The Formation of C-S Coatings by Electrospark Alloying with the Use Special Process Media

[1] Vl. Martsynkovskyy, V. Tarelnyk, Vs. Martsynkovskyy, Ie. Konoplianchenko, A. Zhukov, P. Kurp, P. Furmańczyk, N. Tarelnyk, Effect of Running Coatings on Tribological Properties of Strangthened Steel Surfaces, «Electromachinihg-18»: American Institute of Physics Conf. Proceedings. 2017 (2018) 020017-1-020017-12.

DOI: 10.1063/1.5056280

Google Scholar

[2] V. Tarelnyk, I. Konoplianchenko, V. Martsynkovskyy, A. Zhukov, P. Kurp, Comparative Tribological Tests for Face Impulse Seals Sliding Surfaces Formed by Various Methods, Advances in Design, Simulation and Manufacturing. DSMIE-2018. Lecture Notes in Mechanical Engineering: monograph. / edited by V. Ivanov et al. Cham: Springer, 2019, рр. 382–391.

DOI: 10.1007/978-3-319-93587-4_40

Google Scholar

[3] T. Kresan, S. Pylypaka, T. Volina, I. Rybenko, O. Tatsenko, Non-Circular Wheels from a Congruent Arcs, in: V. Tonkonogyi, V. Ivanov, J. Trojanowska, G. Oborskyi, I. Pavlenko, (Eds), Advanced Manufacturing Processes IV. Inter Partner 2022. Lecture Notes in Mechanical Engineering, Springer, Cham, 2023, p.44–53.

DOI: 10.1007/978-3-031-16651-8_5

Google Scholar

[4] T. Volina, S. Pylypaka, V. Babka, O. Zalevska, A. Rebrii, Sliding of a Particle on the Horizontal Plane, which Combines Oscillating and Rotary Movements, in: V. Tonkonogyi, V. Ivanov, J. Trojanowska, G. Oborskyi, I. Pavlenko, (Eds) Advanced Manufacturing Processes IV. Inter Partner 2022. Lecture Notes in Mechanical Engineering, Springer, Cham, 2023, p.506–514.

DOI: 10.1007/978-3-031-16651-8_48

Google Scholar

[5] S. Pylypaka, T. Volina, I. Hryshchenko, S. Dieniezhnikov, I. Rybenko, Mathematical Model of Lifting Particles of Technological Material by Vertical Auger, in: V. Ivanov, I. Pavlenko, O. Liaposhchenko, J. Machado, M. Edl (Eds), Advances in Design, Simulation and Manufacturing V. DSMIE 2022. Lecture Notes in Mechanical Engineering, Springer, Cham, 2022, p.112–122.

DOI: 10.1007/978-3-031-06044-1_11

Google Scholar

[6] V.B. Tarel'nik, V.S. Martsinkovskii, A.N. Zhukov, Increase in the Reliability and Durability of Metal Impulse Seals. Part 2, Chemical Petroleum Engineering. 53 (3–4) (2017) 266–272.

DOI: 10.1007/s10556-017-0333-7

Google Scholar

[7] V.B. Tarel'nik, V.S. Martsinkovskii, A.N. Zhukov, Increase in the Reliability and Durability of Metal Impulse Seals. Part 3., Chemical Petroleum Engineering. 53 (5–6) (2017) 385–389.

DOI: 10.1007/s10556-017-0351-5

Google Scholar

[8] O.P. Umanskyi, M.S. Storozhenko, V.B. Tarelnyk, O.Y. Koval, Y.V. Gubin, N.V. Tarelnyk, T.V. Kurinna, Electrospark Deposition of FeNicrBSic-MeB2 Coatings on Steel, Powder Metallurgy and Metal Ceramics. 59 (2020) 57–67.

DOI: 10.1007/s11106-020-00138-5

Google Scholar

[9] V.B. Tarelnyk, O.P. Gaponova, V.B. Loboda, E.V. Konoplyanchenko, V.S. Martsinkovskii, Y.I. Semirnenko, N.V. Tarelnyk, M.A. Mikulina, B.A. Sarzhanov, Improving Ecological Safety when Forming Wear-Resistant Coatings on the Surfaces of Rotation Body Parts of 12Kh18N10T Steel Using a Combined Technology Based on Electrospark Alloying, Surface Engineering and Applied Electrochemistry. 57 (2021) 173–184.

DOI: 10.3103/s1068375521020113

Google Scholar

[10] O.P. Gaponova, V. Tarelnyk, V. Martsynkovskyy, Ie. Konoplianchenko, V. Melnyk, V. Vlasovets, O. Sarzhanov, N. Tarelnyk, M. Mikulina, A. Polyvanyi, G. Kirik, A. Batalova, Combined electrospark running-in coatings of bronze parts. Part 1. Structure and mechanical properties, Metallofizika i Noveishie Tekhnologii. 43 (2021) 1121–1138.

DOI: 10.1109/nap51885.2021.9568632

Google Scholar

[11] T.V. Mosina, Electrospark Doping for the Composite Material of Both TiN – AlN and TiN – AlN – (Ni – Cr) Systems as the Method of Wear-Resistant Coating Application, Novye Ogneupory (New Refractories). 9 (2013) 61–64.

DOI: 10.1007/s11148-014-9616-0

Google Scholar

[12] A. Zahorulko, C. Kundera, S. Hudkov, Determination of mechanical characteristics of stuffing box packings, IOP Conference Series: Materials Science and Engineering. 233 (2017) 012039.

DOI: 10.1088/1757-899x/233/1/012039

Google Scholar

[13] I.P. Shatskyi, V.V. Perepichka, L.Ya. Ropyak, On the Influence of Facing on Strength of Solids with Surface Defects, Metallofiz. Noveishie Tekhnol. 42 (2020) 69–76.

Google Scholar

[14] M.S. Storozhenko, A.P. Umanskii, A.E. Terentiev, I.M. Zakiev, Effect of the Structure of TiB2–(Fe–Mo) Plasma Coatings on Mechanical and Tribotechnical Properties, Powder metallurgy and Metal Ceramics. 56 (2017) 60–69.

DOI: 10.1007/s11106-017-9872-x

Google Scholar

[15] O. Umanskyi, M. Storozhenko, G. Baglyuk, O. Melnyk, V. Brazhevsky, O. Chernyshov, O. Terentiev, Yu. Gubin, O Kostenko, I. Martsenyuk. Structure and Wear Resistance of Plasma-Sprayed NiCrBSiC–TiCrC Composite Powder Coatings, Powder Metallurgy and Metal Ceramics. 59 (2020) 434–444.

DOI: 10.1007/s11106-020-00177-y

Google Scholar

[16] M. Bembenek, P. Prysyazhnyuk, T. Shihab, R. Machnik, O. Ivanov, L. Ropyak, Microstructure and Wear Characterization of the Fe-Mo-B-C—Based Hardfacing Alloys Deposited by Flux-Cored Arc Welding, Materials. 15 (2022) 5074.

DOI: 10.3390/ma15145074

Google Scholar

[17] B.O. Trembach, M.G. Sukov, V.A. Vynar, I.O. Trembach, V.V. Subbotina, O.Yu. Rebrov, O.M. Rebrova, and V.I. Zakiev, Effect of Incomplete Replacement of Cr for Cu in the Deposited Alloy of Fe–C–Cr–B–Ti Alloying System with a Medium Boron Content (0.5% wt.) on its Corrosion Resistance, Metallofizika i Noveishie Tekhnologii. 44 (2022) 493.

DOI: 10.31891/2079-1372-2022-105-3-34-40

Google Scholar

[18] L. Ropyak, I. Schuliar, O. Bohachenko, Influence of Technological Parameters of Centrifugal Reinforcement upon Quality Indicators of Parts, Eastern-European Journal of Enterprise Technologies. 1 (2016) 53–62.

DOI: 10.15587/1729-4061.2016.59850

Google Scholar

[19] I. Ivasenko, V. Posuvailo, H. Veselivska, V. Vynar, Porosity Segmentation and Analysis of Oxide Ceramic Coatings of D16T Alloy, International Scientific and Technical Conference on Computer Sciences and Information Technologies. 2 (2020) 9321900.

DOI: 10.1109/csit49958.2020.9321900

Google Scholar

[20] M. Bembenek, M. Makoviichuk, I. Shatskyi, L. Ropyak, I. Pritula, L. Gryn, and V. Belyakovskyi, Optical and Mechanical Properties of Layered Infrared Interference Filters, Sensors. 22 (2022) 8105.

DOI: 10.3390/s22218105

Google Scholar

[21] O. Bazaluk, O. Dubei, L. Ropyak, M. Shovkoplias, T. Pryhorovska, V. Lozynskyi, Strategy of Compatible Use of Jet and Plunger Pump with Chrome Parts in Oil Well, Energies. 15 (2022) 83.

DOI: 10.3390/en15010083

Google Scholar

[22] F.A. P. Fernandes, S.C. Heck, R.G. Pereira, A. Lombardi-Neto, Wear of plasma nitrided and nitrocarburized AISI 316L austenitic stainless steel, Journal of Achievements in Materials and Manufacturing Engineering. 40 (2010) 175.

Google Scholar

[23] Shu-Hung Yeh, Liu-Ho Chiu, Heng Chang, Engineering, Effects of Gas Nitriding on the Mechanical and Corrosion Properties of SACM 645 Steel, Scientific Research Publishing. 9 (2011) 942.

DOI: 10.4236/eng.2011.39116

Google Scholar

[24] S. Ben Slima, Ion and Gas Nitriding Applied to Steel Tool for Hot Work X38CrMoV5 Nitriding Type: Impact on the Wear Resistance, Materials Sciences and Applications. 9 (2012) 640.

DOI: 10.4236/msa.2012.39093

Google Scholar

[25] V. I. Kuzmin, A. A. Mikhal'chenko, O. B. Kovalev, E. V. Kartaev, The technique of Formation of the Axisymmetric Heterogeneous Flow for Thermal Spraying of Powder Materials, J. of Thermal Spray Technology. 21 (2012) 159–168.

DOI: 10.1007/s11666-011-9701-6

Google Scholar

[26] A.D. Pogrebnjak, V.I. Ivashchenko, P.L Skrynskyy, O.V. Bondar, P. Konarski, K. Zaleski, S. Jurga, E. Coy, Experimental and theoretical studies of the physicochemical and mechanical properties of multi-layered TiN/SiC films: Temperature effects on the nanocomposite structure, Composites Part B-Engineering. 142 (2018) 85–94.

DOI: 10.1016/j.compositesb.2018.01.004

Google Scholar

[27] A.D. Pogrebnjak, A.A. Bagdasaryan, P. Horodek, V. Tarelnyk, V.V. Buranich, H. Amekura, N. Okubo, N. Ishikawa, V.M. Beresnev, Positron Annihilation Studies of Defect Structure of (TiZrHfNbV)N Nitride Coatings under Xe14+ 200 MeV Ion Irradiation, Materials Letters. 303 (2021) 130548.

DOI: 10.1016/j.matlet.2021.130548

Google Scholar

[28] G. Morand, P. Chevallier, L. Bonilla-Gameros, S. Turgeon, M Cloutier, M. Da Silva Pires, A. Sarkissian, M. Tatoulian, L Houssiau, D. Mantovani, On the Adhesion of Diamond-Like Carbon Coatings Deposited by Low-Pressure Plasma on 316L Stainless Steel, Surface and Interface Analysis. 53 (2021) 658–671.

DOI: 10.1002/sia.6953

Google Scholar

[29] G. Maistro, S. Kante, L. Nyborg, Y. Cao, Low-temperature Carburized High-Alloyed Austenitic Stainless Steels in PEMFC Cathodic Environment, Surfaces and Interfaces. 24 (2021) 101093.

DOI: 10.1016/j.surfin.2021.101093

Google Scholar

[30] V.G. Smelov, A.V. Sotov, S.A. Kosirev, Development of process optimization technology for laser cladding of GTE compressor blades, ARPN Journal of Engineering and Applied Sciences. 9 (2014) 1854.

Google Scholar

[31] B. Antoszewski, S. Tofil1, M. Scendo, W. Tarelnik, Utilization of the UV laser with picosecond pulses for the formation of surface microstructures on elastomeric plastics, Published under licence by IOP Publishing Ltd, IOP Conf. Ser.: Mater. Sci. 233 (2017) 012036.

DOI: 10.1088/1757-899x/233/1/012036

Google Scholar

[32] I. Pliszka, N. Radek, Corrosion Resistance of WC-Cu Coatings Produced by Electrospark Deposition, Procedia Engineering. 192 (2017) 707–712.

DOI: 10.1016/j.proeng.2017.06.122

Google Scholar

[33] B. Tarelnyk, O. P. Gaponova, Ye. V. Konoplyanchenko, N. S. Yevtushenko, V. O. Herasymenko, The Analysis of a Structural State of Surface Layer after Electroerosive Alloying. II. Features of Formation of Electroerosive Coatings on Special Steels and Alloys by Hard Wear-Resistant and Soft Antifriction Materials, Metallofiz. Noveishie Tekhnol. 40 (2018) 795–815.

DOI: 10.15407/mfint.40.06.0795

Google Scholar

[34] V.B. Tarelnyk, E.V. Konoplyanchenko, O.P. Gaponova, N.V. Tarelnyk Ensuring the Protection of the Surfaces of End Pulse Seals of Turbomachines by Forming Wear-Resistant Nanostructures. Monograph / in: V.B. Tarelnyk, University Book, Sumy, 2022, р. 252.

DOI: 10.1109/nap55339.2022.9934739

Google Scholar

[35] V.B. Tarelnyk, Control of the Quality of Surface Layers of Parts by Combined Electroerosion Alloying. Monograph, McDan, Sumy, 2002, 323 p.

Google Scholar

[36] V.B. Tarelnyk, A.V. Paustovskii, Y.G. Tkachenko, E. V. Konoplianchenko, V. S. Martsynkovskyi, B. Antoszewski, Electrode Materials for Composite and Multilayer Electrospark-Deposited Coatings from Ni–Cr and WC–Co Alloys and Metals, Powder Metall Met Ceram. 55 (2017) 585–595.

DOI: 10.1007/s11106-017-9843-2

Google Scholar

[37] V. Martsynkovskyy, V. Tarelnyk, I. Konoplianchenko, O. Gaponova, M. Dumanchuk, Technology Support for Protecting Contacting Surfaces of Half-Coupling—Shaft Press Joints Against Fretting Wear. in: V. Tonkonogyi, V. Ivanov, J. Trojanowska, G. Oborskyi, I. Pavlenko, I. (Eds) Advances in Design, Simulation and Manufacturing II. DSMIE 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. (2019) 216–225.

DOI: 10.1007/978-3-030-22365-6_22

Google Scholar

[38] V.B. Tarel'nik, A.V. Paustovskii, Y.G. Tkachenko, V.S. Martsinkovskii, E.V. Konoplyanchenko, K. Antoshevskii, Electric-spark Coatings on a Steel Base and Contact Surface for Optimizing the Working Characteristics of Babbitt Friction Bearings, Surface Engineering and Applied Electrochemistry. 53 (2017) 285–294.

DOI: 10.3103/s1068375517030140

Google Scholar

[39] V.B. Tarel'nik, E.V. Konoplyanchenko, P.V. Kosenko, V.S. Martsinkovskii, Problems and Solutions in Renovation of the Rotors of Screw Compressors by Combined Technologies, Chemical and Petroleum Engineering. 53 (2017) 540–546.

DOI: 10.1007/s10556-017-0378-7

Google Scholar

[40] V. Martsinkovsky, V. Yurko, V. Tarelnik, Yu. Filonenko, Designing Thrust Sliding Bearings of High Bearing Capacity, Procedia Engineering. 39 (2012) 148156.

DOI: 10.1016/j.proeng.2012.07.019

Google Scholar

[41] V. Martsinkovsky, V. Yurko, V. Tarelnik, Yu. Filonenko, Designing Radial Sliding Bearing Equipped with Hydrostatically Suspended Pads, Procedia Engineering. 39 (2012) 157–167.

DOI: 10.1016/j.proeng.2012.07.020

Google Scholar

[42] V. Tarelnyk, O. Gaponova, G Kirik., Ye. Konoplianchenko, N. Tarelnyk, M. Mikulina, Cementation of steel details by electrospark alloying, Metallofizika i Noveishie Tekhnologii. 42 2020. 655–667.

DOI: 10.15407/mfint.42.05.0655

Google Scholar

[43] B. Antoszewski, O.P. Gaponova, V.B. Tarelnyk, O.M. Myslyvchenko, P. Kurp, T.I. Zhylenko, I. Konoplianchenko, Assessment of Technological Capabilities for Forming Al-C-B System Coatings on Steel Surfaces by Electrospark Alloying Method. Materials. 14 (2021) 739.

DOI: 10.3390/ma14040739

Google Scholar

[44] V. Tarelnyk, V. Martsynkovskyy, O. Gaponova, I. Konoplianchenko, A. Belous, V. Gerasimenko, M. Zakharov, New method for strengthening surfaces of heat treated steel parts, IOP Conference Series: Materials Science and Engineering. 233 (2017) 012048.

DOI: 10.1088/1757-899x/233/1/012048

Google Scholar

[45] O. Gaponova, Cz. Kundera, G. Kirik, V. Tarelnyk, V. Martsynkovskyy, Ie. Konoplianchenko, M. Dovzhyk, A. Belous, O. Vasilenko, Estimating Qualitative Parameters of Aluminized Coating Obtained by Electric Spark Alloying Method. in: A. Pogrebnjak, V. Novosad (Eds), Advances in Thin Films, Nanostructured Materials, and Coatings. Lecture Notes in Mechanical Engineering. Singapore, Springer. (2019) 249–266.

DOI: 10.1007/978-981-13-6133-3_25

Google Scholar

[46] O.P. Gaponova, V. Tarelnyk, V. Martsynkovskyy, Ie. Konoplianchenko, V. Melnyk, V. Vlasovets, O. Sarzhanov, N. Tarelnyk, M. Mikulina, A. Polyvanyi, G. Kirik, A. Batalova, Combined Electrospark Running-in Coatings of Bronze Parts. Part 1. Structureand Mechanical Pproperties, Metallofizika i Noveishie Tekhnologii. 43 (2021) 1121–1138.

DOI: 10.1109/nap51885.2021.9568632

Google Scholar

[47] V. Tareknyk, V. Martsynkovskyy, A. Bilous, O. Zukov, O. Gaponova, Ie. Konoplianchenko, Patent of Ukraine for the invention № 117867, МPК (2018.01) B23H 1/00, B23H 9/02 (2006.01), C23C 8/64 (2006.01), B23H 5/02 (2006.01), C23C 8/66 The method of sulfocemation of the surface steel part, Publ. 10.10.2018, bul. no 19.

Google Scholar