Phase Transformation in Duplex Stainless Steels after Isothermal Treatments, Continuous Cooling and Cold Working

Article Preview

Abstract:

This paper concerns the phase transformation induced by heat treatment and cold rolling in four duplex stainless steel. In 2205 and 2507 , during the isothermal heat treatments, chi-phase precipitates as small particles at the ferrite/austenite boundaries, followed by sigma precipitation. At the lowest temperature the formation kinetic of chi-phase is favoured, with the increasing of time and temperature a progressive transformation of chi to sigma occurs and the kinetic of sigma is favoured. During continuous cooling, the chi -phase appears at low cooling rates. In low Ni grades the grain boundaries precipitation of chromium nitrides were detected , but no sigma and chi. In 2101 the austenite transforms to martensite both after cold rolling and quenching

You might also be interested in these eBooks

Info:

Periodical:

Materials Science Forum (Volumes 638-642)

Pages:

2986-2991

Citation:

Online since:

January 2010

Export:

Price:

[1] J.O. Nilsson, Super duplex stainless steels, Mat. Sci. Techn., vol. 8, (1992), p.685.

Google Scholar

[2] J.O. Nilsson, P. Kangas, T. Karlsson, A. Wilson, . Metallurgical and Materials Transactions 31A, (2000). p.35.

Google Scholar

[3] J. Michalska, M. Sozanska, Mater. Character. vol. 56 (, 2006), p.355.

Google Scholar

[4] I. Mészáros, Physica B, Vol. 372 (2006) p.181.

Google Scholar

[5] N. Lopez, M. Cid,M. Piuggali, M. Corrosion Science vol. 41, (1999). P. 1615.

Google Scholar

[6] I. Calliari, E. Ramous, M. Zanesco, J. Mat. Science , vol. 41, (2006)pg. 7643.

Google Scholar

[7] B. Sundman, B. Jansson B, J. -O. Andersson: Calphad, vol. 9 ( 1985)p.153.

Google Scholar

[8] J. Dobranszky, P.J. Szabo, T. Berecz, et al, Spectrochimica Acta part B vol. 59, (2004)p.; 1781.

Google Scholar

[9] A. Redjaimia, A. Proult,P., Donnadieu, J.P. Morniroli,.P., J. Mat. Science, vol. 39, (2004)p.; 2371.

Google Scholar

[10] T.H. Chen, J.R. Yang, Mat. Sci. Eng., vol. A311 (2001), p.28.

Google Scholar

[11] I. Calliari, M. Dabalà,E. Ramous, G. Straffelini, Material science Forum, Vol. 7, (2009)p.419.

Google Scholar

[12] .I. Calliari,E. Ramous, G. Straffelini, in press on Mater. Sci. Tech.

Google Scholar

[13] B.J. Lee , Met. Trans. A, vol 24A, (1993) p. (1919).

Google Scholar

[14] J.M. Hauser JM. et al., Proc. Stainless Steel '99, Science and Market, (1999), p.85.

Google Scholar