Application of Ductile Fracture Criteria to Industrial Cutting Processes

Jindrich Petruška; Jan Borkovec; Jiri Hulka; Rudolf Foret

doi:10.4028/www.scientific.net/AMR.264-265.913

Paper Titles

Machinability Improvement by Workpiece Preheating during End Milling AISI H13 Hardened Steel
p.888

Machinability Improvement by Workpiece Preheating during End Milling AISI H13 Hardened Steel
p.894

Performance Evaluation of PCBN in End Milling of AISI D2 Hardened Steel under Room and Preheated Machining Conditions
p.901

Multi-Criteria Optimization in End Milling of AISI D2 Hardened Steel Using Coated Carbide Inserts
p.907

Application of Ductile Fracture Criteria to Industrial Cutting Processes
p.913

Principal Methods of Experimental Design and Statistical Analysis Used in Experimental Studies of Machining Processes
p.919

Small Hole EDM by Current Dividing Based on Discharging Area
p.925

Analysis of the Machinability of Aluminium Alloys UNS A97050-T7 and UNS A92024-T3 during Short Dry Turning Tests
p.931

Analysis of the Vitrified CBN Wheels for the Performance of Grinding Hardened Steel
p.937

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 264-265Application of Ductile Fracture Criteria to...

Application of Ductile Fracture Criteria to Industrial Cutting Processes

Abstract:

Experimental and numerical studies of fracture prediction with Czech steel no.41 2050 are presented. Seven ductile fracture criteria were calibrated, applied to simulation of rod cutting and bolt head trimming operation and compared with experimental results of these processes, obtained in semi-industrial conditions in cooperation with our industrial partner. Movement of the cutting tool was stopped in predefined positions, so that a step-by-step mapping of subsequent stages of both processes were obtained at different specimens. By metallographic analysis of these, full view of plastic deformation and damage in the vicinity of the cutting region could be seen, and their comparison with the computational results was done.

You might also be interested in these eBooks

Advances in Materials and Processing Technologies II

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 264-265)

Pages:

913-918

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.264-265.913

Citation:

Cite this paper

Online since:

June 2011

Authors:

Jindrich Petruška, Jan Borkovec, Jiri Hulka, Rudolf Foret

Keywords:

Criteria Calibration, Cutting Simulation, Ductile Fracture

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] T. Wierzbicky, Y. Bao, Y.W. Lee, Y. Bai, Calibration and evaluation of seven fracture criteria, International Journal of Mechanical Sciences, Vol. 47 (2005), 719-743.

DOI: 10.1016/j.ijmecsci.2005.03.003

Google Scholar

[2] Y. Bao, T. Wierzbicki, On the cut-off value of negative triaxiality for fracture, Engineering Fracture Mechanics, Vol. 72 (2005), 1049–1069.

DOI: 10.1016/j.engfracmech.2004.07.011

Google Scholar

[3] J. Borkovec, Computational simulation of material cutting (in Czech), PhD Thesis, Brno University of Technology (2008).

Google Scholar

[4] M. A. Shabara, A. A. El-Domiaty and A. Kandil, Validity Assessment of Ductile Fracture Criteria in Cold Forming, J. Mat. Eng. and Performance, Vol. 5, (1996), 478-488.

DOI: 10.1007/bf02648845

Google Scholar

[5] R. Johnson and W. H. Cook, Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures, Eng. Fract. Mech., Vol. 21, (1985), 31-48.

DOI: 10.1016/0013-7944(85)90052-9

Google Scholar

[6] Y. Bao, Prediction of Ductile Crack Formation in Uncracked Bodies, PhD Thesis, MIT (2003).

Google Scholar

[7] S. Oh, C.C. Chen, S. Kobayashi, Ductile failure in axisymmetric extrusion and drawing Journal of Engineering for Industry, Vol. 101 (1979), 36–44.

DOI: 10.1115/1.3439471

Google Scholar

[8] M.L. Wilkins, Computer Simulation of Dynamic Phenomena. Berlin: Springer-Verlag (1999).

Google Scholar

[9] J.R. Rice, D.M. Tracey, On the ductile enlargement of voids in triaxial stress fields, Journal of the Mechanics and Physics of Solids, Vol. 17 (1969), 201-217.

DOI: 10.1016/0022-5096(69)90033-7

Google Scholar

[10] R. Törnqvist, Design of Crashworthy Ship Structures, University of Denmark, (2003).

Google Scholar