Modeling and Simulation for Nutation Drive with Rolling Teeth

Guang Xin Wang; Lin Jie Li; Hong Guan; Tian Min Guan

doi:10.4028/www.scientific.net/AMR.538-541.470

Paper Titles

Study on the Critical Plastic State of the Simply Supported Beam under Non-Linear Hardening Model
p.453

Comparison and Verification Analysis on the Fitting Curves of Several Different Creep Models
p.458

Numerical Simulation of the 3D Turbulent Flow Field in a Cross-Flow Fan Used in the Air Conditioner
p.462

Design and FEA of 125T Face Shovel Excavator’s Arm
p.466

Modeling and Simulation for Nutation Drive with Rolling Teeth
p.470

Numerical Simulation of LPDC Process for Thin-Walled Aluminum Alloy
p.474

Kinematics Simulation of Parallel Mechanism Based on ADAMS
p.479

Mathematical Model of Coal Mine Gas and Coal Dust Control
p.483

Numerical Simulation of Effect of X-Shape Submerged Nozzle on Flow of Molten Steel in Mold
p.490

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 538-541Modeling and Simulation for Nutation Drive with...

Modeling and Simulation for Nutation Drive with Rolling Teeth

Abstract:

According to the nutation movement of a rotating coin on a table, a novel nutation drive with rolling teeth is presented on the basis of oscillating teeth gear transmission. Firstly, the structure of mechanism is provided and transmission theory is declared. The formulae for calculating the transmission ratio of the mechanism is developed. Secondly, the modeling of this nutation drive is built. Finally, the results of theoretical calculations are verified by dynamic motion simulation of the prototype mechanism. In addition, Numerical control(NC) simulation of machining the stator and the rotor gears is developed.