A Study on Heat Generation Control of a Precision Ball Screw Drive System

Zhe Zhu Xu; Xiao Jing Liu; In Bum Lee; In Shup Ahn; Sung Ki Lyu

doi:10.4028/www.scientific.net/AMR.680.360

Paper Titles

Comparison of Infrared Image Pre-Processing Technique on Electronic Power Equipment
p.339

3D MRO Job Card Publishing Method for Aircraft
p.345

Research on the Reasonable Air Velocity of Blast Furnace Tuyere
p.351

Study on Paper Electromagnetic Drying Rate
p.356

A Study on Heat Generation Control of a Precision Ball Screw Drive System
p.360

Fatigue Life Analysis of Lifting Mechanism Rod Based on Virtual Prototyping and FEM
p.364

Comparsion of Machining Stability of Up and Down Milling
p.369

Design and Simulation for Key Components of Robotic Flower-Seedling Transplanter
p.387

Elastic Rod Based Carpet Loop Pile Trajectory Simulation
p.392

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 680A Study on Heat Generation Control of a Precision...

A Study on Heat Generation Control of a Precision Ball Screw Drive System

Abstract:

In this paper, a novel/well designed high speed/high precision nut air cooling ball screw system was developed to avoid thermal errors which affect the positioning accuracy and the temperature rise of ball screw. In order to discuss the effectiveness of the developed high speed/high precision nut air cooling ball screw system, a series of tests was done. As the results, it shows that the positioning accuracy will significantly improve with the use of the nut air cooling ball screw drive system shown in this paper.

You might also be interested in these eBooks

Contemporary Solutions in Applied Materials and Industry

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 680)

Pages:

360-363

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.680.360

Citation:

Cite this paper

Online since:

April 2013

Authors:

Zhe Zhu Xu, Xiao Jing Liu, In Bum Lee, In Shup Ahn, Sung Ki Lyu

Keywords:

Ball Screw, Heat Generation Control, Nut Cooling, Precision Positioning, Screw Cooling

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] Z. Z. Xu, X. J. Liu, H.K. Kim, J.H. Shin and S.K. Lyu, Thermal error forecast and performance evaluation for and air-cooling ball screw system, Int. J. Mach. Tools Manufact. Vol. 51 (2011), pp.605-611.

DOI: 10.1016/j.ijmachtools.2011.04.001

Google Scholar

[2] Z. Z. Xu, X. J. Liu, C. H. Choi and S.K. Lyu, A study on improvement of ball screw system positioning error with liquid-cooling, Int. J. Precis. Eng. Manuf., Vol. 13, No. 12 (2012), pp.2173-2181.

DOI: 10.1007/s12541-012-0288-8

Google Scholar