Experimental Study on Tension Performance of Anchor Group

Ying Li Liu; Tie Zhu Jiang; Jun Hong Huan; Fu Quan Xu

doi:10.4028/www.scientific.net/AMR.912-914.666

Paper Titles

Dynamic Contact Simulation Analysis of Spiral Bevel Gear Based on ANSYS/LS-DYNA
p.649

Dynamic Modeling Based on Zero Side-Slip Angle of the Gravity Center for Multi-Axis Steering Vehicles
p.653

Vehicle Driving Axle Half Shaft Fracture Analysis
p.658

Electromechanical Coupling Vibration of Rolling Mill Excited by Variable Frequency Harmonic
p.662

Experimental Study on Tension Performance of Anchor Group
p.666

Failure Research of Vehicle ABS Based on Fuzzy Diagnosis Technology
p.675

Fault Analysis of Stator Inter-Turn Short Circuit in Doubly Fed Induction Machines
p.679

Geothermal Energy Saving Air Conditioning System Research
p.684

Hardware Circuit Design of a Wire Rope Tension Monitoring System for Main Shaft Hoist
p.687

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 912-914Experimental Study on Tension Performance of...

Experimental Study on Tension Performance of Anchor Group

Abstract:

The torque-controlled expansion anchors, undercut anchors,bonded anchors and special inverted conical chemical anchors subjected to tension load, which including single anchor, two anchors, four anchors and eight anchors are tested. Failure mode and tension performance of anchor group are investigated, and test value and calculative value of ultimate load are compared. Experimental results show that some anchor group occur the concrete cone failure under tension load, and others occur steel failure under tension load. Test value and calculative value of ultimate load are compared, and the result meets well.

You might also be interested in these eBooks

Frontiers of Advanced Materials and Engineering Technology II

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 912-914)

Pages:

666-674

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.912-914.666

Citation:

Cite this paper

Online since:

April 2014

Authors:

Ying Li Liu*, Tie Zhu Jiang, Jun Hong Huan, Fu Quan Xu

Keywords:

Anchor Group, Concrete Cone Failure, Steel Failure, Ultimate Tension Load

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] Li Zhan-hong. Experimental study on the tensile capacity of post-installed rebar specimens under high temperature[D]. shanghai: Tongji university. 2007: 1-3.

Google Scholar

[2] Zhou Xin-gang, Wang You-xuan, Qu Shu-ying. Ultimate load carrying capacity analysis of adhesively bonded bars in concrete[J]. Engineering Mechanics, Vol. 19 No. 6, (2002).

Google Scholar

[3] He Xuan, Bu Ji-bin. The common quality problems of expansion bolts and chemical anchor installed in curtain wall engineering[j]. Guangdong architecture civil engineering, 2004, (8) 8：45-47.

Google Scholar

[4] Wang Cui-kun, Xiao Cong-zhen, Zhao xi-an. Test of anti-vibration performance of anchor[J]. Architecture Technology, 2004, (35)9: 691-692.

Google Scholar

[5] Zhang Shu-guang, Li Wei. The technology analysis of post-installed is used in concrete[J]. Journal of industrial technological economics, 2003, (126)2: 141-143.

Google Scholar

[6] Wang Mo-lin, Han Ji-yun, Di Xiao-tan. Technical specification post-installed fastenings in concrete structures (JGJ145-2004) [M]. Beijing: China anchitecture building press, 2004: 47.

Google Scholar