The Research on the Disperse Form of PEO Fiber by Electrostatic Spinning Method

Ting Lou; Yan Bo Wu; Tie Ben Song

doi:10.4028/www.scientific.net/AMR.601.110

Paper Titles

Study of Magnetism of Two-Dimensional Ferromagnetic Graphene
p.89

Effect of UV Irradiation on the Migration of DEHP from Food-Grade PVC Film into Packaged Ground Meat
p.94

Research on the Porosity and Pore Size of Spun-Bonded Fabrics Based on Matlab7.0 Image Processing Technology
p.99

Machining FEM Model of Unidirectional Carbon Fiber Reinforced Laminate
p.105

The Research on the Disperse Form of PEO Fiber by Electrostatic Spinning Method
p.110

The Dynamic Behaviors and Structure Conservation of Protein BMP-2 on Hydroxyapatite Nano Surfaces
p.115

The Hydraulic Characteristics of Slope Flow
p.123

Evaluation of Tobacco Mixing Uniformity Based on Projection Pursuit
p.128

Reasonably Water Injection Time about Abnormal Pressure of Low Permeability Reservoir
p.134

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 601The Research on the Disperse Form of PEO Fiber by...

The Research on the Disperse Form of PEO Fiber by Electrostatic Spinning Method

Abstract:

We prepared PEO nano fiber with different concentration of PEO acid solution by electrostatic spinning in different technology conditions. Then we studied the property of solution by rotary viscometer instrument and electrical conductivity spectrometer, the disperse form of the fiber by SEM scattered forms, the thermal property of the composite was studied by thermogravimetry and derivative thermogravimetry (TG-DTA). The conclusion is the disperse form of fiber is controlled by the concentration of solution, the voltage of spinning, the distance of solidification. The important factor is about the solution. To increase the solution viscosity and the solidification distance, reduce the spinning voltage would decrease the diameter of the fiber. Thermal stability of fiber was significantly better than powder.