Study on Treatment of Cellulose Fuel Ethanol Wastewater and Application

Article Preview

Abstract:

A combination process of cellulosic ethanol wastewater treatment was described. This process includes iron-carbon micro-electrolysis-Fenton, UASB and MBR. Through the process, well get an exploration of engineering design operation parameters and pollutant removal mechanism. Test results show that if the wastewater have 5 hours micro response,36 hours to stay on the USAB and 25 hours to stay in the membrane bioreactor ,after the flocculation decollating, the COD and ammonia nitrogen indexes of the wastewater have all reached the discharge standard of the Discharge Standard of Water Pollutants for Fermentation Alcohol and Distilled Spirits Industry (GB 276312011), and the effect of the operation is stable, cost is low.

You might also be interested in these eBooks

Info:

Periodical:

Pages:

365-369

Citation:

Online since:

September 2013

Authors:

Export:

Price:

[1] Sukumaran R K, Singhania R R, Mathew G M, et al. Cellulase production using biomass feed stock and its application in lignocelluloses saccharification for bio-ethanol production, J. Renewable Energy, 34 (2009) 421-424.

DOI: 10.1016/j.renene.2008.05.008

Google Scholar

[2] Pimentel D, Patzek T W. Ethanol production using corn, switch grass, and wood; biodiesel production using soybean and sunflower, J. Natural Resources Research, 14(2005)65-76.

DOI: 10.1007/s11053-005-4679-8

Google Scholar

[3] Farrell A E, Plevin R J, Turner B T, et al. Ethanol can contribute to energy and environmental goals, J. Science, 311(2006) 506-508.

DOI: 10.1126/science.1121416

Google Scholar

[4] Zhang Jian, Ji Junjie, Xu Naidong. Study on iron-carbon fluidized bed process for pretreatment of dyestuff wastewater, J. China Water and wastewater, 17(2001)6-9.

Google Scholar