Fabrication and Corrosion Properties of Iron Aluminum Alloy/Steel Laminated Composite Prepared by Clad Rolling

Naoya Masahashi; M. Oku; Sadao Watanabe; Shuji Hanada

doi:10.4028/www.scientific.net/MSF.539-543.866

Paper Titles

Polymer Nanocomposites as Candidates for Tribological Applications
p.842

Analysis of Fine Stress Fields in Metal Matrix Composites Using HOLZ Patterns
p.848

Mechanically Alloyed P/M Composites of Al-Mg-Silicide and Al-Mg-Oxide Systems
p.854

Synthesis of Carbon Nanotube-Reinforced Al Matrix Composites
p.860

Fabrication and Corrosion Properties of Iron Aluminum Alloy/Steel Laminated Composite Prepared by Clad Rolling
p.866

Fabrication and High Temperature Creep Behavior of In Situ Synthesized (TiB+TiC)/Ti Composites
p.872

Wettability of Basal and Prismatic Plane of Graphite by Molten Aluminum-Magnesium Alloy
p.877

Fabrication of Nano-Laminar Glass/Metal Composites by Sintering Glass Flakes
p.883

Estimation of Critical Composition for the Transition from Brittle to Ductile in W-Cu Composites
p.889

HomeMaterials Science ForumMaterials Science Forum Vols. 539-543Fabrication and Corrosion Properties of Iron...

Fabrication and Corrosion Properties of Iron Aluminum Alloy/Steel Laminated Composite Prepared by Clad Rolling

Abstract:

The laminated composite of Fe–Al alloy and CrMo steel was fabricated by clad rolling to provide additional properties to the steel such as corrosion resistance, strength, and light weight. Three layered composite consisting of alloy/steel/alloy was succesfully fabricated using the process condition to satisfy the criteria for simultaneous deformation of different materials. The fabricated composite could be cold rolled to 120 μm thickness (99.8 % reduction), and wound to a coil without damage. The corrosion resistance of the composite in a sulfuric acid solution was comparable to that of monolithic CrMo steel, and it depends on the aluminium content of the Fe–Al alloy. The aluminium content dependence of the corrosion behavior is explained by the corrosion potential (Ecorr) of the Fe–Al alloy derived from the polarization curves in the solution. In order to improve the corrosion resistance of the composite, pre-oxidation treatment was conducted to form Al2O3 layer to protect the substrate. Analyses by XPS and SIMS show that the Al2O3 oxide fraction increases with the oxidization temperature and Al content of the alloy. The pre-oxidation treatment improved the corrosion resistance of the composite in a sulfuric acid solution. It is concluded that the effect of oxidation on the corrosion resistance is due to the formation of Al2O3 oxide and the Al2O3 fraction in the oxides.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Materials Science Forum (Volumes 539-543)

Pages:

866-871

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.539-543.866

Citation:

Cite this paper

Online since:

March 2007

Authors:

Naoya Masahashi, M. Oku, Sadao Watanabe, Shuji Hanada

Keywords:

Acid Corrosion, Aluminium Oxide, Clad Rolling, Fe-Al Alloy, Pre-Oxidation

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] C.G. McKamey, J.H. Devan, P.F. Tortorelli and V.K. Sikka: J. Mater. Res., Vol. 6 (1991), p.1779.

Google Scholar

[2] N. Masahashi, K. Komatsu, S. Watanabe and S. Hanada: J. Alloy Compd., Vol. 379 (2004), p.272.

Google Scholar

[3] N. Masahashi, S. Watanabe, N. Nomura, S. Semboshi and S. Hanada: Intermetallics, Vol. 13 (2005), p.717.

DOI: 10.1016/j.intermet.2004.12.017

Google Scholar

[4] N. Masahashi, G. Kimura, M. Oku, K. Komatsu, S. Watanabe and S. Hanada: Corros. Sci., Vol. 48 (2006), p.783.

Google Scholar

[5] X. Gomez and J. Echeberria: Mat. Sci. and Eng. A348, (2003), p.180.

Google Scholar

[6] M.F. Lopez and M.L. Escudero: Electrochim. Acta, Vol. 43, (1998), p.671.

Google Scholar

[7] M.L. Escudero, M.C. García-Alonso, J.L. Gonzalez-Carrasco, M.A. Muñoz-Morris, M.A. Montealegre, C. Garcia Oca, D.G. Morris and S.C. Deevi: Scripta Mater., Vol. 48, (2003), p.1549.

Google Scholar

[8] G. Kimura, N. Masahashi, S. Watanabe and S. Hanada: Collected Abstracts of the 2004 Fall Meeting of the Japan Inst. Metals, (2004), p.284.

Google Scholar

[9] M. Oku and K. Hirokawa: J. Appl. Phys., Vol. 50, (1979), p.6303.

Google Scholar