Wrinkling Limit Based on FEM Virtual Experiment during NC Bending Process of Thin-Walled Tube

Heng Li; He Yang; Mei Zhan; L.G. Guo; R.J. Gu

doi:10.4028/www.scientific.net/MSF.471-472.498

Paper Titles

Development of Endless Diamond Wire Saw and Sawing Experiments
p.481

Neural Network Prediction of Segment Wear in Stone Sawing
p.485

A Study on Computer Simulation of Plastic Lens Molding Process
p.490

Design of High Precision Power Supply for Low-Frequency Vibration Cutting
p.494

Wrinkling Limit Based on FEM Virtual Experiment during NC Bending Process of Thin-Walled Tube
p.498

Forming Defects Analysis of Auto-Panel Stamped Part with Experimental Strain Approach
p.503

Machine Vision and Data Reconstruction for Measuring Free Form Surface
p.508

Development of an Internet-Based Interactive Globoidal Indexing Cam Mechanisms Design System
p.513

Time Series Model Study on the NC Grinding Process of Isometric Polygonal Profile
p.518

HomeMaterials Science ForumMaterials Science Forum Vols. 471-472Wrinkling Limit Based on FEM Virtual Experiment...

Wrinkling Limit Based on FEM Virtual Experiment during NC Bending Process of Thin-Walled Tube

Abstract:

A definition of forming limit is given with minimum centerline radius min R before wrinkling for NC bending process of thin-walled tube. Based on the developed FEM wrinkling prediction system TBWS-3D, an effective searching algorithm of wrinkling limit is proposed and forming limit can be obtained conveniently. Thus influence laws of main forming parameters on wrinkling limit are investigated and revealed. Measures to improve forming limit is put forward consequently. The achievements may help to both practice of thin-walled precise tube bending and research of plastic wrinkling.

You might also be interested in these eBooks

Advances in Materials Manufacturing Science and Technology

View Preview

Info:

Periodical:

Materials Science Forum (Volumes 471-472)

Pages:

498-502

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.471-472.498

Citation:

Cite this paper

Online since:

December 2004

Authors:

Heng Li, He Yang, Mei Zhan, L.G. Guo, R.J. Gu

Keywords:

Finite Element Model (FEM), NC Bending, Thin-Walled Tube, Wrinkling, Wrinkling Limit

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] H. Yang, Z.C. Sun, Y. Lin, et al: J. of Plastic Eng. Vol. 8 (2001), p.86.

Google Scholar

[2] X. Wang, J. Cao: Trans. of the ASME Vol. 123 (2001), p.430.

Google Scholar

[3] Y. Lin: Numerical Simulation of Wrinkling Onset during the NC Bending Process of Thin-walled Tube (Ph.D. Dissertation, Northwestern Polytechnical University, China 2003) (in Chinese).

Google Scholar

[4] Y. Lin, H. Yang and H. Li: Acta Aeronautica Et Astronautica Sinica Vol. 24 (2003), p.456.

Google Scholar

[5] S. Kobayashi: Metal Forming and the Finite-Element Method (Oxford University Press, 1989).

Google Scholar

[6] H. Li: Research on Wrinkling and Forming Limit of NC Bending Process of Thin-walled Tube (M.D. Dissertation, Northwestern Polytechnical University, China 2004) (in Chinese).

Google Scholar

[7] T.H. Wang: Tube Forming Technology (Mechanical Industry Press, China 1998). (in Chinese) Minimum bending radius mm.

Google Scholar