Materials. - 2013 - Vol. 379. - pp.16-19.

DOI: 10.4028/www.scientific.net/amm.379.16

Google Scholar

[3] Aksenov V. V. , Khoreshok A. A. , Beglyakov V. Y. Justification of creation of an external propulsor for multipurpose shield-type heading machine – GEO-WALKER / Applied Mechanics and Materials. - 2013 - Vol. 379. - pp.20-23.

DOI: 10.4028/www.scientific.net/amm.379.20

Google Scholar

[4] V.V. Aksenov, A.B. Efremenkov, V. Yu. Beglyakov, M. Yu. Blaschuk, V. Yu. Timofeev, A.V. Sapozhkova. Development of requirements to the geokhod basic systems / Gornoe oborudovanie i elektromekhanika (Mining Machinery and Electrical Engineering) / Moscow 2009– №5. С. 3-7. ( in Russian).

Google Scholar

[5] V.V. Aksenov, A.A. Kazantsev. The reinforcing lining to support the surrounding rock in mine workings – a new approach to the construction of underground structures / The Institute of Coal of the Siberian Branch of RAS: Mining Informational and analytical Bulletin (scientific and technical journal). – 2013. - № ОВ6. – pp.411-419.

Google Scholar

[6] Revuzhenko A.F., Kazantsev A.A., Glazkov Y.F., Dortman A.A. Influence of the longitudinal excavations layout on stress concentration value in the peripheral rock mass / Applied Mechanics and Materials Vol. 682 (2014) pp.196-201.

DOI: 10.4028/www.scientific.net/amm.682.196

Google Scholar

[7] Dimitrios Kolymbas. Tunneling and Tunnel Mechanics A Rational Approach to Tunnelling / Springer-Verlag Berlin Heidelberg 2005, 431 p. ISBN-13 978-3-540-25196-5 Springer Berlin Heidelberg New York.

DOI: 10.1007/s11440-006-0007-7

Google Scholar

[8] Bernhard Maidl, Markus Thewes, Ulrich Maidl. Handbook of tunnel engineering. Volume I: Structures and Methods © 2013 Wilhelm Ernst & Sohn, Verlag für Architektur und technische Wissenschaften GmbH & Co. KG, Rotherstraße 21, 10245 Berlin, Germany ISBN: 978-3-433-03048-6.

DOI: 10.1002/9783433603499

Google Scholar

[9] G.S. Pisarenko. Handbook on Strength of Material/ G.S. Pisarenko, AP Yakovlev, V.V. Matveev. - Kiev: Naukova. Dumka 1988. – 737 p. ( in Russian).

Google Scholar

[10] G.G. Litvinsky, Steel frame supports in mining workings/ G. G, Litvinsky, G.I. Gaiko, M.I. Kuldirkaev - Kiev: Tekhnika (Equipment), 1999. – 216 p. ( in Russain).

Google Scholar