Finishing Effect and Uniformity on Gas-Particle Two-Phase Swirling Flows Finishing for Hole Surface

Sheng Qiang Yang; Wen Hui Li; Shi Chun Yang

doi:10.4028/www.scientific.net/AMR.97-101.4124

Paper Titles

Surface Roughness Characteristics of Fine ELID Cross Grinding for Silicon Wafers
p.4106

Chip-Ejection Mechanism and Experimental Study of Water Dispersant Dielectric Fluid on Small-Hole EDM
p.4111

Finishing Clearance Research on Magnetic Abrasive Finishing
p.4116

Research of Uniformity and Effect on Crankshaft Barrel Finishing
p.4120

Finishing Effect and Uniformity on Gas-Particle Two-Phase Swirling Flows Finishing for Hole Surface
p.4124

Simulation and Experiment Research on the Swirling Airflow Compounded with Magnetic-Field Finishing
p.4128

Study on Bio-Limited Forming Technology Based on Micro-Composite Sol-Gel Coating
p.4132

Study on the Conditions of Near-Field Acoustic Levitation
p.4135

The Function of Magnetic Field in a Magnetic-Electrochemical Compound Polishing
p.4141

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 97-101Finishing Effect and Uniformity on Gas-Particle...

Finishing Effect and Uniformity on Gas-Particle Two-Phase Swirling Flows Finishing for Hole Surface

Abstract:

For precise hole surfaces, the burr severely affects products’ performance and service life. Considering specific conditions of hole surface finishing, a new method of gas-particle two-phase swirling flows finishing is brought up. By experimental analysis, finishing effect and axial uniformity are defined, which provides credible basis for thorough research, equipment design and industrial application.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 97-101)

Pages:

4124-4127

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.97-101.4124

Citation:

Cite this paper

Online since:

March 2010

Authors:

Sheng Qiang Yang, Wen Hui Li, Shi Chun Yang

Keywords:

Finishing, Finishing Effect, Gas-Particle, Two-Phase Swirling Flows, Uniformity

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] Yang, S.C. Surface Quality and Finishing Technology(Machinery Industry Press, China 2001). (In Chinese).

Google Scholar

[2] Yang, S.Q., Yang, S.C. and Li, W.H. Key Engineering Materials, Vols. 259-260(2004), pp.549-552.

Google Scholar

[3] Shengqiang Yang, Wenhui Li, and Shichun Yang. Key Engineering Materials, Vol. 416(2009), pp.342-347.

Google Scholar

[4] Yang, S.Q., Yang, S.C. and Li, W.H. Key Engineering Materials, Vols. 259-260(2004), pp.544-548.

Google Scholar

[5] S.Q. Yang, W.H. Li and S.C. Yang. The 4TH IEEE Conference on Industrial Electronics and Applications, (2009).

Google Scholar

[6] S.Q. Yang, W.H. Li and S.C. Yang. Advanced Materials Research ， Vols. 24-25(2007), pp.273-278.

Google Scholar