Laser Remelting Effect on the Joint Property of Diffusion Bonding of TiAl Intermetallics and TC4 Alloy

Zi Gong Xue; Yuan Xun Huang; Yong Tian Wang; Xiao Jing Hai

doi:10.4028/www.scientific.net/MSF.747-748.77

Paper Titles

Numerical Analysis of Superplastic Bulging Process of TiAl Sheet
p.50

Effect of Nb Addition on the Corrosion Behavior of Porous TiAl Based Alloys in Aqueous Environments
p.57

Intrinsic Brittlement of Mo₃Si by First-Principle Calculations
p.63

Isothermal Corrosion Behaviors of TiAl–Nb Alloys in Liquid Zn-55Al-1.6Si (wt.%)
p.69

Laser Remelting Effect on the Joint Property of Diffusion Bonding of TiAl Intermetallics and TC4 Alloy
p.77

The Influence of Niobium on the Interdiffusion Coefficients in α₂and γ of TiAl Alloys
p.85

Effects of Scandium on Corrosion Resistance and Mechanical Properties of Cellular Al-Based Foams
p.93

Preparation of TiAl Intermetallic Alloy by Gelcasting
p.101

Numerical Simulation and Process Optimization of Investment Casting of the Blades for High Nb Containing TiAl Alloy
p.105

HomeMaterials Science ForumMaterials Science Forum Vols. 747-748Laser Remelting Effect on the Joint Property of...

Laser Remelting Effect on the Joint Property of Diffusion Bonding of TiAl Intermetallics and TC4 Alloy

Abstract:

The influence of laser remelting on the mechanical property and fracture behavior of the superplastic diffusion bonding between TiAl intermetallics and TC4 alloy was investigated. The joint bonded by the pre-remelted samples displayed well diffusion, but the mechanical properties of the joint should be further enhanced. The mechanical properties of the joint pre-remelted under the diffusion bonding conditions of 915/80MPa/1h are lower than that of the joint without remelting. After the heat treatment on pre-remelted joint sample at 860, the mechanical properties have been enhanced greatly.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Materials Science Forum (Volumes 747-748)

Pages:

77-84

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.747-748.77

Citation:

Cite this paper

Online since:

February 2013

Authors:

Zi Gong Xue, Yuan Xun Huang, Yong Tian Wang, Xiao Jing Hai

Keywords:

Diffusion Bonding, Laser, Mechanical Property, Remelt, TC4, TiAl

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] Y.Y. Cheng, S.Z. Zhang. Progress in β-solidifying γ-TiAl based alloys. Chinese Journal of Rare Metals[J], 2012, 1(36): 154-160.

Google Scholar

[2] L.I. Duarte, A.S. Ramos. Solid-state diffusion bonding of gamma-TiAl alloys using Ti/Al thin films as interlayers. J. Intermetallics, 2006(14): 1151-1156.

DOI: 10.1016/j.intermet.2005.12.011

Google Scholar

[3] P. He, J.C. Feng, B.G. Zhang, Y.Y. Qian. Microstructure and strength of diffusion-bonded joints of TiAl base alloy to steel. J. Materials Characterization, 2002, 48(5): 401-406.

DOI: 10.1016/s1044-5803(02)00319-4

Google Scholar

[4] A.I. Ustinov, Yu. V. Falchenko, Diffusion welding of γ-TiAl based alloys through nano-layered foil of Ti/Al system. J. Intermetallics, 2008(16): 1043-1045.

DOI: 10.1016/j.intermet.2008.05.002

Google Scholar

[5] X.F. Wang, Mo Ma, Xue-bin Liu, Xue-qing Wu, Chao-gui Tan, Rong-kai Shi, Jiang-guo Lin. Diffusion bonding of γ-TiAl alloy to Ti-6A1-4V alloy under hot pressure. J. Transactions of Nonferrous Metals Society of China, 2006, 16(5): 1059-1063.

DOI: 10.1016/s1003-6326(06)60377-4

Google Scholar

[6] G.Q. Wu, Z. Huang. Super plastic forming/diffusion bonding of laser surface melted TiAl intermetallic alloy. J. Scripta Materialia, 2001(45): 895-899.

DOI: 10.1016/s1359-6462(01)01108-3

Google Scholar

[7] W.R. Chen, J. Triantafillou, J. Beddoes, L. Zhao. Effect of fully lamellar morphology on creep of a near γ-TiAl intermetallic. J. Intermetallics, 1999(7): 171-178.

DOI: 10.1016/s0966-9795(98)00019-3

Google Scholar

[8] Z.Q. Cui, Metallography and Heat Treatment. Macmillan, China Machine Press, 2004, 233-234.

Google Scholar