Effect of Interfaces on Mechanical Properties of Ceramic/Metal Multilayers

[1] B. Major, W. Mróz, M. Jelinek, R. Kosydar, M. Kot, Ł. Major, S. Burdyńska, R. Kustosz:  Bulletin of the Polish Academy of Sciences: Technical Sciences Vol. 54 (2006), p.181

Google Scholar

[2] R. Hauert: Tribology International Vol. 37 (2004), p.991

Google Scholar

[3] A. Leyland, A. Matthews: Wear Vol. 246 (2000), p.1

Google Scholar

[4] A.A. Voevodin, J.S. Zabinski, C. Muratore: Tsinghua Science and Technology Vol. 10 (2005), 665

Google Scholar

[5] J.X. Liao, L.F. Xia, M.R. Sun, W.M Liu., T. Xu, Q.J. Xue: Surface and Coatings Technology Vol. 183 (2004), p.157

Google Scholar

[6] M. Kot, T. Moskalewicz, B. Wendler, W. Rakowski, A. Czyrska-Filemonowicz: Solid State Phenomena Vol. 177 (2011), p.36

DOI: 10.4028/www.scientific.net/ssp.177.36

Google Scholar

[7] S. Zimowski, T. Moskalewicz, M. Kot, B. Wendler, A. Czyrska-Filemonowicz: Surface and Interface Analysis Vol. 44 (2012), p.1225

Google Scholar

[8] G. Abadias, A. Michel, C. Tromas, C. Jaouen, S.N. Dub: Surface and Coatings Technology Vol. 202 (2007), p.844

DOI: 10.1016/j.surfcoat.2007.05.068

Google Scholar

[9] P.C. Yashar, W.D. Sproul: Vacuum Vol. 55 (1999), p.179

Google Scholar

[10] S.H. Kim, Y.J. Baik, D. Kwon: Surface and Coatings Technology Vol. 187 (2004), p.47

Google Scholar

[11] X.M. Xu, J. Wang, J. An, Y. Zhao, Q.Y. Zhang: Surface and Coatings Technology Vol. 201 (2007), p.5582

Google Scholar

[12] M. Kot, Ł. Major, J. Lackner, W. Rakowski: Journal of Balkan Tribological Association Vol. 18 (2012), p.92

Google Scholar

[13] J. Markus Lackner, L. Major, M. Kot: Biulletin of Polish Academy of Sciences. Technical Sciences Vol. 59/3 (2011), p.343

Google Scholar

[14] Ł. Major, J. Morgiel, J. M. Lackner, M. J. Szczerba, M. Kot, B. Major: Advanced Engineering Materials Vol. 10 (2008), p.617

DOI: 10.1002/adem.200800054

Google Scholar

[15] M. Kot, W. Rakowski, B. Major, Ł. Major, J. Morgiel: Surface and Coatings Technology Vol. 202 (2008) p.3501

DOI: 10.1016/j.surfcoat.2007.12.036

Google Scholar

[16] J. Romero, J. Esteve, A. Lousa: Surface and Coatings Technology Vol.188-189 (2004), p.338

Google Scholar

[17] J.D. Embury, J.P. Hirth: Acta Metallic Materials Vol. 42 (1994), p. (2051)

Google Scholar

[18] E.O. Hall: Proc. Physical Society London Section B Vol. 64 (1951), p.747

Google Scholar

[19] S.L. Lehoczky: Physical Review Letters Vol. 41(1978), p.1814

Google Scholar

[20] P.M. Anderson, C. Li: Nanostructured Materials Vol. 5 (1995), p.349

Google Scholar

[21] G.S. Was, T. Foecke: Thin Solid Films Vol. 286 (1996), p.1

Google Scholar

[22] Z.G. Wu, G.A. Zhang, M.X. Wang, X.Y. Fan, P.X. Yan, T. Xu: Applied Surface Science Vol. 253 (2006), p.2733

Google Scholar

[23] J.M. Lackner: Industrially-scaled hybrid pulsed laser deposition at room temperature. Orekop sc., Kraków (2005)

Google Scholar

[24] P.J. Burnett, T.F. Page: Journal of Materials Science Vol. 19 (1984), p.845

Google Scholar

[25] P.J. Burnett, D.S. Rickerby: Thin Solid Films Vol. 148 (1987), p.41

Google Scholar

[26] P.J. Burnett, D.S. Rickerby: Thin Solid Films Vol. 148 (1987), p.51

Google Scholar

[27] B.R. Lawn, A.G. Evance, D.B. Marshall: Journal of American Ceramics Society Vol. 63 (1980), p.574

Google Scholar

[28] H. Ichimura, Y. Ishii, A. Rodrigo: Surface and Coatings Technology Vol. 169-170 (2003), p.735

Google Scholar

[29] S.J. Bull: Thin Solid Films Vol. 398-399 (2001), p.291

Google Scholar

[30] X. Chu, S.A. Burnett: Journal of Applied Physics Vol. 77 (1995), p.4403

Google Scholar

[31] S. Tixier, P. Böni, H. Van Swygenhoven: Thin Solid Films Vol. 342 (1999), p.188

DOI: 10.1016/s0040-6090(98)01495-3

Google Scholar