Grinding Force Model for Low-Speed Grinding Based on Impact Principle

Ming He Liu; Xiu Ming Zhang; Shi Chao Xiu

doi:10.4028/www.scientific.net/AMR.797.123

Paper Titles

Compensation and Experiment Research of Machining Error for Optical Aspheric Precision Grinding
p.103

Dynamics Modeling of Cavitation Bubble in the Grinding Area of Power Ultrasonic Honing
p.108

Experimental Studies on Forces and Specific Energy in High Speed Grinding of Titanium Alloy Ti6Al4V
p.112

Study on the Effect of Coarse Grinding Area Slope Angle on Surface Quality in Point Grinding
p.118

Grinding Force Model for Low-Speed Grinding Based on Impact Principle
p.123

Ultraprecision Lapping for the Zirconia Ceramic Plane
p.129

Experimental Study on the Ultra-Precision Polishing for the Quartz Substrates
p.135

High-Accuracy Calibration of the Wheel Spindle Tilt Angle for Grinding Hydrostatic Seal Rings Used in Reactor Coolant Pumps
p.140

Experimental Study on the Thread Turning Performance of Two TiAlN Coated Thread Inserts with Different Features
p.149

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 797Grinding Force Model for Low-Speed Grinding Based...

Grinding Force Model for Low-Speed Grinding Based on Impact Principle

Abstract:

In the low-speed grinding process, the force generated when the wheel grinding the workpiece is the result of sliding friction, plough and cutting. While in the actual study, the cutting process has attracted extensive attention. Impact effect to the entire grinding process on the contact is ignored so that the error exists between the calculation grinding force and the measured grinding force. Basing on the shock effect to the grinding process, the paper divides the contact area into impact area and cutting area. And the model of impact load generated from single grit is built. Moreover, the grinding force theoretical calculation model and total grinding force mathematical model is also constructed by analyzing the impact load affecting on the grinding force mechanism. Finally experimental study verifies the correctness of theoretical analysis.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 797)

Pages:

123-128

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.797.123

Citation:

Cite this paper

Online since:

September 2013

Authors:

Ming He Liu, Xiu Ming Zhang, Shi Chao Xiu

Keywords:

Grinding Force, Impact Area, Impact Load, Low-Speed Grinding

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] Zhang Youzhen: Metal cutting theory (Aviation Industry Press, China, 1988).

Google Scholar

[2] Z. Wang and P. Willett et al.: International Journal of Machine Tools and Manufacture, vol. 41-2, (2001), p.283~309.

Google Scholar

[3] S. Kawamura, M. Mitsuhashi: J. JSPE. vol. 47-9(1981), p.106~111.

Google Scholar

[4] Liu Minghe, Wei Jianhen, Zhang Xiuming, Xiu Shichao: Journal of Northeastern University，vol. 33-10 (2012), p.1474~1478.

Google Scholar

[5] Zhao Henghua, Cai Guangqi: China Mechanical Engineering, vol. 15-12 (2004), p.1038~1041.

Google Scholar

[6] Zhu Xinghua: Grinding principle (Mechanical Industry Press, China, 1988).

Google Scholar

[7] Wang Shengli, Li Beizhi, Pang Jingzhu, Yang Jianguo: Precise Manufacturing & Automation. vol. 3 (2008), p.10~14.

Google Scholar

[8] Zhang Jianhua, Ge Peiqi, Zhang Lei: China Mechanical Engineering, vol. 18-20(2007), p.2399~2402.

Google Scholar

[9] Xiu Shichao, Cai Guangqi, Gong Yadong, Li Changhe: China Mechanical Engineering, vol. 16-23 (2005), p.2086~(2089).

Google Scholar

[10] Wang Junming, Ye Renzhen, Tang Yangping, Bin Hongzan: Diamond & Abrasives Engineering. vol. 30-1(2010), p.67~70.

Google Scholar