[1]
Susan Bernal, Ruby De Gutierrez, Silvio Delvasto and Erich Rodriguez. (2010). Performance of an Alkali-Activated Slag Concrete Reinforced with Steel Fibers. Journal of Construction and Building Materials. 24: p.208–214.
DOI: 10.1016/j.conbuildmat.2007.10.027
Google Scholar
[2]
Min Sik Kim, Yubin Jun, Changha Lee and Jae Eun Oh. (2013). Use of CaO as An Activator for Producing a Price Competitive Non-Cement structural Binder Using Ground Granulated Blast Furnace Slag. Journal Cement and Concrete Research. 54: pp.208-214.
DOI: 10.1016/j.cemconres.2013.09.011
Google Scholar
[3]
Mohamed Heikal ,S. Abd El Aleem, W.M. Morsi. (2013). Characteristics of Blended Cements Containing Nano-Silica. Housing and Building National Research Center Journal. 9: p.243–255.
DOI: 10.1016/j.hbrcj.2013.09.001
Google Scholar
[4]
Tongsheng Zhang, Qijun Yu, Jiangxiong Wei and Pingping Zhang. (2012). Efficient Utilization of Cementitious Materials to Produce Sustainable Blended Cement. Journal of Cement and Concrete Composites. 34: p.692–699.
DOI: 10.1016/j.cemconcomp.2012.02.004
Google Scholar
[5]
Hyunjung Kim and Yooteak Kim. (2012). Characteristics of the Geopolymer using Fly Ash and Blast Furnace Slag with Alkaline Activators. 4th International Conference on Chemical, Biological and Environmental Engineering. Korea.
Google Scholar
[6]
Y. Moruf Olalekan, M.J. Megat Azmi, A. Zainal Arifin and M. Maslehuddin. (2014). Evolution of Alkaline Activated Ground Blast Furnace Slag–Ultrafine Palm Oil Fuel Ash Based Concrete. Journal of Materials and Design. 55: p.387–393.
DOI: 10.1016/j.matdes.2013.09.047
Google Scholar
[7]
Adam, A. A. (2009). Strength and Durability Properties of Alkali Activated Slag and Fly Ash Based Geopolymer Concrete. Civil, Environmental and Chemical Engineering. Melbourne, RMIT University. Doctor of Philosophy Thesis: pp.23-140.
Google Scholar
[8]
Chao Li, Henghu Sun and Longtu Li. (2010). A Review: The Comparison between Alkali-Activated Slag (Si+Ca) and Metakaolin (Si+Al) Cements. Journal of Cement and Concrete Research. 40: p.1341–1349.
DOI: 10.1016/j.cemconres.2010.03.020
Google Scholar
[9]
S. Kourounis, S. Tsivilis, P.E. Tsakiridis, G.D. Papadimitriou, Z. Tsibouki. (2007). Properties and Hydration of Blended Cements with Steelmaking Slag. Journal of Cement and Concrete Research. 37: pp.815-822.
DOI: 10.1016/j.cemconres.2007.03.008
Google Scholar
[10]
F. Pacheco-Torgal, Z. Abdollahnejad, A.F. Camoes, M. Jamshidi and Y. Ding. (2012).
Google Scholar
[11]
G. S. Manjunath, Radhakrishna, C. Giridhar and Mahesh Jadhav. (2011). Compressive Strength Development in Ambient Cured Geo-Polymer Mortar. International Journal of Earth Sciences and Engineering. 4: pp.830-834.
Google Scholar
[12]
A.R. Sakulich. (2009). Characterization of Environmentally-Friendly Alkali Activated Slag Cements and Ancient Building Materials. Drexel University. Doctor of Philosophy Thesis: pp.4-6.
DOI: 10.17918/etd-3209
Google Scholar
[13]
F. Pacheco-Torgal, J. Castro-Gomes and Said Jalali. (2008).
Google Scholar
[14]
D.M. Roy, G.M. Idorn, ACI J Nov-Dec (1982) 444–457.
Google Scholar
[15]
P.M. Gifford, J.E. Gillott, Can J Civ Eng 24 (1997) 237–249.
Google Scholar
[16]
X.C. Pu, C.C. Gan, S.D. Wang, C.H. Yang, Summary Reports of Research on Alkali-Activated Slag Cement and Concrete, Volumes 1–6, Chongqing Institute of Architecture and Engineering, Chongqing, (1988).
Google Scholar
[17]
V.D. Glukhovsky, Slag-Alkali Concretes Produced from Fine-Grained Aggregate, Vishcha Shkola, Kiev, Russia, 1981 (in Russian).
Google Scholar