Clad Strip Casting Using a Twin Roll Casters

Ryoji Nakamura; Toshio Haga; H. Tsuge; S. Kumai; H. Watari

doi:10.4028/www.scientific.net/AMR.189-193.4037

Paper Titles

Effect of Magnetostatic Field on Microstructure of 5005 Aluminum Alloy Sheet by Roll-Casting
p.4018

Effects of Submerged Heater on the Vertical Bridgman Crystal Growth
p.4022

Experimental Modal Analysis in Casting Production Applications
p.4028

Study on Unidirectional Solidification of Slab Ingot for Special Heavy Plate
p.4033

Clad Strip Casting Using a Twin Roll Casters
p.4037

Development of Basalt Fiber Reinforced Wood-Plastic Composite Materials
p.4043

Parameter Calibration Method Based on Screw Theory for Articulated Coordinate Measuring Arm
p.4049

Sapphire-SiO₂ Solid-Phase Reaction of Polishing Proving Research
p.4053

Experimental Study on the Surface Micro-Geometrical Characteristics of Quenched Steel in Ultrasonic Assisted Turning
p.4059

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 189-193Clad Strip Casting Using a Twin Roll Casters

Clad Strip Casting Using a Twin Roll Casters

Abstract:

The three layers clad strip was fabricated by a vertical type tandem twin roll caster for clad strip (VTTCC). The effect of the casting conditions of the base strip and the overlay strip on the interface between the base strip and the overlay strip was investigated. The temperature of the molten metal and roll-load were investigated casting conditions. Base strip was AA8079 and overlay strip was AA6022. The proper melt temperature of the overlay strip was around the liquidus line of the base strip. The proper roll-load, which was smaller than rolling, was existed.