Methodical Basis of Investigation of Influence of the Iron Ore Materials and Coke Metallurgical Characteristics on the Blast Furnace Smelting Efficiency
p.365
p.365
Effect of Ce on the Inclusions and Pitting Resistance of 2Cr13 Stainless Steel
p.376
p.376
Effect of Two-Phase Region Quenching Temperature on Microstructure Evolution and Microhardness of HSLA100 Steel
p.380
p.380
Influence of Annealing Temperature on Microstructure and Properties of the Hot-Stamping Boron Steel
p.385
p.385
Research on Plastic Inclusions Control for Steel Cord
p.390
p.390
Research on the Effects of the Refining Treatment to the Properties of Dual-Phase Wear-Resistant Steel
p.395
p.395
Effect of Strain Rate on Dynamic Recrystallization Behavior for V Micro-Alloy High-Carbon Steel
p.401
p.401
Effects of Spray Forming and Aging Treatment on the Microstructures and Hardness of H13 Tool Steel
p.405
p.405
Effects of Quenching Medium on the Microstructures and Mechanical Properties of 42CrMo Steel
p.411
p.411
Research on Plastic Inclusions Control for Steel Cord
Abstract:
The inclusions will be controlled in the plastic region effectively when the slag basicity is in the range of 0.5~1.2 and Al2O3 content in the range of 10%~25% according to thermodynamic calculation. The results of laboratory research show that the value of (CaO+MgO)/SiO2 and Al2O3 content will rise up with the increase of [Als]. Therefore, [Als] should be less than 6×10-6. Furthermore, inclusions in steel cord will be controlled plastically in laboratory with the slag basicity in the range of 0.8~1.0 and Al2O3 content in the range of 0%~10%.
You might also be interested in these eBooks
Info:
Periodical:
Advanced Materials Research (Volumes 602-604)
Pages:
390-394
Citation:
Online since:
December 2012
Authors:
Keywords:
Price:
Permissions: