Sponsors and Committees
Preface
Compound Finish Processes Using Burnishing and Ultrasonic Electrochemical Finishing on Hole-Wall Surface
p.3
p.3
Simulation of Flows Field Characteristics in the Nozzle of Two-Phase Compulsive Circulation Flows Finishing
p.9
p.9
Process Characteristics Research on Horizontal Spindle Barrel Finishing
p.15
p.15
Modeling and Experiment of Anodic Smoothening in Electrochemical Finishing Based on Lateral Direction Dissolution
p.21
p.21
Experimental Investigation on Electrochemical Finishing Machining of Stainless Steel in Passive Electrolyte Solution
p.27
p.27
Compliant Control at Micro-Displacement in Hydrodynamic Suspension Ultra-Smooth Machining
p.33
p.33
Theoretical Analysis and Experimental Verification of Validity Finished by Abrasive Jet with Grinding Wheel as Restraint
p.39
p.39
Process Characteristics Research on Horizontal Spindle Barrel Finishing
Abstract:
At present, crankshafts are finished mostly by abrasive cloth and manual steel brush, which is not ideal on finishing quality, efficiency and cost, especially cleanness degree does not meet design and use request. So horizontal spindle barrel finishing has been developed. Based on its finishing theory, process characteristics are key factors affecting the finishing effect, especially finishing uniformity. Process characteristics of motion parameters, finishing depth, finishing time, etc. are analyzed, and reasonable parameters are defined. It provides basis for industry application of this process.
You might also be interested in these eBooks
Info:
Periodical:
Advanced Materials Research (Volumes 53-54)
Pages:
15-19
Citation:
Online since:
July 2008
Authors:
Keywords:
Price:
Permissions: