Effect of Surface Enlargement and of Viscosity of Lubricants on Friction Behaviour of Advanced High Strength Steel Material during Deep Drawing

Markus Singer; Mathias Liewald

doi:10.4028/www.scientific.net/AMR.1018.253

Paper Titles

Composite Hot Extrusion of Functional Elements
p.223

Considering Anisotropic Material Behaviour of Sheet Metals for Ductile Fracture Prediction
p.229

Design of an Electromagnetic System to Avoid Horizontal Ram Displacement
p.237

Development of a Pneumatic Bulge Test for High Temperatures and Controlled Strain Rates
p.245

Effect of Surface Enlargement and of Viscosity of Lubricants on Friction Behaviour of Advanced High Strength Steel Material during Deep Drawing
p.253

Experimental and Numerical Analysis of Dry Shearing of Aluminum 6082
p.261

Influence of Manufacturing Process on the Fatigue Strength of Gears
p.269

Decrease of Springback by Geometrical Modification of the Sheet Metal Part
p.277

Process Chains for Fibre Metal Laminates
p.285

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 1018Effect of Surface Enlargement and of Viscosity of...

Effect of Surface Enlargement and of Viscosity of Lubricants on Friction Behaviour of Advanced High Strength Steel Material during Deep Drawing

Abstract:

Increasing demands on vehicle safety and weight reduction in the automotive industry lead to an increased use of “advanced high strength steels” for car body manufacturing purposes. Mentioned material grades are having high levels of tensile strength and are often used in conventional sheet metal forming processes. One of the most significant factors on quality of stamped components as well as its manufacturing process robustness is the friction between tool and sheet material. During the deep drawing process, superposition of tensile stresses is causing enlargement of the sheet surface by a few percent. This effect can damage the zinc layer. Due to that fact, lubricant has to keep tool and work piece separated in order to prevent adhesion and abrasion. For that very reason, sufficient amount of lubricant has to be applied onto the surface texture reservoirs. Furthermore, the viscosity of lubricant is mainly influencing its ability of wetting the surface. The aim of this study is to define the relationship between friction coefficient, surface enlargement and lubrication having different viscosities. In this investigation the same amount of lubricant with viscosity of ϑ=65 mm²/s, ϑ=200 mm²/s and ϑ=400 mm²/s was applied on strips made out of DP1000 and DC04 steel. Then, the strips were stretched uniaxially, and restraining forces were measured by strip draw test considering constant surface pressure and drawing speed. In this paper, the correlation between friction coefficient, viscosity and surface enlargement for two different sheet material grades is shown.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 1018)

Pages:

253-260

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.1018.253

Citation:

Cite this paper

Online since:

September 2014

Authors:

Markus Singer*, Mathias Liewald

Keywords:

Friction, Lubrication, Surface Enlargement

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] P. Groche, M. Christiany, Qualifizierung neuer Tribosysteme zur Umformung höchstfester Stahlbleche, EFB-Forschungsbericht Nr. 363, (2013).

Google Scholar

[2] WorldAutoSteel, Advanced High Strength Steel (AHSS) Application Guidelines, Technical Report v. 4. 1, (2009).

Google Scholar

[3] T. Neudecker, Tribologische Eigenschaften keramischer Blechumformwerkzeuge – Einfluss einer Oberflächenendbearbeitung mittels Excimerlaserstrahlung, Dr. -Ing. Dissertation, Universität Erlangen-Nürnberg, (2004).

Google Scholar

[4] E. Billur, T. Altan, Three generations of advanced high-strength steels for automotive applications, Part I, Stamping Journal, November/ December (2013), 16-17.

Google Scholar

[5] A. Papaiouanu, M. Liewald, Weiterentwicklung eines SCS Streck- und Tiefzieh-werkzeuges zur Herstellung von Türaußenhautteilen, www. utfscience. de I/(2010).

Google Scholar

[6] H. Czichos, K. -H. Habig, Tribologie-Handbuch, Tribometrie, Tribomaterialien, Tribotechnik, Vieweg+Teubner, Wiesbaden, (2010).

DOI: 10.1007/978-3-658-29484-7

Google Scholar

[7] E. van der Heide, A.J. Huis in 't Veld , D.J. Schipper, The effect of lubricant selection on galling in a model wear test, Wear 251, (2001), 973–979.

DOI: 10.1016/s0043-1648(01)00761-x

Google Scholar

[8] N. Bay, D.D. Olsen, J.L. Andreasen, Lubricant test methods for sheet metal forming, Tribology International 41 (2008), 844–853.

DOI: 10.1016/j.triboint.2007.11.017

Google Scholar

[9] M. Liewald, S. Wagner, D. Becker, New approaches on Coulomb's friction model for anisotropic sheet metal forming applications, Proceedings of the 9th ESAFORM Conference on Material Forming, (2006).

Google Scholar

[10] T. Blake, Y. Shikhmurzaec, Dynamic wetting by liquids of different viscosity, Journal of Colloid and Interface Science 253, (2002), 196-202.

DOI: 10.1006/jcis.2002.8513

Google Scholar

[11] Information on http: /pdf. directindustry. de/pdf/nanofocus/nanofocus-technologiebroschure/25059-351869. html (9 April 2014).

Google Scholar

[12] R. Leach, Characterization of Areal Surface Texture, Springer, Berlin Heidelberg, (2013).

Google Scholar

[13] J. Staeves, Beurteilung der Topografie von Blechen im Hinblick auf die Reibung bei der Umformung, Dr. -Ing. Dissertation, TU Darmstadt, (1998).

Google Scholar