[1]
B. Podgornik, J. Viintin, O. Wänstrand, M. Larsson, S. Hogmark, H. Ronkainen, and K. Holmberg, Tribological properties of plasma nitrided and hard coated AISI 4140 steel, Wear, Vol. 249; pp.254-259, (2001).
DOI: 10.1016/s0043-1648(01)00564-6
Google Scholar
[2]
M. Torres, and H. Voorwald, An evaluation of shot peening, residual stress and stress relaxation on the fatigue life of AISI 4340 steel, International Journal of Fatigue, Vol. 24; pp.877-886, (2002).
DOI: 10.1016/s0142-1123(01)00205-5
Google Scholar
[3]
D. Novovic, R. Dewes, D. Aspinwall, W. Voice, and P. Bowen, The effect of machined topology and integrity on fatigue life, International Journal of machine Tools & Manufacture, Vol. 44; pp.125-134, (2004).
DOI: 10.1016/j.ijmachtools.2003.10.018
Google Scholar
[4]
S. Mahagaonkar, P. Brahmankar, and C. Seemikeri, Effect on fatigue performance of shot peened components: An analysis using DOE technique, International Journal of Fatigue, Vol. 31; pp.693-702, (2009).
DOI: 10.1016/j.ijfatigue.2008.03.020
Google Scholar
[5]
T. Bell, ASM Handbook, vol. 4, Heat Treating, ASM International, Ohio, p.425–436, (1997).
Google Scholar
[6]
ASM Metals Handbook, vol. 4, Heat Treating, ninth ed., American Society for Metals, Metals Park, OH, (1991).
Google Scholar
[7]
D. Pye, Practical Nitriding and Ferritic Nitrocarburizing, ASM International, (2003).
Google Scholar
[8]
William L. Roberts, Cold Rolling of Steel, CRC Press, US, (1978).
Google Scholar
[9]
K.J. e. Marsh, Shot Peening: Techniques and Applications, Chamelion Press Ltd, (1993).
Google Scholar
[10]
A. Ezeilo, in: M.E. Fitzpatrick, A. Lodini (Eds. ), Analysis of Residual Stress by Diffraction using Neutron and Synchrotron Radiation, Taylor and Francis, London, p.251–262, (2003).
DOI: 10.1201/9780203608999
Google Scholar
[11]
G.A. Webster, A.N. Ezeilo, Residual stress and their influence on fatigue lifetimes, International Journal of Fatigue, Vol. 23; pp. S375– S383, (2001).
DOI: 10.1016/s0142-1123(01)00133-5
Google Scholar
[12]
G.A. Webster, A.N. Ezeilo, Physica B 234 (1997) 949–955.
Google Scholar
[13]
G. H. Farrahi, H. Ghadbeigi, An investigation into the effect of various surface treatments on fatigue life of a tool steel, Journal of Materials Processing Technology, Vol. 174, pp.318-324, (2006).
DOI: 10.1016/j.jmatprotec.2006.01.014
Google Scholar
[14]
Yazdania, S., Yoozbashi, N., Ebrahimi, A. Enhancement of Fatigue Strength of SAE 1045 Steel by Tempering Treatment and Shot Peening, Trans tech Publications, Switzerland. (2007).
Google Scholar
[15]
Shen S., Z. Han, C. Herrera, and S. Atluri. Assessment, development and validation of computational fracture mechanics methodologies and tools for shot-peened materials used in rotorcraft principal structural elements , National technical information service (NTIS), US, (2004).
Google Scholar
[16]
Lillamand I et al. Cyclic modelling of the mechanical state produced by shotpeening. Fatigue Fract Eng Mater Struct, Vol. 24; p.93–104, (2001).
Google Scholar
[17]
Guechichi H, Castex L. Fatigue limits prediction of surface treated materials. J Mater Proc Technol; 172: 381–7, (2006).
DOI: 10.1016/j.jmatprotec.2005.10.010
Google Scholar
[18]
T.F. Roger, Finite Element Methods for Engineers, Imperical College Press, (1997).
Google Scholar
[19]
J. Morrow, Fatigue Design Handbook, Advances in Engineering, Society of Automotive Engineers, Warrendale, Pa., Vol. 4, 1968, pp.3-36.
Google Scholar
[20]
K.N., Smith, P. Watson and T. H. Topper, A stress-strain function for the fatigue of metals, Journal of Materials, Vol. 4, No. 5, pp.767-778, (1970).
Google Scholar